Skip to the content
2 layers58.4 × 81.3 mmТКП-1.25.B-1, the printed circuit board in 3D

ТКП-1.25.B-1

Adept666/stompboxes10

-ТТКРЧПДЛ-

Size
58.4 × 81.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
29
Pads
107
Tracks, vias
169, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
28 Jun 2020
Updated
19 Oct 2026

Overview

ТКП-1.25.B-1 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 81.3 mm with 46 parts on 29 nets, routed with 169 tracks and 0 vias.

It is built around the B4B-XH-A. Its parts include 20 resistors, 9 capacitors, 2 crystals and 1 diode.

Main components

1

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Big Muff [REV3]

Gerber

Bass

Schematic

F_Fab

B_Fab

Bass SM

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

NYC SM

Schematic

F_Fab

B_Fab

Big Muff [REV2]

Gerber

Bass

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

Crumbwave Multiplexer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Schematic

F_Fab

B_Cuts

B_Jumpers

Gerber (Main Board)

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Schematic

F_Fab

B_Fab

Gerber

Little Angel Chorus [REV1]

Schematic

F_Fab

B_Fab

Gerber

Salty Phaser [REV1]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

F_Jumpers

B_Jumpers

Gerber

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

Schematic

F_Fab

B_Fab

Gerber

[REV1A]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

B_Jumpers

Gerber

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

  • Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.

  • Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.

  • Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Parts

46
QtyValueFootprintReferences
4473KCL-TH-ML:R-MFR-25R7, R15, R17, R20
35088KCL-TH-ML:P-TO-92-E-B-CVT1, VT2, VT3
2103KCL-TH-ML:R-MFR-25R11, R12
2104KCL-TH-ML:C-DISK-D04.2-T03.0-P05.08-d0.5C1, C2
2105KCL-TH-ML:R-MFR-25R2, R3
2204KCL-TH-ML:R-MFR-25R16, R18
2225KCL-TH-ML:R-MFR-25R1, R13
2303KCL-TH-ML:R-MFR-25R5, R8
2474KCL-TH-ML:C-DISK-D04.2-T03.0-P05.08-d0.5C5, C7
2COMKCL-TH-ML:CON-PAD-S-1.0-1.9X1, X2
2DI5M3x18KCL-TH-ML:VMH-STA-DA5-PNL-3.0VMH1, VMH2
1105SBKCL-TH-ML:C-DISK-D04.2-T03.0-P05.08-d0.5-OR-CP-RADIAL-D05.0-P02.0-CLSC6
1112KCL-TH-ML:R-MFR-25R10
11590N1SBEL:1590N1_A1VE1
11590N1 Connector BoardSBKCL-VIRTUAL:XB-1590N1XB1
1223KCL-TH-ML:C-DISK-D04.2-T03.0-P05.08-d0.5C9
1224KCL-TH-ML:C-DISK-D04.2-T03.0-P05.08-d0.5C8
1226KCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLSC3
1273KCL-TH-ML:R-MFR-25R4
1333KCL-TH-ML:R-MFR-25R14
1334KCL-TH-ML:R-MFR-25R19
1393KCL-TH-ML:R-MFR-25R9
14558KCL-TH-ML:P-DIP-08D1
1472KCL-TH-ML:R-MFR-25IND.R1
1475SBKCL-TH-ML:C-DISK-D04.2-T03.0-P05.08-d0.5-OR-CP-RADIAL-D05.0-P02.0-CLSC4
1683KCL-TH-ML:R-MFR-25R6
1A100K-A100KSBKCL-TH-ML:RPB-1590N1-18-2x17-1.6-PNL-7.4-2.8RPB1
1B4B-XH-AKCL-TH-ML:CON-XH-B4B-AXP1
1BR-12.7KCL-VIRTUAL:VLS-BRVLS1
1FYL-5013URCKCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3HL1
1MTS-102-A2KCL-TH-ML:SW-MTS-102-A2-3.0-PNL-6.0SA1
1PBS-24-302SPKCL-TH-ML:SW-PBS-24-302SP-2.5-PNL-13.0SB1

