

Audio interrupter
DRSSTC audio interrupter
- Size
- 39.4 × 48.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 26
- Pads
- 93
- Tracks, vias
- 176, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Jan 2020
- Updated
- 19 Jan 2020
Overview
Audio interrupter is an open-source printed circuit board by acobaugh, from the acobaugh/drsstc-audio-interrupter repository on GitHub. It is a 2-layer board of 39.4 × 48.9 mm with 41 parts on 26 nets, routed with 176 tracks and 16 vias.
It is built around the LM321, L7805 and BC847, with the 1N4148W among its other parts. Its parts include 13 resistors, 9 capacitors, 6 connectors, 4 transistors and 3 ICs. It belongs with the audio and music boards of this library.
Main components
4LM321
SOT-23-50℃~+70℃ 1 2mV 3nA 400V/ms 40mA 430uA 45nA 90dB SOT-23-5 Operational Amplifier ROHSPJSEMIOperational AmplifierL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R7, R9, R11 |
| 4 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4, C6 |
| 2 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C5 |
| 2 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R12 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 1 | .22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 100 | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C8 |
| 1 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 1 | 9V | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | BT1 |
| 1 | AUDIO IN | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J1 |
| 1 | FIBER TX | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J5 |
| 1 | L7805 | lm7805smd:LM7805MPX&slash_NOPB | U1 |
| 1 | LM321 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LM555CM_NOPB | lm555cm:LM555CM&slash_NOPB | U3 |
| 1 | PW | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J4 |
| 1 | PWR LED | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J6 |
| 1 | SENSITIVITY | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J3 |
| 1 | SIGNAL LED | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | J2 |
Similar boards
- 2 layers116.8 × 92.2 mm

- 2 layers70 × 100 mm

Korg ms x
jostsalathe/korg_ms-x
An extreme MONOTRON mod by Soul Machine in form of an SMD PCB
211 parts2 - 2 layers80 × 80 mm

Digital tone
barrybridges68/assorted_audio_projects
Assorted audio projects, most in working state
102 partsGPL-3.0 - 2 layers

- 4 layers60 × 106.5 mm

- 2 layers122.1 × 128.5 mm

ATS-20
Fihdi/ATS-20-Eurorack
A clone of the ATS 20 from PU2CLR in Eurorack Format (3U height). The circuit contains jumpers to switch between standalone mode and Eurorack.
81 parts2 - 2 layers143.8 × 99.6 mm

- 2 layers

ATMEGA 32 2
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
54 partsMIT
Questions
How big is the Audio interrupter PCB?
It measures 39.4 × 48.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Audio interrupter use?
41 parts, built around the LM321, L7805, BC847 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Audio interrupter KiCad files?
From the acobaugh/drsstc-audio-interrupter repository on GitHub, at the commit this page was made from: the board is audio-interrupter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Audio interrupter design in my own project?
Its repository states no licence, so its author keeps all rights: ask acobaugh before reusing the design.