
Combo laser driver
adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

This project is for a quadruple laser projection controller, aimed at supporting room-scale projections
4x laser controller is an open-source printed circuit board by adeboni, from the adeboni/laser-projector repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 70.8 × 100 mm with 144 parts on 213 nets, routed with 1,147 tracks and 106 vias.
It is built around the 74LS125DC, TEENSY 4.1 and L7805, with the SM4007 among its other parts. Its parts include 88 resistors, 21 capacitors, 13 ICs, 9 connectors and 6 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R10, R12, R21, R22, R25, R26, R36, R37, R40, R41, R49, R50, R54, R55 |
| 15 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19 |
| 12 | 100 | Resistor_SMD:R_0603_1608Metric | R7, R11, R15, R16, R29, R30, R33, R42, R51, R56, R59, R60 |
| 12 | 47k | Resistor_SMD:R_0603_1608Metric | R61, R63, R65, R67, R72, R74, R76, R79, R80, R82, R84, R87 |
| 10 | 100k | Resistor_SMD:R_0603_1608Metric | R62, R64, R66, R68, R70, R75, R77, R81, R83, R88 |
| 8 | 20k | Resistor_SMD:R_0603_1608Metric | R13, R14, R27, R28, R43, R44, R57, R58 |
| 8 | 3.3k | Resistor_SMD:R_0603_1608Metric | R8, R9, R23, R24, R38, R39, R52, R53 |
| 8 | 3.6k | Resistor_SMD:R_0603_1608Metric | R3, R4, R19, R20, R34, R35, R47, R48 |
| 8 | 9.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R17, R18, R31, R32, R45, R46 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | 68 | Resistor_SMD:R_0603_1608Metric | R69, R71, R73, R78 |
| 4 | LED | LED_THT:LED_D3.0mm | D3, D4, D5, D6 |
| 4 | MCP4922-EST | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U7, U10, U11, U12 |
| 4 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2, U4, U6, U8 |
| 3 | 74LS125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3, U5, U9 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R85, R86 |
| 2 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2, J6 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 2 | SM4007 | Diode_SMD:D_SOD-123 | D1, D2 |
| 1 | AUDIO_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J7 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | ILDA1 | Connector_Dsub:DSUB-25_Female_Vertical_P2.77x2.84mm_MountingHoles | J4 |
| 1 | ILDA2 | Connector_Dsub:DSUB-25_Female_Vertical_P2.77x2.84mm_MountingHoles | J5 |
| 1 | ILDA3 | Connector_Dsub:DSUB-25_Female_Vertical_P2.77x2.84mm_MountingHoles | J3 |
| 1 | ILDA4 | Connector_Dsub:DSUB-25_Female_Vertical_P2.77x2.84mm_MountingHoles | J1 |
| 1 | INTERLOCK1 | 4MS Switches:Switch_Toggle_SPDT_Mini_SolderLug | SW3 |
| 1 | INTERLOCK2 | 4MS Switches:Switch_Toggle_SPDT_Mini_SolderLug | SW4 |
| 1 | INTERLOCK3 | 4MS Switches:Switch_Toggle_SPDT_Mini_SolderLug | SW2 |
| 1 | INTERLOCK4 | 4MS Switches:Switch_Toggle_SPDT_Mini_SolderLug | SW1 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | MODE | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J9 |
| 1 | R_Potentiometer_US | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | Teensy4.1 | Alex Custom:Teensy41 | U13 |

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections




cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip


computerguy096/snark-barker-mini
A miniaturized version of the Snark Barker


alienware-sa/harness_tester_challenge
Harness Tester Challenge Leaderboard · comma.ai/jobs · Discord · X
It measures 70.8 × 100 mm and has 4 copper layers, 1.69 mm thick.
144 parts, built around the 74LS125DC, TEENSY 4.1, L7805 and SM4007. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the adeboni/laser-projector repository on GitHub, at the commit this page was made from: the board is 2023/hardware/4x_laser_controller/4x_laser_controller.kicad_pcb and its schematic 2023/hardware/15v_power/15v_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).