More from Adept666/stompboxes

12
  • 2 layers86.4 × 111.8 mmТКП-1.23.B-1, the printed circuit board in 3D

    ТКП-1.23.B-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    214 parts10
  • 2 layers86.4 × 111.8 mmТКП-1.23.A-1, the printed circuit board in 3D

    ТКП-1.23.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    160 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-2, the printed circuit board in 3D

    ТКП-1.38.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    122 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-1, the printed circuit board in 3D

    ТКП-1.38.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    121 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.37.A-1, the printed circuit board in 3D

    ТКП-1.37.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    118 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-3, the printed circuit board in 3D

    ТКП-1.36.A-3

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-5, the printed circuit board in 3D

    ТКП-1.36.A-5

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-2, the printed circuit board in 3D

    ТКП-1.36.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    93 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-2, the printed circuit board in 3D

    ТКП-1.21.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    82 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-1, the printed circuit board in 3D

    ТКП-1.21.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    81 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-2, the printed circuit board in 3D

    ТКП-1.17.C-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    76 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-1, the printed circuit board in 3D

    ТКП-1.17.C-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    75 parts10

Similar boards

  • 4 layers158 × 95 mmFHNW Pro4E FS19T8-3DPrinterBoard STM32, the printed circuit board in 3D

    FHNW Pro4E FS19T8-3DPrinterBoard STM32

    mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32

    Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

    264 parts17GPL-3.0
  • 4 layers50 × 80 mmARGOS DEMO, the printed circuit board in 3D

    ARGOS DEMO

    CNES/argos-demo-board

    Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.

    91 parts7CERN-OHL-S-2.0
  • 2 layers42 × 42 mmLoadcellSensor, the printed circuit board in 3D

    LoadcellSensor

    jujojujo2003/Ender-3-3DPrinter-Load-Cell-Bed-Leveling-Sensor

    This is a Load Cell based bed leveling sensor based on the RP2040 and TI ADS1235 ADC that should mount onto any vertical MGN12H gantry. My printer is an Ender 3 with a bunch of linear rail mods.

    56 parts5MIT
  • 4 layers40 × 52.5 mmVAL3000, the printed circuit board in 3D

    VAL3000

    Valar-Systems/valar-motion

    The easiest, fastest, cheapest, and safest way to spin a stepper motor wirelessly. Valar Motion is a family of tiny Wi-Fi stepper controllers built around a Trinamic TMC2209 driver — precisely control a motor's…

    61 parts3
  • 2 layers90 × 70 mmFumeXsense wx2, the printed circuit board in 3D

    FumeXsense wx2

    0xEBD/fumeXsense

    The idea behind fumeXsense is simple: understand what the Weller WX2 is doing via its serial interface and use that information to control the existing fume extractor automatically.

    39 parts2
  • 4 layers80 × 40 mmTuner time, the printed circuit board in 3D

    Tuner time

    SG295/ece477_guitartuner

    Automatic Guitar Tuner Project for ECE477 (Senior Design) @ Purdue University

    112 parts2
  • 4 layers97 × 105.5 mmSTARDRIVE SHIELD V1 0, the printed circuit board in 3D

    STARDRIVE SHIELD V1 0

    themarcolab/Stardrive-Shield

    With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.

    193 parts2
  • 4 layers40 × 52.5 mmVAL3100, the printed circuit board in 3D

    VAL3100

    Valar-Systems/VAL3100

    The VAL3100 is now part of the Valar Motion mono-repo, alongside the VAL3000 and VAL3101 controllers:

    67 parts2CERN-OHL-S-2.0

Questions

How big is the ТКП-1.25.B-1 PCB?

It measures 58.4 × 81.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.25.B-1 use?

46 parts, built around the B4B-XH-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.25.B-1 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.25.B/ТКП-1.25.B-1/ТКП-1.25.B-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.25.B-1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.