Skip to the content
4 layers9.5 × 17.2 mmNovara Sensor, the printed circuit board in 3D

The HARDWARE design for the product - Intelligent maternal health monitoring using PPG for early detection of stress and pregnancy-related risks.

Size
9.5 × 17.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
15
Nets
19
Pads
69
Tracks, vias
213, 18
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Aug 2026
Updated
25 Aug 2026

Overview

Novara Sensor is an open-source printed circuit board by abhisheknote1234-writ, from the abhisheknote1234-writ/Novara_PCB_Design repository on GitHub. It is a 4-layer board of 9.5 × 17.2 mm with 15 parts on 19 nets, routed with 213 tracks and 18 vias.

It is built around the MAX30101EFD+T and BMA400. Its parts include 7 capacitors, 4 resistors, 3 ICs and 1 connector. It belongs with the sensors and measurement boards of this library.

Main components

2

README

README.md

Novara — Wearable Embedded Hardware Prototype

Novara is a wearable embedded-hardware prototype designed around a distributed PCB architecture: a rigid main controller/power board, a long flexible interconnect, and a dedicated sensor board.

Project Architecture

text
┌─────────────────────┐
│     MAIN PCB        │
│                     │
│ nRF52833            │
│ Power / USB / SWD   │
│ BLE RF              │
└──────────┬──────────┘
           │
       10-pin FPC
           │
           ▼
┌─────────────────────┐
│     FLEX PCB        │
│                     │
│ ~160 mm flexible    │
│ interconnect        │
└──────────┬──────────┘
           │
       10-pin FPC
           │
           ▼
┌─────────────────────┐
│    SENSOR PCB       │
│                     │

Main PCB

The main board is the central embedded platform and contains:

  • nRF52833 BLE microcontroller
  • USB-C interface
  • Li-Po battery charging/power circuitry
  • 3.3 V and 1.8 V power rails
  • SWD/debug interface
  • RF matching and antenna section
  • Main-board user/control interfaces
  • 10-pin interface to the flexible interconnect

Flex PCB

The flex board provides the electrical and mechanical interconnect between the wrist/main electronics and the sensor board.

  • 2-layer polyimide-based flex design
  • Approximately 160 mm long flexible section
  • 10-conductor interface
  • I²C and sensor interrupt signals
  • 3.3 V and 1.8 V power rails
  • Multiple ground conductors
  • Custom FPC contact termination footprint

Flex Interface

PinNet
1GND
2+3V3
3GND
4I2C_SDA
5I2C_SCL
6+1V8
7BMA400_INT
8MAX30101_INT
9GND
10GND / spare

Sensor PCB

The sensor board contains the wearable sensing elements and their local support circuitry:

  • MAX30101 optical sensor for PPG/heart-rate related sensing
  • TMP117 digital temperature sensor
  • BMA400 accelerometer
  • Local sensor decoupling and I²C support circuitry
  • 10-pin FPC interface to the main/flex assembly

Design Tools

  • KiCad
  • PCB designed as separate Main, Flex, and Sensor projects

Repository Structure

text
Novara_PCB_Design/
├── Novara_Main/
│   ├── Novara_main.kicad_pro
│   ├── Novara_main.kicad_sch
│   ├── Novara_main.kicad_pcb
│   └── custom libraries / component files
│
├── Novara_Sensor/
│   ├── Novara_Sensor.kicad_pro
│   ├── Novara_Sensor.kicad_sch
│   ├── Novara_Sensor.kicad_pcb
│   └── custom libraries / component files
│
└── Novara_SensorFlex/
    ├── Novara_Flex.kicad_pro
    ├── Novara_Flex.kicad_sch
    ├── Novara_Flex.kicad_pcb
    └── Library.pretty/

Verification

The three KiCad designs were checked with ERC/DRC during development. The final submission should be treated as a prototype hardware design rather than a production-qualified medical device.

Individual Contribution

This repository contains the PCB design work for the Novara hardware prototype, including:

  • Hardware architecture
  • Schematic design
  • Component and interface selection
  • Power architecture
  • MCU/RF section design
  • PCB layout
  • Flexible PCB interconnect design
  • Sensor-board integration

Status

Prototype / engineering design — ready for technical review.

The design is intended for evaluation and further hardware validation, including fabrication, assembly, electrical bring-up, RF validation, and sensor testing.

Parts

15
QtyValueFootprintReferences
44.7k ohmResistor_SMD:R_0402_1005MetricR12, R13, R16, R17
3100 nfCapacitor_SMD:C_0402_1005MetricC1, C12, C13
2100nfCapacitor_SMD:C_0402_1005MetricC5, C9
110ufCapacitor_SMD:C_0402_1005MetricC10
14.7 ufCapacitor_SMD:C_0402_1005MetricC7
1BMA400BMA400:XDCR_BMA400U5
1Conn_01x10_PinConnector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_HorizontalJ1
1MAX30101EFD+Tfootprints:21-1048F_F143A5&plus_1_MXMU3
1TMP117xxDRVPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU4

More from abhisheknote1234-writ/Novara_PCB_Design

2
  • 4 layers49.3 × 53.8 mmNovara main, the printed circuit board in 3D

    Novara main

    abhisheknote1234-writ/Novara_PCB_Design

    The HARDWARE design for the product - Intelligent maternal health monitoring using PPG for early detection of stress and pregnancy-related risks.

    52 parts
  • 2 layers139.5 × 5.9 mmNovara Flex, the printed circuit board in 3D

    Novara Flex

    abhisheknote1234-writ/Novara_PCB_Design

    The HARDWARE design for the product - Intelligent maternal health monitoring using PPG for early detection of stress and pregnancy-related risks.

    2 parts

Similar boards

  • 4 layers44.5 × 50.6 mmKompic Mk1b, the printed circuit board in 3D

    Kompic Mk1b

    porupski/kompic-wearable

    Compact Open Multi-sensor Platform & Apparat.

    149 parts3GPL-3.0
  • 2 layers28 × 18 mmFinal project, the printed circuit board in 3D

    Final project

    Casasaviruz/Wearable-biosensor-PCB

    A battery powered double sided PCB sensor meant to monitor the heart rate, breathing, temperature and sleep and active cycles of lab mice, made as small and non invasive as possible, data is transmitted through Bluetooth

    37 parts
  • 4 layers20 × 25 mmWhoop, the printed circuit board in 3D

    Whoop

    epicgamer720/Smart-Watch-Board

    A PCB for a smart watch

    57 parts
  • 4 layers26 × 45 mmSchematic design, the printed circuit board in 3D

    Schematic design

    NicholasMcSweenManickchand/Wearable-device

    Creation of a custom wearable device. Custom pcb and all

    67 parts
  • 4 layers24.2 × 30.9 mmWearable, the printed circuit board in 3D

    Wearable

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    97 parts4

Questions

How big is the Novara Sensor PCB?

It measures 9.5 × 17.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Novara Sensor use?

15 parts, built around the MAX30101EFD+T and BMA400. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Novara Sensor KiCad files?

From the abhisheknote1234-writ/Novara_PCB_Design repository on GitHub, at the commit this page was made from: the board is Novara_Sensor/Novara_Sensor.kicad_pcb and its schematic Novara_Main/Novara_main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Novara Sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask abhisheknote1234-writ before reusing the design.