

Counter sema lens30cm
- Size
- 880.8 × 192.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 597
- Nets
- 111
- Pads
- 1,350
- Tracks, vias
- 1,494, 28
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Jul 2024
- Updated
- 24 May 2026
Overview
Counter sema lens30cm is an open-source printed circuit board by AbdELRahmanGamiel, from the AbdELRahmanGamiel/PcbDesignsHw repository on GitHub. It is a 2-layer board of 880.8 × 192.5 mm with 597 parts on 111 nets, routed with 1,494 tracks and 28 vias.
It is built around the PIC16F877A-I/PT, ULN2803A and KBU808, with the TIP147 among its other parts. Its parts include 38 resistors, 19 connectors, 17 diodes, 7 ICs and 6 transistors. It belongs with the PIC boards of this library.
Main components
4PIC16F877A-I/PT
TQFP-44(10x10)-40℃~+85℃ 10bit 14KB 20MHz 256Byte 33 368Byte 4V~5.5V 8 Bit External FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysKBU808
KBU-55℃~+150℃ 1.1V@8A 10uA@800V 300A 800V 8A Single-Phase Rectifier KBU Bridge Rectifiers ROHSMDDBridge RectifiersTIP147
TO-220-3L-55℃~+150℃ 100V 10A 1mA 2V、3V 2W 50、1000 5V PNP TO-220-3L Darlington Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
597| Qty | Value | Footprint | References |
|---|---|---|---|
| 386 | LED | Arduino_pro_mini_mmf:LED_D5.0mm_centerd_modified-pad | G1, G10, G11, G100, G101, G102, G103, G104, G105, G106, G107, G108, G109, G110, G111, G112 +370 |
| 56 | 160R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Rg1, Rg2, Rg10, Rg11, Rg12, Rg13, Rg14, Rg15, Rg16, Rg17, Rg18, Rg19, Rg20, Rg21, Rg22, Rg23 +40 |
| 56 | 380R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Rr1, Rr2, Rr10, Rr11, Rr12, Rr13, Rr14, Rr15, Rr16, Rr17, Rr18, Rr19, Rr20, Rr21, Rr22, Rr23 +40 |
| 12 | 2.2k/2w | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P7.62mm_Vertical | R179, R180, R181, R182, R186, R187, R188, R189, R193, R194, R195, R196 |
| 12 | Screw_Terminal_01x01 | TestPoint:TestPoint_Plated_Hole_D5.0mm | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 7 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R177, R184, R191, R197, R201, R202, R203 |
| 7 | 5408/3A | Diode_THT:D_DO-27_P15.24mm_Horizontal | D1, D3, D7, D8, D12, D13, D17 |
| 5 | 820R/.5W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R171, R172, R173, R174, R175 |
| 3 | 104\400V | Capacitor_THT:C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | AC_C1, AC_C2, AC_C3 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R198, R199, R200 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R176, R183, R190 |
| 3 | 22k/3w-20k/1w | Resistor_THT:R_Axial_Power_L25.0mm_W9.0mm_P30.48mm | R178, R185, R192 |
| 3 | 2N2222 | Package_TO_SOT_THT:TO-92L_HandSolder | Q1, Q2, Q3 |
| 3 | 332R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R204, R205, R206 |
| 3 | D_Zener_16v | Diode_THT:D_A-405_P7.62mm_Horizontal | D6, D11, D16 |
| 3 | KBU808 | Diode_THT:Diode_Bridge_Vishay_KBU | D5, D10, D15 |
| 3 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4 |
| 3 | TIP147 | Package_TO_SOT_THT:TO-3P-3_Horizontal_TabDown | Q4, Q5, Q6 |
| 2 | 22p\25V | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | PIC_C2, PIC_C3 |
| 2 | ULN2803A | Package_DIP:DIP-18_W7.62mm_Socket_LongPads | U6, U7 |
| 1 | .1UF/25V | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | .33UF/25V | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 104\25V | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | PIC_C1 |
| 1 | 10R-500mA-3WATT/20R-250mA2-WATT | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R1 |
| 1 | 1A | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | C-Device | Capacitor_THT:CP_Radial_D35.0mm_P10.00mm_SnapIn | C3 |
| 1 | COLOR_220_I/P | TerminalBlock:TerminalBlock_Altech_AK300-4_P5.00mm | J13 |
| 1 | Crystal_Small | Crystal:Resonator-2Pin_W10.0mm_H5.0mm | Y51 |
| 1 | DC12V_I/P | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J15 |
| 1 | DC220V_O/P | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J14 |
| 1 | Heatsink | Heatsink:Heatsink_Fischer_SK104-STC-STIC_35x13mm_2xDrill2.5mm | HS1 |
| 1 | LED_G | LED_THT:LED_D5.0mm | D9 |
| 1 | LED_R | LED_THT:LED_D5.0mm | D4 |
| 1 | LED_RED | LED_THT:LED_D5.0mm | D2 |
| 1 | LED_Y | LED_THT:LED_D5.0mm | D14 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | PIC16F877A-IP | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U5 |
| 1 | TENS_SOCKET | Connector_Multicomp:Multicomp_MC9A22-2034_2x10_P2.54mm_Horizontal | J18 |
| 1 | TENS_SOCKET_SEG | Connector_Multicomp:Multicomp_MC9A22-2034_2x10_P2.54mm_Horizontal | J16 |
| 1 | UNITS_SOCKET | Connector_Multicomp:Multicomp_MC9A22-2034_2x10_P2.54mm_Horizontal | J17 |
| 1 | UNITS_SOCKET_SEG | Connector_Multicomp:Multicomp_MC9A22-2034_2x10_P2.54mm_Horizontal | J19 |
More from AbdELRahmanGamiel/PcbDesignsHw
12- 2 layers

