2 layers58.4 × 85.1 mm ТКП-1.17.B-2, the printed circuit board in 3D

ТКП-1.17.B-2

-ТТКРЧПДЛ-

Size: 58.4 × 85.1 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 67
Nets: 53
Pads: 167
Tracks, vias: 286, 0
Pours: 1
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Jun 2020
Updated: 19 Oct 2026

Overview

ТКП-1.17.B-2 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 85.1 mm with 67 parts on 53 nets, routed with 286 tracks and 0 vias.

It is built around the 78L05 and DC-005. Its parts include 24 capacitors, 22 resistors, 3 diodes and 3 crystals.

Main components

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

KCL
SBKCL

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Topics

stompboxes kicad

Project files

Show this board on your page

https://pcbkit.io/boards/Adept666/stompboxes/PCBS-PCAS/%D0%A2%D0%9A%D0%9F-3.17.B/%D0%A2%D0%9A%D0%9F-1.17.B-2/%D0%A2%D0%9A%D0%9F-1.17.B-2.kicad_pcb

The board's own page, for a message or a post.

Source

Repository: Adept666/stompboxes
Board file: PCBS-PCAS/ТКП-3.17.B/ТКП-1.17.B-2/ТКП-1.17.B-2.kicad_pcb
Commit: 9a9c1b3
Homepage: vk.com/stompboxes
Licence: Not stated

Parts

Qty	Value	Footprint	References
7	103	KCL-SM:R-SM-0805	R1, R4, R5, R10, R11, R13, R14
4	104	KCL-SM:C-SM-0805	C2, C5, C12, C13
3	105	KCL-SM:C-SM-1206	C15, C22, C23
3	476	KCL-TH-SL:CP-RADIAL-D05.0-P02.0-CLS	C3, C4, C6
3	B50K	SBKCL-TH-SL:RPB-18-1x17-1.5-PNL-7.2	RP1, RP2, RP3
3	X	KCL-TH-SL:CON-PAD-S-1.0-2.0	X1, X2, X3
2	102	KCL-SM:R-SM-1206	R19, R22
2	104	KCL-SM:C-SM-0603	C7, C8
2	203	KCL-SM:R-SM-1206	R12, R17
2	222	KCL-SM:C-SM-0805	C10, C11
2	223	KCL-SM:C-SM-1206	C9, C19
2	DI5M3x20	KCL-TH-SL:VMH-STA-DA5-PNL-3.0	VMH1, VMH2
2	PJ-644C	KCL-TH-SL:CON-PJ-644C	XS2, XS3
1	0	KCL-SM:R-SM-0805	R6
1	101	KCL-SM:C-SM-0805	C20
1	103	KCL-SM:C-SM-1206	C24
1	103	KCL-TH-SL:R-MFR-12	R15
1	104	KCL-TH-SL:R-MFR-12	R3
1	105	KCL-TH-SL:C-DISK-D04.2-T03.0-P05.08-d0.5	C17
1	105	KCL-TH-SL:R-MFR-12	R2
1	107	KCL-TH-SL:CP-RADIAL-D05.0-P02.0-CLS	C1
1	123	KCL-SM:R-SM-0805	R20
1	153	KCL-SM:C-SM-1206	C16
1	184	KCL-SM:R-SM-0805	R8
1	202	KCL-SM:R-SM-1206	R21
1	223	KCL-SM:R-SM-0805	R16
1	272	KCL-SM:R-SM-1206	R7
1	364	KCL-SM:R-SM-0805	R9
1	470	KCL-SM:C-SM-0805	C14
1	472	KCL-SM:C-SM-0805	C18
1	473	KCL-SM:C-SM-0805	C21
1	512	KCL-SM:R-SM-1206	R18
1	5532	KCL-SM:P-SO-08	D3
1	5817	KCL-TH-SL:P-DO-41	VD1
1	78L05	KCL-TH-SL:P-TO-92-OUT-GND-IN	D1
1	8970	KCL-SM:P-SO-16W	D2
1	BR-17.8	KCL-VIRTUAL:VLS-BR	VLS1
1	DC-005	KCL-TH-SL:CON-DC-005	XS1
1	FYL-5013UWC	KCL-TH-SL:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3	HL1
1	PBS-24-302SP	KCL-TH-SL:SW-PBS-24-302SP-3.0-PNL-12.0	SB1
1	X	KCL-VIRTUAL:B-PP3-HV	GB1
1	ТКП-6.3.1.A2.A1.A.1-1	SBEPL:ТКП-6.3.1.A2.A1.A	VE1
1	ТКП-6.3.3.A1.A1.3-1.A1.00	SBEPL:ТКП-6.3.3.A1	VE2

Similar boards

2 layers100 × 80 mm
PedalMeetingHeadphoneAmp RevD
kanengomibako/EffectsPedals

122 parts14Unlicense
4 layers87.3 × 56.7 mm
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT
2 layers149.9 × 55.9 mm
Pc amplifier
dilshan/arduino-mini-amp
Arduino based stereo audio amplifier system
140 parts67MIT
2 layers99.5 × 75.9 mm
Amp
hack-apollo/hack_amp
50W stereo power amplifier(TPA3116).
79 parts38GPL-3.0
4 layers76 × 100 mm
Chlorine revD
kanengomibako/Chlorine

206 parts11Unlicense
2 layers70 × 57 mm
VFD MQTT
Estylos/VFD-MQTT
Control of a VFD in MQTT with an ESP8266 and Discord.
42 parts2MIT
2 layers78.5 × 60.8 mm
Tachometer
PotatoX/Band_Saw_Conversion
Cheap benchtop wood cutting band saw -> decent metal cutting
64 parts1
2 layers30 × 50 mm
FAN PCB
alexgvg/FAN-PCB
Leiterkarte für FAN Stromverteilung
23 parts

Questions

How big is the ТКП-1.17.B-2 PCB?

It measures 58.4 × 85.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.17.B-2 use?

67 parts, built around the 78L05 and DC-005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.17.B-2 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.17.B/ТКП-1.17.B-2/ТКП-1.17.B-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.17.B-2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.

Overview

Main components

78L05

DC-005

README

-ТТКРЧПДЛ- / Тут короче педали

Big Muff [REV3]

Bass

Bass SM

NYC

NYC SM

Big Muff [REV2]

Bass

NYC

Crumbwave Multiplexer [REV1]

Deep Blue Delay [REV3]

[REV3C]

[C]

[C] SM

[REV3B]

[B]

[B] SM

Distortion + [REV2]

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

[A]

[A] SM

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Main Board [REV1C] / Potentiometer Board [REV1B]

Main Board [REV1B] / Potentiometer Board [REV1B]

Good Grief Overdrive [REV1]

[REV1B]

[B]

[B] SM

[REV1A]

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

[B] Down-Tuned

[B] Down-Tuned SM

[B] Standard-Tuned

[B] Standard-Tuned SM

[REV1A]

[A] Down-Tuned

[A] Standard-Tuned

Крыса [REV1]

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Авторы

Лицензии

Parts

More from Adept666/stompboxes

Similar boards

Questions

How big is the ТКП-1.17.B-2 PCB?

What parts does the ТКП-1.17.B-2 use?

Where can I download the ТКП-1.17.B-2 KiCad files?

Can I use the ТКП-1.17.B-2 design in my own project?