adamatom/chewtoyThis is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins
Temp probe is an open-source printed circuit board by adamatom, from the adamatom/chewtoy repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 28.1 × 14.1 mm with 18 parts on 13 nets, routed with 112 tracks and 16 vias.
Its parts include 11 resistors, 2 capacitors, 2 connectors, 1 IC and 1 diode. It belongs with the sensors and measurement boards of this library.
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0 | Resistors_SMD:R_0805 | R1, R2, R6, R8 |
| 2 | 1.8K | Resistors_SMD:R_0805 | R9, R10 |
| 2 | 100K | Resistors_SMD:R_0805 | R3, R4 |
| 2 | NP | Resistors_SMD:R_0805 | R5, R7 |
| 1 | 100nF | Capacitors_SMD:C_0805 | C2 |
| 1 | 220 | Resistors_SMD:R_0805 | R11 |
| 1 | CONN_01X03 | Socket_Strips:Socket_Strip_Angled_1x03 | P1 |
| 1 | CONN_02X03 | Socket_Strips:Socket_Strip_Angled_2x03 | P2 |
| 1 | LED | LEDs:LED-0805 | D1 |
| 1 | LOGO | logos:atom | G*** |
| 1 | NP | Capacitors_SMD:C_0805 | C1 |
| 1 | TMP435 | Housings_SSOP:MSOP-10-1EP_3x3mm_Pitch0.5mm | U1 |
It measures 28.1 × 14.1 mm and has 2 copper layers, 1.6 mm thick.
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the adamatom/chewtoy repository on GitHub, at the commit this page was made from: the board is temp_probe/temp_probe.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
adamatom/chewtoy
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins
adamatom/chewtoy
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS