Skip to the content
2 layers101.1 × 68.6 mmPi1 PiHat, the printed circuit board in 3D
Size
101.1 × 68.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
112
Pads
208
Tracks, vias
533, 10
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
19 Dec 2023
Updated
19 Dec 2023

Overview

Pi1 PiHat is an open-source printed circuit board by adarshgovi, from the adarshgovi/InvertedPendulumPCBs repository on GitHub. It is a 2-layer board of 101.1 × 68.6 mm with 19 parts on 112 nets, routed with 533 tracks and 10 vias.

It is built around the PJ-002A.

Main components

1

Parts

19
QtyValueFootprintReferences
3Conn_01x05_PinConnector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_VerticalPi2, Pi3, Pi4
2BPchinabluepill:ChinaBluePillAS5600REC_BP1, MOTOR_BP1
2Conn_01x02_PinConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalLimitSwitch1, LimitSwitch2
2Conn_01x03_PinConnector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_VerticalAS5600JST1, BP_TO_MOTOR1
2Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalAS5600REC_BP_Display1, MOTOR_BP_DISPLAY1
2Conn_01x40_Pin20_pin_header_kicad:TE_7-146256-0J1, J2
2RC1206JR-074K7LRC1206JR-074K7L:RESC3116X65NSCL_Pull_Up1, SDA_Pull_Up1
1AS5600JST2Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalAS5600JST2
1Conn_01x04_PinConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalULTRASONIC1
1LOGOlogo.preety:systopia_logoG***
1PJ-002APJ-002A:CUI_PJ-002ABP_POWER1

More from adarshgovi/InvertedPendulumPCBs

1
  • 2 layers30.5 × 53.3 mmPi2 PiHat, the printed circuit board in 3D

    Pi2 PiHat

    adarshgovi/InvertedPendulumPCBs

    4 parts

Similar boards

  • 2 layers51.3 × 96.2 mmMinisynth32, the printed circuit board in 3D

    Minisynth32

    grantek/minisynth32

    A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.

    32 parts45CC-BY-SA-4.0
  • 6 layers228.6 × 110.7 mmDriver, the printed circuit board in 3D

    Driver

    thewonderidiot/lachesis

    Portable, safe readers for Apollo Guidance Computer core rope memory modules

    690 parts4MIT
  • 2 layers65 × 30.5 mmLed pi board, the printed circuit board in 3D

    Led pi board

    jrowe88/RPi-LED-RGBMatrix-Hat

    Hardware hat for Raspberry Pi to support RGB Matrix and LED strips

    32 parts2
  • 2 layers169 × 81 mmSG mesocosm pi interface, the printed circuit board in 3D

    SG mesocosm pi interface

    scott-whitworth/bancroft_temperature_control

    Supplementary material for Bancroft Experimental Temperature Control System

    77 parts2
  • 2 layers58.4 × 71.1 mmBreadboard psu, the printed circuit board in 3D

    Breadboard psu

    cegep-electronique-programmable/pcb_alimentation_prototypage

    Cette carte génére une tension de 3.3V ou 5V et se branche sur une plaquette de prototypage (breadboard).

    22 parts1
  • 4 layers70 × 100 mmNeural Edge, the printed circuit board in 3D

    Neural Edge

    rithylim/ESP32-P4-Neural-Edge-PCB

    140 parts1
  • 2 layers80 × 80 mmProjeto Final, the printed circuit board in 3D

    Projeto Final

    alighieribot/lpc11u14-board-bringup

    Board bring-up, hardware debugging & validation, and event-driven bare-metal firmware (ARM Cortex-M0 LPC11U14F) | UNIFEI PBLE02

    64 partsMIT
  • 2 layers53 × 30 mmBreadboard Power Supply, the printed circuit board in 3D

    Breadboard Power Supply

    DeepSpace00/Breadboard-Power-Supply

    Duel power supply for breadboard power rails

    28 partsCERN-OHL-P-2.0

Questions

How big is the Pi1 PiHat PCB?

It measures 101.1 × 68.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pi1 PiHat use?

19 parts, built around the PJ-002A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pi1 PiHat KiCad files?

From the adarshgovi/InvertedPendulumPCBs repository on GitHub, at the commit this page was made from: the board is Pi1_PiHat/Pi1_PiHat.kicad_pcb and its schematic Pi1_PiHat/Pi1_PiHat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pi1 PiHat design in my own project?

Its repository states no licence, so its author keeps all rights: ask adarshgovi before reusing the design.