- 2 layers331.6 × 200.1 mm

- 2 layers

- 2 layers194.3 × 147.4 mm

- 2 layers

- 2 layers223.4 × 127.8 mm

- 2 layers139.8 × 192.5 mm

- 2 layers172.2 × 104.9 mm

- 2 layers109 × 120.8 mm

- 2 layers118.4 × 113.3 mm

- 2 layers

- 2 layers

Similar boards
- 2 layers100.3 × 74.5 mm

Fonte regulavel
gabrielkscruz-eng/Fonte-Regulavel-de-1v-a-13v-e-de-5V
Um projeto de duas fontes de bancadas uma de 1v a 13v, e outra de 5v fixa, contendo o encapsulamento de MDF.
21 parts1 - 4 layers223.5 × 147.3 mm

- 2 layers129 × 83.3 mm

Power supply
prydin/opamp-frontend-class-ab
The result is a fast amplifier (>80V/us slew rate) with low distortion (0.00045% meadured @ 1kHz/1W/8ohm resistive load). It's undergone some preliminary measurements and looks quite promising.
40 parts4 - 4 layers62.4 × 125 mm

Supply
SSkrzypik03/Volumia-Amplifier
High-performance Class-D audio amplifier project with Post-Filter Feedback (PFFB) and DSP, designed to provide excellent sound quality, high efficiency, and flexible audio processing capabilities.
34 parts - 2 layers193.5 × 141 mm

PIC
hassan-ibn-mustafa/EduBoard_PIC16
An educational, single-layer development board designed to simplify learning and prototyping with the Microchip PIC16F877A microcontroller.
72 parts1 - 2 layers71.5 × 67.5 mm

1st
AbeetPaul/Smart-Load-Cell-Based-Food-Dispensing-Monitor-using-PIC16F877A-and-HX711-24-bit-ADC-
A custom PCB for precise food weight measurement, using a PIC16F877A and a 24-bit HX711 ADC to read load cell data.
9 parts - 2 layers94 × 106.7 mm

PicPongPCB
jaz-villanueva/pic-8x8-led-matrix-controller
Firmware and hardware implementation of an 8x8 LED matrix display using PIC microcontroller, featuring multiplexing control and custom display patterns.
21 partsApache-2.0 - 2 layers137.2 × 128.8 mm

3 mode bottle filling machine
Ukahelijah/PICproject-machine-
this project is a embedded system hardware project it contain both the hardware design file an software
49 parts
Questions
How big is the Counter sema lens30cm PCB?
It measures 880.8 × 192.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Counter sema lens30cm use?
597 parts, built around the PIC16F877A-I/PT, ULN2803A, KBU808 and TIP147. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Counter sema lens30cm KiCad files?
From the AbdELRahmanGamiel/PcbDesignsHw repository on GitHub, at the commit this page was made from: the board is HARDWARE/Counter/counter-sema-lens30cm/counter-sema-lens30cm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Counter sema lens30cm design in my own project?
Its repository states no licence, so its author keeps all rights: ask AbdELRahmanGamiel before reusing the design.