

Pump interface
- Size
- 80.6 × 67.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 48
- Pads
- 119
- Tracks, vias
- 292, 20
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Jul 2024
- Updated
- 24 May 2026
Overview
Pump interface is an open-source printed circuit board by AbdELRahmanGamiel, from the AbdELRahmanGamiel/PcbDesignsHw repository on GitHub. It is a 2-layer board of 80.6 × 67.9 mm with 26 parts on 48 nets, routed with 292 tracks and 20 vias.
It is built around the ATMEGA328-PU, MAX232N and L7805. Its parts include 11 capacitors, 3 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C3, C4, C9, C10, C11 |
| 2 | 104 | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2, C7 |
| 2 | 22P | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C5, C6 |
| 1 | 0.1UF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 10/2W | Resistor_THT:R_Axial_Power_L20.0mm_W6.4mm_P25.40mm | R1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 16MH | Crystal:Resonator-2Pin_W10.0mm_H5.0mm | Y1 |
| 1 | 1N5407 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 334 | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | ATmega328-PU | Package_DIP:DIP-28_W7.62mm_Socket_LongPads | U3 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | Keypad | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LCD (20*4) | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | MAX232 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U2 |
| 1 | R_POT | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW1 |
| 1 | TO_USER_INTER | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal | J2 |
More from AbdELRahmanGamiel/PcbDesignsHw
12- 2 layers880.8 × 192.5 mm

- 2 layers

- 2 layers331.6 × 200.1 mm

- 2 layers

- 2 layers194.3 × 147.4 mm

- 2 layers

- 2 layers223.4 × 127.8 mm

- 2 layers139.8 × 192.5 mm

- 2 layers172.2 × 104.9 mm

- 2 layers109 × 120.8 mm

- 2 layers118.4 × 113.3 mm

- 2 layers

Similar boards
- 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers315.2 × 190 mm

- 2 layers238 × 174 mm

- 2 layers90.6 × 32.2 mm

- 2 layers44.9 × 95.6 mm

Bluetoothkiste
julianschick/bluetoothkiste
Bluetooth-Box für Segelflugzeuge zur Kommunikation mit LX und FLARM
62 parts5MIT - 2 layers52.1 × 27.9 mm

MinitelInterface
assoRED/MinitelInterface
Minitel to RS232 converter circuit (based on a MAX232 IC). Can literally be built with random stuff laying around at RED ;-)
13 parts2MIT - 2 layers135.6 × 85.3 mm

- 4 layers108.7 × 104.1 mm

RED 80
assoRED/RED_80
RED_80 is a super simple Z80 based MicroComputer designed and built by RED
48 parts
Questions
How big is the Pump interface PCB?
It measures 80.6 × 67.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pump interface use?
26 parts, built around the ATMEGA328-PU, MAX232N and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pump interface KiCad files?
From the AbdELRahmanGamiel/PcbDesignsHw repository on GitHub, at the commit this page was made from: the board is HARDWARE/pump_project/pump_interface/pump_interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pump interface design in my own project?
Its repository states no licence, so its author keeps all rights: ask AbdELRahmanGamiel before reusing the design.