
The guesser
Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.

Creation of a custom wearable device. Custom pcb and all
Schematic design is an open-source printed circuit board by NicholasMcSweenManickchand, from the NicholasMcSweenManickchand/Wearable-device repository on GitHub. It is a 4-layer board of 26 × 45 mm with 67 parts on 86 nets, routed with 591 tracks and 113 vias.
It is built around the MDBT50Q-1MV2, LIS2MDL and MAX30101EFD+T, with the TPD4S014DSQR, MPU-6500 and RC0402FR-0710KL among its other parts. Its parts include 37 capacitors, 15 resistors, 9 ICs, 3 connectors and 1 inductor. It belongs with the wearables boards and the nRF52 and nRF5x boards of this library.
The goal of this project is to create a custom wearable that can gather data and interpret from that data the hear rate, step count, etc. I want it to do this locally on the micro controller (edge computing). This project will broadcast this data (via Bluetooth) into an app or a UX of some kind to make the data easily readable for users.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0.1uF 16V | Capacitor_SMD:C_0402_1005Metric | C3, C10, C12, C14, C17, C18, C23, C24, C25, C26, C30, C33, C34, C35, C37, C39 +2 |
| 7 | 10uF 16V | Capacitor_SMD:C_0603_1608Metric | C9, C11, C20, C27, C28, C31, C40 |
| 4 | 10K 1% | Resistor_SMD:R_0402_1005Metric | R6, R10, R12, R17 |
| 4 | 1uF 16V | Capacitor_SMD:C_0603_1608Metric | C13, C15, C36, C38 |
| 4 | 4.7uF 16V | Capacitor_SMD:C_0603_1608Metric | C1, C8, C16, C19 |
| 2 | 12pF 50V C0G | Capacitor_SMD:C_0402_1005Metric | C22, C29 |
| 2 | 1k 1% | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 200K 1% | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | 4.7K 1% | Resistor_SMD:R_0402_1005Metric | R11, R13 |
| 2 | 5.11K 1% | Resistor_SMD:R_0402_1005Metric | R14, R18 |
| 1 | 10nF 50V | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 220nF 16V | Capacitor_SMD:C_0402_1005Metric | C32 |
| 1 | 3.48K 1% | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 4.7k 1% | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 90.9K 1% | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | FC-135R 32.7680KA-AC3 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | LIS2MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U7 |
| 1 | MAX30101 | OptoDevice:Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U1 |
| 1 | MCP73832T-2ACI/OT | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | MDBT50Q-1MV2 | RF_Module:Raytac_MDBT50Q | U8 |
| 1 | MOLEX 53261-0271 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J1 |
| 1 | MOLEX 53261-0571 | Connector_Molex:Molex_PicoBlade_53261-0571_1x05-1MP_P1.25mm_Horizontal | J2 |
| 1 | MPU-6500 | MPU-6500 footprint:QFN40P300X300X95-25N | U6 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | TLV61070ADBVR | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | TPD4S014DSQR | TPD4S014DSQR Footprint:SON40P200X200X80-11N | U10 |
| 1 | TPS7A0518PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | TPS7A0533PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | USB4105-GF-A-120 | USB4105-GF-A-120 footprint:GCT_USB4105-GF-A-120 | J3 |
| 1 | VCTA32251B-2R2MS6 | Inductor_SMD:L_1210_3225Metric | L1 |

Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.





Avinash1286/pendent
AURA: open wearable note-taking device development — PCB, printable case, firmware, Next.js/Convex notes, interactive 3D site and launch film.

jgrano/Nx-PCBA
Install all of these before opening the project:

It measures 26 × 45 mm and has 4 copper layers, 1.6 mm thick.
67 parts, built around the MDBT50Q-1MV2, LIS2MDL, MAX30101EFD+T and TPD4S014DSQR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NicholasMcSweenManickchand/Wearable-device repository on GitHub, at the commit this page was made from: the board is Schematic design.kicad_pcb and its schematic Schematic design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NicholasMcSweenManickchand before reusing the design.