2 layers180 × 100 mm
Input Board
acwright/Sherline-CNC-Conversion
Project files for my Sherline Lathe and Mill CNC conversion
41 parts1MIT
2 layers215 × 90 mm
Motor Board
acwright/Sherline-CNC-Conversion1Project files for my Sherline Lathe and Mill CNC conversion
- Size
- 215 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 57
- Pads
- 145
- Tracks, vias
- 232, 64
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Nov 2021
- Updated
- 11 Feb 2022
Overview
Motor Board is an open-source printed circuit board by acwright, from the acwright/Sherline-CNC-Conversion repository on GitHub, published under the MIT licence. It is a 2-layer board of 215 × 90 mm with 46 parts on 57 nets, routed with 232 tracks and 64 vias.
It is built around the SRD-12VDC-SL-C. Its parts include 12 resistors, 9 connectors, 5 diodes, 5 transistors and 5 switches. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdSherline CNC Conversion
Project files for my Sherline Lathe and Mill CNC Conversion
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7 |
| 5 | 1K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R8, R9, R10, R11, R12 |
| 5 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5 |
| 5 | 2N2222 | Package_TO_SOT_THT:TO-92L_HandSolder | Q1, Q2, Q3, Q4, Q5 |
| 5 | SRD-12VDC-SL-C | SRD-05VDC-SL-C:SRD-05VDC-SL-C | K1, K2, K3, K4, K5 |
| 4 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R6 |
| 2 | 4.7K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R5 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R7 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Auto / Fwd / Rev | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J5 |
| 1 | Direction LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Indicator LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Input Board | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J1 |
| 1 | KBLC-240D | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | J8 |
| 1 | KBSI-240D | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-5-5.0-H_1x05_P5.00mm_Horizontal | J9 |
| 1 | LOGO | A.C. Wright Logo:A.C. Wright Logo 10mm | G*** |
| 1 | Motor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J7 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J3 |
| 1 | Speed | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J2 |
The 45 most common of 46 parts.
More from acwright/Sherline-CNC-Conversion
1Similar boards
- 2 layers92 × 72.2 mm
- 4 layers144.2 × 82.8 mm
SmartFuseBox
k3ldar/PowerControlHub
PowerControlHub is a flexible automation controller for 12V systems. It combines relay switching, sensor monitoring, and smart‑home connectivity (MQTT, Home Assistant, REST, BLE) into one device.
93 parts5GPL-3.0 - 2 layers100 × 74 mm
Qym solder
basson/qym-solder
QymSolder - Soldering station three in one - hakko t12, hot air gun, d909/898D or analog.
135 parts4GPL-3.0 - 4 layers83 × 67.5 mm
MarineBoard
Cadburies/SisuAssistant
Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.
162 parts1Apache-2.0 - 2 layers
- 2 layers100 × 50 mm
Moba block stelle
hpbock/moba-bockstelle
Ein Blockstellenmodul für analoge Modellbahnen zur Ansteuerung von Lichtsignalen, Zugbeeinflussung und Belegtmeldung für Loconet-T.
88 parts1 - 4 layers188 × 90.2 mm
- 2 layers118.9 × 56.6 mm
Gas tank temp reg PCB
aesirkth/Mimisbrunnr_gas_temp_ctrl
Mímisbrunnr gas tank temperature control unit
54 parts
Questions
How big is the Motor Board PCB?
It measures 215 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motor Board use?
46 parts, built around the SRD-12VDC-SL-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor Board KiCad files?
From the acwright/Sherline-CNC-Conversion repository on GitHub, at the commit this page was made from: the board is Hardware/Motor Board/Motor Board.kicad_pcb and its schematic Hardware/Input Board/Input Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor Board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).