

SnarkBarker
A miniaturized version of the Snark Barker
- Size
- 103.7 × 78.5 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 180
- Nets
- 276
- Pads
- 898
- Tracks, vias
- 2,760, 250
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2026
- Updated
- 19 Aug 2026
Overview
SnarkBarker is an open-source printed circuit board by computerguy096, from the computerguy096/snark-barker-mini repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 4-layer board of 103.7 × 78.5 mm with 180 parts on 276 nets, routed with 2,760 tracks and 250 vias.
It is built around the 74LS245SC, 74LS125DC and LM324, with the DAC0808LCM, LM4880MX and 74LS74PC among its other parts. Its parts include 75 capacitors, 55 resistors, 33 ICs, 4 connectors and 2 diodes. It belongs with the 8051 (CH55x, STC, AT89) boards of this library.
Main components
1274LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS125DC
-0℃~+70℃ 1 10ns@5.5V,50pF 15mA 18mA 24mA 4 4.5V~5.5V 74LS Power-off isolation、Output enable Tri-State Unidirectional - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, TransceiversLM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierDAC0808LCM
SOIC-160℃~+75℃ 1 150ns 1LSB 2.3mA 4.5V~5.5V、4.5V~16.5V 8 Current buffering SOIC-16 Digital to Analog Converters (DAC) ROHSTexas InstrumentsDigital To Analog Converters (DACs)LM4880MX
SOIC-8-40℃~+85℃ 0.03% 2-Channel 2.7V~5.5V 3.6mA 325mWx2@8Ω 50dB Enable/shutdown function SOIC-8 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic Gates74LS374PC
PDIP-200ns 0℃~+70℃ 1 20ns 28ns@5V,45pF 35MHz 4.75V~5.25V 45mA 74LS Series 8 D-Type Rising Edge Tri-State PDIP-20 Flip FlopsonsemiFlip FlopsNE556
SOP-140℃~+70℃ 2 200mA 4.5V~16V 5mA SOP-14 555 Timers / Counters ROHSGRTimers / Counters74LS139PC
PDIP-1622ns 74LS 8mA Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, DecodersonsemiSignal Switches, Multiplexers, Decoders74LS14PC
PDIP-14InvertersTexas InstrumentsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdThe Snark Barker Mini - a miniaturized SB 1.0 Clone
The Snark Barker Mini is a function compatible clone of the original Snark Barker, made by schlae. It implements all the features of the original Sound Blaster:
- OPL2 FM synth
- digital sound playback and recording
- gameport with MIDI IN/OUT
- SAA1099 (Creative Music System) synth
The only major difference is the lack of a volume potentiometer. Due to the card's size and parts availability contraints, the volume is pre-set at max output, but this should not be a problem for speaker systems which have adjustable volume.

