2 layers139.9 × 61.1 mm
2 layers134.6 × 58.4 mm
Team tap
abzman/atari-jaguar-PCBs3- Size
- 134.6 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 70
- Pads
- 195
- Tracks, vias
- 786, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Feb 2022
- Updated
- 8 Feb 2026
Overview
Team tap is an open-source printed circuit board by abzman, from the abzman/atari-jaguar-PCBs repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 134.6 × 58.4 mm with 44 parts on 70 nets, routed with 786 tracks and 40 vias.
It is built around the 74HC244D and 74HC154D. Its parts include 25 diodes, 7 resistors, 3 capacitors, 2 ICs and 1 connector.
Main components
2README
README.mdatari-jaguar-PCBs
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 6 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6 |
| 4 | controller port | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm | SCK1, SCK2, SCK3, SCK4 |
| 2 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R7 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 74HC154 | Package_DIP:DIP-24_W15.24mm | U1 |
| 1 | 74HC244 | Package_DIP:DIP-20_W7.62mm | U2 |
| 1 | LOGO | Evan's misc parts:Evan Logo | G*** |
| 1 | LOGO | Evan's misc parts:OSHW gear | G*** |
| 1 | to console cable | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | P1 |
More from abzman/atari-jaguar-PCBs
5- 2 layers140 × 55 mm
- 2 layers121.1 × 45.7 mm
- 2 layers116.4 × 48.9 mm
- 2 layers121.1 × 45.7 mm
Similar boards
- 2 layers200 × 150 mm
- 4 layers16.5 × 10.9 mm
- 2 layers440.7 × 139.7 mm
Sentinel 65X Keyboard - V01
studio8502/Sentinel-65X
A cost-reduced 65816-compatible retrocomputer
217 parts29CERN-OHL-P-2.0 - 2 layers32 × 18 mm
- 6 layers210 × 119 mm
Claculator Keypad
Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.
202 parts5 - 2 layers144.8 × 204.5 mm
- 4 layers304.5 × 217.2 mm
Latest Full Backplane
Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips
478 parts2 - 4 layers220 × 200 mm
Quadrant
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
347 parts
Questions
How big is the Team tap PCB?
It measures 134.6 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Team tap use?
44 parts, built around the 74HC244D and 74HC154D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Team tap KiCad files?
From the abzman/atari-jaguar-PCBs repository on GitHub, at the commit this page was made from: the board is team tap/team tap.kicad_pcb and its schematic jaguar controller lower pcb/jaguar controller lower pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Team tap design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).