Skip to the content
2 layers250 × 30 mmLed meter, the printed circuit board in 3D

Burning Man Math Camp Synthesizers

Size
250 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
20
Pads
61
Tracks, vias
77, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
22 Aug 2022
Updated
29 Oct 2026

Overview

Led meter is an open-source printed circuit board by adeboni, from the adeboni/math-camp-synth repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 250 × 30 mm with 22 parts on 20 nets, routed with 77 tracks and 0 vias.

It is built around the 74HCT595D. Its parts include 8 capacitors, 6 resistors, 6 diodes, 1 IC and 1 connector.

Main components

1

README

README.md

Burning Man Math Camp Synths

2022: Pendulum

2023: Jukebox

Parts

22
QtyValueFootprintReferences
8C_PolarizedCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2, C3, C4, C5, C6, C7, C8
6120Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4, R5, R6
6LEDLED_THT:LED_D5.0mm_ClearD1, D2, D3, D4, D5, D6
174HCT595Package_DIP:DIP-16_W7.62mmU1
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_HorizontalJ1

More from adeboni/math-camp-synth

12
  • 2 layers280 × 65 mmLed mouth, the printed circuit board in 3D

    Led mouth

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    213 partsGPL-3.0
  • 2 layers280 × 65 mmLed mouth, the printed circuit board in 3D

    Led mouth

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    211 partsGPL-3.0
  • 2 layers100 × 100 mmJukebox light controller, the printed circuit board in 3D

    Jukebox light controller

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    179 partsGPL-3.0
  • 2 layers70.8 × 108 mmJukebox, the printed circuit board in 3D

    Jukebox

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    160 partsGPL-3.0
  • 2 layers60.6 × 108 mmJukebox io, the printed circuit board in 3D

    Jukebox io

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    153 partsGPL-3.0
  • 4 layers50.5 × 100 mmSynth, the printed circuit board in 3D

    Synth

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    114 partsGPL-3.0
  • 2 layers100 × 100 mmCanbus ui, the printed circuit board in 3D

    Canbus ui

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    106 partsGPL-3.0
  • 2 layers40.3 × 108 mmWand receiver, the printed circuit board in 3D

    Wand receiver

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    105 partsGPL-3.0
  • 2 layers40.3 × 100 mmTeensy, the printed circuit board in 3D

    Teensy

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    103 partsGPL-3.0
  • 4 layers68.6 × 53.3 mmEsp shield, the printed circuit board in 3D

    Esp shield

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    86 partsGPL-3.0
  • 2 layers100 × 100 mmTeensy, the printed circuit board in 3D

    Teensy

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    62 partsGPL-3.0
  • 2 layers30.1 × 18.3 mmMouth, the printed circuit board in 3D

    Mouth

    adeboni/math-camp-synth

    Burning Man Math Camp Synthesizers

    61 partsGPL-3.0

Similar boards

  • 2 layers92 × 94.5 mmPicoCNC, the printed circuit board in 3D

    PicoCNC

    phil-barrett/PicoCNC

    Raspberry Pi Pico based grblHAL Controller

    152 parts173
  • 2 layers116.8 × 73.7 mmDuPal V3, the printed circuit board in 3D

    DuPal V3

    DuPAL-PAL-DUmper/DuPAL_Board

    This repository contains the KiCad files and the gerber files for the DuPAL boards.

    133 parts57CC-BY-SA-4.0
  • 2 layers102 × 102 mmMRR ESPE, the printed circuit board in 3D

    MRR ESPE

    maplerainresearch/MRR_ESPE

    MRR ESPE 3D printer control board

    168 parts39
  • 2 layers209.1 × 126.6 mmTH XWhatsIt, the printed circuit board in 3D

    TH XWhatsIt

    listofoptions/TH-XWhatsIt

    through hole implementation of the capsense controllers by XWhatsIt

    60 parts21
  • 2 layers70 × 65 mmFluepdot, the printed circuit board in 3D

    Fluepdot

    Fluepke/Fluepdot

    Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe

    116 parts17AGPL-3.0
  • 2 layers199.4 × 50.8 mmNixie board, the printed circuit board in 3D

    Nixie board

    vascofazza/cloxie_nixie_clock

    Schematics and code for Cloxie: my Nixie Tube Clock.

    85 parts17GPL-3.0
  • 2 layers90.6 × 77.8 mmEmurom, the printed circuit board in 3D

    Emurom

    jtsiomb/emurom

    ROM emulator. Accepts ROM images through USB and acts as a parallel ROM chip.

    58 parts15CC-BY-SA-4.0
  • 2 layers94.9 × 94.7 mmGate, the printed circuit board in 3D

    Gate

    CountMurphy/DoorwayToHeaven

    A gate to other worlds

    141 parts13MIT

Questions

How big is the Led meter PCB?

It measures 250 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Led meter use?

22 parts, built around the 74HCT595D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led meter KiCad files?

From the adeboni/math-camp-synth repository on GitHub, at the commit this page was made from: the board is 2023-Jukebox/hardware/led_meter/led_meter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led meter design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).