
Chewtoy
adamatom/chewtoy
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins
.kicad_pcb.jpg)
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins
Temp probe (copy) is an open-source printed circuit board by adamatom, from the adamatom/chewtoy repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 36.1 × 23.6 mm with 16 parts on 15 nets, routed with 79 tracks and 2 vias.
It is built around the TPS73233DBV. Its parts include 8 resistors, 3 capacitors, 2 ICs, 2 connectors and 1 diode. It belongs with the sensors and measurement boards of this library.
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100K | Resistors_SMD:R_0805 | R101, R102, R105 |
| 2 | 0 | Resistors_SMD:R_0805 | R107, R108 |
| 2 | 1.8K | Resistors_SMD:R_0805 | R103, R104 |
| 1 | 100nF | Capacitors_SMD:C_0805 | C101 |
| 1 | 220 | Resistors_SMD:R_0805 | R106 |
| 1 | 4.7uF | Capacitors_SMD:C_0805 | C102 |
| 1 | CONN_01X03 | Socket_Strips:Socket_Strip_Straight_1x03 | P101 |
| 1 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05 | P102 |
| 1 | LED | LEDs:LED-0805 | D101 |
| 1 | NP | Capacitors_SMD:C_0805 | C103 |
| 1 | TMP435 | Housings_SSOP:MSOP-10-1EP_3x3mm_Pitch0.5mm | U101 |
| 1 | TPS73233 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U102 |

adamatom/chewtoy
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

adamatom/chewtoy
This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins



google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 36.1 × 23.6 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the TPS73233DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the adamatom/chewtoy repository on GitHub, at the commit this page was made from: the board is temp_probe/temp_probe (copy).kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).