Bill Of Materials
An interactive HTML BOM is provided in /kicad/bom for easy parts installation. Most passives do not have silkscreen labels so this will be needed. Additionally, a CSV BOM is provided as well.
The Firmware
This card uses an Atmel 89LP51 as a modern day replacement for the original 80C51 microcontroller Creative used to implement the DSP chip. There is a programming header provided for the DSP chip, which can be flashed with this HEX file using the tool of your choice.
The DSP PWR jumper needs to be installed for normal operation, and removed when programming the DSP (it connects the DSP to VCC).
Testing and Diagnostics
The card can be tested using schlae's SBDIAG
Parts
180| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 100n | Capacitor_SMD:C_0805_2012Metric | C13, C14, C15, C19, C20, C21, C22, C41, C45, C49, C50, C51, C52, C53, C56, C59 +13 |
| 11 | 10uF | Capacitor_SMD:C_1210_3225Metric | C24, C36, C39, C42, C54, C55, C57, C58, C73, C74, C75 |
| 11 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R5, R6, R7, R8, R9, R10, R11, R12, R36, R37 |
| 6 | 4.7K | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R20, R48, R55 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric | R18, R19, R24, R25, R41 |
| 5 | 330p | Capacitor_SMD:C_0805_2012Metric | C3, C4, C37, C46, C48 |
| 4 | 10n | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11, C12 |
| 4 | 20K | Resistor_SMD:R_0805_2012Metric | R32, R33, R34, R35 |
| 4 | 2k | Resistor_SMD:R_0805_2012Metric | R13, R14, R15, R16 |
| 4 | 74LS74 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6, U23, U27, U28 |
| 3 | 1.5K | Resistor_SMD:R_0805_2012Metric | R22, R23, R50 |
| 3 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.2 | C32, C33, C43 |
| 3 | 1n | Capacitor_SMD:C_0805_2012Metric | C25, C26, C38 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C29, C30, C31 |
| 3 | 2.2n | Capacitor_SMD:C_0805_2012Metric | C27, C28, C47 |
| 3 | 22n | Capacitor_SMD:C_0805_2012Metric | C16, C17, C18 |
| 3 | 27K | Resistor_SMD:R_0805_2012Metric | R28, R29, R54 |
| 3 | 470K | Resistor_SMD:R_0805_2012Metric | R40, R47, R53 |
| 3 | 68K | Resistor_SMD:R_0805_2012Metric | R38, R39, R52 |
| 3 | 74LS08 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U16, U24, U26 |
| 3 | 74LS32 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5, U14, U25 |
| 2 | 100p | Capacitor_SMD:C_0805_2012Metric | C34, C35 |
| 2 | 15K | Resistor_SMD:R_0805_2012Metric | R30, R31 |
| 2 | 1N4148 | Diode_SMD:D_0805_2012Metric | D1, D2 |
| 2 | 270p | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | 2N3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 30p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 39K | Resistor_SMD:R_0805_2012Metric | R45, R51 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric | R42, R44 |
| 2 | 47K | Resistor_SMD:R_0805_2012Metric | R26, R27 |
| 2 | 47p | Capacitor_SMD:C_0805_2012Metric | C40, C44 |
| 2 | 74LS138 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U17, U18 |
| 2 | 74LS245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U19, U20 |
| 2 | 74LS374 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U8, U9 |
| 2 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U30, U31 |
| 2 | NE556 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U21, U22 |
| 2 | SAA1099 | Package_DIP:DIP-18_W7.62mm | U11, U12 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R46 |
| 1 | 12MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 2.2K | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 2.7K | Resistor_SMD:R_0805_2012Metric | R49 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R43 |
| 1 | 4.7n | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 47 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 470p | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 680p | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 74LS125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U7 |
| 1 | 74LS139 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U15 |
| 1 | 74LS14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U29 |
| 1 | 8-bit ISA slot | SB:ISA card edge | SL1 |
| 1 | AT89LP51 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U4 |
| 1 | DAC0808 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | DMA Enable | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | DSP PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | GAME | Connector_Dsub:DSUB-15_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | CN1 |
| 1 | Gameport enable | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | I/O ADDX | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | JP1 |
| 1 | IRQ | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | JP2 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
| 1 | L7905 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | LM393 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U32 |
| 1 | LM4880MX | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U33 |
| 1 | LOGO | SB:trw_logo | G1 |
| 1 | MIC | SB:TRS jack | CN3 |
| 1 | Prog | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | SPKOUT | SB:TRS jack | CN2 |
| 1 | YM3014 | Package_DIP:DIP-8_W7.62mm | U10 |
| 1 | YM3812 | Package_DIP:DIP-24_W15.24mm | U13 |
The 179 most common of 180 parts.
Similar boards
- 2 layers231.1 × 106.7 mm

- 2 layers379.1 × 273.4 mm

NE Delta
frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics
185 parts - 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers190.5 × 77 mm

- 4 layers295 × 285 mm
/GX700-PWB/Ksys573.kicad_pcb.jpg?size=s&soon)
Ksys573
NaokiS28/Konami-System-573-Documentation
Schematics and pinout information for the Konami System 573
126 parts16 - 2 layers301.5 × 367.3 mm

OSI 600D Superboard II Cherry Solder Mask
Bambelweeny57/OSI-600D-SuperBoard-II
KiCad 10 recreation of the Ohio Scientific Superboard II Model 600 rev D (1980) with Cherry MX keyswitches, 27C16/2816 ROMs, full schematic and assembly guide.
314 parts - 2 layers478 × 183 mm

- 2 layers

CompaqportableIII
raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.
123 parts17
Questions
How big is the SnarkBarker PCB?
It measures 103.7 × 78.5 mm and has 4 copper layers, 1.61 mm thick.
What parts does the SnarkBarker use?
180 parts, built around the 74LS245SC, 74LS125DC, LM324 and DAC0808LCM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SnarkBarker KiCad files?
From the computerguy096/snark-barker-mini repository on GitHub, at the commit this page was made from: the board is kicad/SnarkBarker.kicad_pcb and its schematic kicad/SnarkBarker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SnarkBarker design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).