2 layers48.3 × 83.8 mm
Smartswitch
mlauke/smartswitch
sonnen battery controller based on ESP8266/ESP32 to drive a 3.3kW heater (Heißwasserspeicher-Einbauheizung) and integrates with the local hot water system.
35 parts1MIT
2 layers
Ev driver
aceleste/ev-driver- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 11
- Pads
- 30
- Tracks, vias
- 54, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Dec 2014
- Updated
- 2 Dec 2014
Overview
Ev driver is an open-source printed circuit board by aceleste, from the aceleste/ev-driver repository on GitHub. It is a 2-layer board with 12 parts on 11 nets, routed with 54 tracks and 0 vias.
It is built around the MOC3042M and BC237. Its parts include 5 resistors, 2 diodes, 2 transistors, 1 capacitor and 1 IC.
Main components
2
MOC3042M
DIP-6-40℃~+85℃ 1 1.5V 1000V/us 1A 250mW 4.17kV 400V 6 60mA TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
BC237
TO-92-55℃~+150℃ 1 NPN 150MHz 15nA 350mW 45V 5A 6V 800mV 90 NPN TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 47R | Discret:R3 | R2_%X%1, R5_%X%1 |
| 1 | 0.1uF | alain:C_Radial_15mm | C1_%X%1 |
| 1 | 1N4002 | Discret:D3 | D1_%X%1 |
| 1 | 240R | Discret:R3 | R1_%X%1 |
| 1 | 330R | Discret:R3 | R4_%X%1 |
| 1 | 360R | Discret:R3 | R3_%X%1 |
| 1 | BC237 | Discret:TO92-EBC | Q1_%X%1 |
| 1 | CONN_01X02 | alain:Bornier_1x02_5.08mm | P1_%X%1 |
| 1 | LED | alain:LED_ThroughHole_SideView | D2_%X%1 |
| 1 | MOC3042M | Sockets_DIP:DIP-6__300 | IC1_%X%1 |
| 1 | TRIAC_BTA2 | alain:TO-227-Socket | Q2_%X%1 |
Questions
What parts does the Ev driver use?
12 parts, built around the MOC3042M and BC237. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ev driver KiCad files?
From the aceleste/ev-driver repository on GitHub, at the commit this page was made from: the board is ev-driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ev driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask aceleste before reusing the design.
Similar boards
- 2 layers70.2 × 33 mm
- 2 layers
- 2 layers160 × 74.9 mm
- 2 layers100.1 × 100.5 mm
SDR Reciever
greenjacketgirl/SDR_Receiver
This project is an attempt at designing and building a Software Defined Radio receiver that has the capabilities of listening to frequencies ranging from 500kHz to 50MHz utlizing the board designed, a sound card, and…
176 parts8 - 2 layers50.8 × 74.9 mm
- 2 layers47 × 81.5 mm
- 2 layers70 × 30 mm
