

Pneumatic ctrl
All KiCad projects
- Size
- 60 × 86 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 34
- Pads
- 157
- Tracks, vias
- 242, 50
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Aug 2023
- Updated
- 14 Mar 2025
Overview
Pneumatic ctrl is an open-source printed circuit board by adarwoo, from the adarwoo/KiCad repository on GitHub. It is a 2-layer board of 60 × 86 mm with 61 parts on 34 nets, routed with 242 tracks and 50 vias.
It is built around the ATTINY3224-SSU, LM1117DT-5.0 and DMN6075S. Its parts include 16 resistors, 13 capacitors, 10 connectors, 6 diodes and 5 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY3224-SSU
SOIC-14-40℃~+85℃ 1.8V~5.5V 12 12bit 20MHz 256Byte 32KB 3KB 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM1117DT-5.0
TO-2520.003%Vout 0℃~+125℃@(Tj) 1 1.3V@(800mA) 10mA 15V 5V 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDMN6075S
SOT-23-55℃~+150℃ 1 N-channel 125mΩ@4.5V 19.5pF 247pF 350mW 3A 500mV 60V SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdKiCad
All KiCad projects
Adding all KiCad projects.
Currently, PCBs for the cnc (see Youtube guillaume.arreckx channel) are publised.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R6, R8, R11, R12, R16 |
| 7 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C11, C12 |
| 7 | Conn_01x03_Pin | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.81_1x03_P3.81mm_Vertical | J1, J2, J3, J4, J5, J6, J8 |
| 5 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R5, R7, R9, R10 |
| 5 | 4448 | Diode_SMD:D_SOD-323F | D1, D2, D3, D4, D5 |
| 5 | DMN6075S | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5, Q6 |
| 3 | 332 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R13, R15 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C9 |
| 2 | Conn_01x02_Pin | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J7, J9 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2 |
| 2 | ~ | Adarwoo:Murata_NFM61R | F1, F2 |
| 1 | +12V | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP1 |
| 1 | 100n | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C10 |
| 1 | 10u 50V | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C6 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C13 |
| 1 | 4u7 10V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | ATtiny3224-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | AVR-UPDI-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J10 |
| 1 | GND | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP3 |
| 1 | LED | LED_THT:LED_D3.0mm | D6 |
| 1 | LM1117DT-5.0 | Package_TO_SOT_SMD:SOT-223 | U4 |
| 1 | LOGO | LOGO | G*** |
| 1 | LT1785AxS8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Vcc | TestPoint:TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | TP2 |
More from adarwoo/KiCad
12- 4 layers103 × 107 mm

- 2 layers72 × 72 mm

- 2 layers66 × 107 mm

- 2 layers44 × 107 mm

- 2 layers60 × 107 mm

- 2 layers55 × 84.5 mm

- 2 layers36 × 72 mm

- 2 layers46 × 86 mm

- 2 layers69.3 × 87 mm

- 2 layers45 × 72 mm

- 2 layers36 × 72 mm

- 2 layers

Similar boards
- 2 layers68.6 × 53.3 mm

- 4 layers280 × 200 mm

Main Control Unit
Tuskar-Marine/hardware
All tools for the Mermaid's Rest open sailing tools
409 parts6 - 2 layers65 × 56 mm

- 4 layers123 × 56 mm

- 4 layers100 × 95 mm

PCK Controller
PecaJosef/PCK-CNC
PCK-CNC is an open-source CNC router designed to offer precision, reliability, and affordability. This machine combines high-performance features with an accessible design that caters to both beginners and CNC…
278 parts3GPL-3.0 - 4 layers69 × 46 mm

- 2 layers

- 4 layers40.5 × 100 mm

Questions
How big is the Pneumatic ctrl PCB?
It measures 60 × 86 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pneumatic ctrl use?
61 parts, built around the ATTINY3224-SSU, LM1117DT-5.0 and DMN6075S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pneumatic ctrl KiCad files?
From the adarwoo/KiCad repository on GitHub, at the commit this page was made from: the board is cnc/pneumatic_ctrl/pneumatic_ctrl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pneumatic ctrl design in my own project?
Its repository states no licence, so its author keeps all rights: ask adarwoo before reusing the design.