Skip to the content
4 layers18.5 × 35 mmEZCPAP, the printed circuit board in 3D

CPAP BLDC controller on a EZDriver

Size
18.5 × 35 mm
Copper layers
4
Thickness
1.6 mm
Parts
56
Nets
87
Pads
328
Tracks, vias
401, 58
Pours
42
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Aug 2025
Updated
4 Dec 2025

Overview

EZCPAP is an open-source printed circuit board by abitmeh, from the abitmeh/EZDCHardware repository on GitHub. It is a 4-layer board of 18.5 × 35 mm with 56 parts on 87 nets, routed with 401 tracks and 58 vias.

It is built around the ESP32-S3FH4R2, TPS54202DDC and AP2112K-3.3, with the FXMA108BQX among its other parts. Its parts include 21 capacitors, 13 resistors, 5 ICs, 2 connectors and 1 diode. It belongs with the robots and motor control boards and the ESP32 boards of this library.

Main components

4

README

README.md

EZCPAP

EZCPAP is a BLDC driver for CPAP blower motors that fits in a BTT EZDriver socket, such as on an SKR EZ.

It effectively acts like a motor driver on a 3d printer. which you can then use to drive a CPAP motor for part cooling.

!! Still in the conceptual/development phase !!

View in kicanvas

Concept render

EZPCAP with heatsink EZCPAP

CPAP Motor

Parts

56
QtyValueFootprintReferences
5100nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC9, C11, C12, C13, C15
410kΩResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR3, R4, R9, R13
447pFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC14, C20, C21, C22
3160kΩResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR2, R8, R10
210µFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4, C16
218pFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC7, C8
21µFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC5, C19
233ΩResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR6, R7
2NaNCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC17, C18
1+EZCPAP:TestLoop_RCUCTE _0603TP2
1-EZCPAP:TestLoop_RCUCTE _0603TP1
1100kΩResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR11
1100nFCapacitor_SMD:C_0402_1005MetricC2
1100nF (1µF)Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC6
110nFCapacitor_SMD:C_0402_1005MetricC1
118.7kΩResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR12
133mΩResistor_SMD:R_0805_2012MetricR1
1470nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC3
16.8µHLocal_Inductor_SMD_Wurth:L_Wurth_WE-MAPI-3020L1
164.9Resistor_SMD:R_0402_1005MetricR14
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U4
1BEMF_UEZCPAP:TestLoop_RCUCTE _0603TP5
1BEMF_VEZCPAP:TestLoop_RCUCTE _0603TP6
1BEMF_WEZCPAP:TestLoop_RCUCTE _0603TP7
1CFPX-218Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY1
1DRV8313RHHREZCPAP:DRV8313RHHU1
1EN1EZCPAP:TestLoop_RCUCTE _0603TP9
1ESP32-S3FH4R2Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm_ThermalViasU2
1EZEZCPAP:EZDriverJ1
1FH33-12S-0.5SH10Connectors:CONN_FH33-12S-0.5SH10_HIRJ6
1FXMA108Package_DFN_QFN:WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mmU5
1IN1EZCPAP:TestLoop_RCUCTE _0603TP10
1LOGOEZCPAP:EZDC LogoG***
1MountingHoleEZCPAP:HoleH5
1NFAULTEZCPAP:TestLoop_RCUCTE _0603TP4
1NSLEEPEZCPAP:TestLoop_RCUCTE _0603TP3
1RSENSEEZCPAP:TestLoop_RCUCTE _0603TP8
1TPS54202DDCPackage_TO_SOT_SMD:SOT-23-6U3
1WL-SFCD_0805EZCPAP:WL-SFCD_0805D1

Similar boards

  • 2 layers42 × 32 mmRAMS - PCB, the printed circuit board in 3D

    RAMS - PCB

    JanClyde05/Road-Accident-Monitoring-System

    This directory contains the planning, specification, and initial KiCad project for RAMS Wearable PCB Revision C. Do not fabricate from this directory yet -- manual schematic wiring and DRC verification are still needed.

    68 parts1
  • 4 layers18 × 51.3 mmATesp32, the printed circuit board in 3D

    ATesp32

    SreeniEadara/ATesp32

    esp32s3 board that has an identical footprint and similar pinout to the ATmega32.

    51 parts
  • 2 layers39 × 40 mmMdb bridge esp32s3, the printed circuit board in 3D

    Mdb bridge esp32s3

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    53 parts190MIT
  • 4 layers54 × 85.7 mmWireless, the printed circuit board in 3D

    Wireless

    tongtongwang86/Revolute

    NRF52833 Based ScrollWheel Key

    271 parts5
  • 4 layers93.2 × 35 mmMk2 routed, the printed circuit board in 3D

    Mk2 routed

    Woz4tetra/auto-battlebot

    This project brings aim-assist and autonomous control to combat robots.

    75 parts3
  • 2 layers100 × 100 mmEnvcity aqm v2, the printed circuit board in 3D

    Envcity aqm v2

    MateusMaruzka/aqm_envcity_hw

    138 parts2

Questions

How big is the EZCPAP PCB?

It measures 18.5 × 35 mm and has 4 copper layers, 1.6 mm thick.

What parts does the EZCPAP use?

56 parts, built around the ESP32-S3FH4R2, TPS54202DDC, AP2112K-3.3 and FXMA108BQX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EZCPAP KiCad files?

From the abitmeh/EZDCHardware repository on GitHub, at the commit this page was made from: the board is EZCPAP.kicad_pcb and its schematic EZCPAP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EZCPAP design in my own project?

Its repository states no licence, so its author keeps all rights: ask abitmeh before reusing the design.