
RobustEEG Base
ppolGTMonster/RobustEEG_forUHFMRI
Hardware for an Open Source EEG usable in high magnetic Fields

BeamBuddy is an open-source printed circuit board by adammhaile, from the adammhaile/BeamBuddy repository on GitHub, published under the MIT licence. It is a 2-layer board of 84.5 × 41.3 mm with 59 parts on 60 nets, routed with 628 tracks and 46 vias.
It is built around the CD4082BM96, MC7805CDTRKG and SN74AHCT14DR, with the PJ-202AH among its other parts. Its parts include 19 resistors, 13 diodes, 13 connectors, 9 capacitors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 560R | OPL_Resistor:R0603 | R4, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 6 | GRN | LED_SMD:LED_0805_2012Metric_Castellated | D2, D3, D4, D5, D6, D7 |
| 6 | RED | LED_SMD:LED_0805_2012Metric_Castellated | D8, D9, D10, D11, D12, D13 |
| 4 | 10k | OPL_Resistor:R0603 | R1, R2, R3, R5 |
| 3 | 10uF | OPL_Capacitor:C1206 | C1, C2, C6 |
| 2 | 100nF | OPL_Capacitor:C0805 | C7, C9 |
| 2 | 1uF | OPL_Capacitor:C0603 | C3, C8 |
| 2 | 22pF | OPL_Capacitor:C0603 | C4, C5 |
| 1 | 10K | OPL_Resistor:R0603 | R19 |
| 1 | 12V_TERM | OPL_Connector:H2-5.0-10.5X8.0MM | J4 |
| 1 | 16MHZ | OPL_Crystal_Oscillator:X2-SMD-5.0X3.2X1.3MM | Y1 |
| 1 | 4.7k | OPL_Resistor:R0603 | R6 |
| 1 | CD4082BM96 | CD4082BM96:CD4082BM96 | U3 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J13 |
| 1 | DOOR | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J1 |
| 1 | EXP1 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J9 |
| 1 | EXP2 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J10 |
| 1 | FLOW | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J12 |
| 1 | LASER_POT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J11 |
| 1 | LED_RED | LED_SMD:LED_0805_2012Metric_Castellated | D1 |
| 1 | LIM_MIN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J3 |
| 1 | MC7805CDTRKG | MC7805CDTRKG:MC7805CDTRKG | U1 |
| 1 | MCU-ATMEGA328P-AU_TQFP32_ | OPL_Integrated_Circuit:TQFP32-0.8-7X7MM | U4 |
| 1 | PJ-202AH | digikey-footprints:Barrel_Jack_5.5mmODx2.1mmID_PJ-202A | J5 |
| 1 | SN74AHCT14D | SN74AHCT14D:SN74AHCT14D | U2 |
| 1 | TEMP_DISABLE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | TEMP_SENSE | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J8 |
| 1 | WP_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J7 |

ppolGTMonster/RobustEEG_forUHFMRI
Hardware for an Open Source EEG usable in high magnetic Fields

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.



adammhaile/StepperChecker
StepperChecker is a stepper motor driver dev and test board, designed to be easy to build, setup, and use. It will take any stepstick style motor driver and any Feather compatible microcontroller board.

ikeefe12/tankervision-pdb
Four-layer KiCad power distribution board for the TankerVision robot: USB-C PD / barrel-jack input, supercapacitor-backed rail for clean Jetson shutdown, and four firmware-controlled protected output ports.

reelyactive/bledstripper-grove
Bluetooth Low Energy LED strip controller circuit board with standard Grove connectors. We believe in an open Internet of Things.

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
It measures 84.5 × 41.3 mm and has 2 copper layers, 1.6 mm thick.
59 parts, built around the CD4082BM96, MC7805CDTRKG, SN74AHCT14DR and PJ-202AH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the adammhaile/BeamBuddy repository on GitHub, at the commit this page was made from: the board is BeamBuddy/BeamBuddy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).