

STM32F103C8
various kicad projects
- Size
- 49.3 × 31.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 50
- Pads
- 136
- Tracks, vias
- 236, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2026
- Updated
- 18 Jun 2026
Overview
STM32F103C8 is an open-source printed circuit board by aaryataru1306, from the aaryataru1306/KICAD_PROJECTS repository on GitHub. It is a 2-layer board of 49.3 × 31.5 mm with 33 parts on 50 nets, routed with 236 tracks and 12 vias.
It is built around the AMS1117-3.3. Its parts include 13 capacitors, 5 resistors, 2 ICs, 2 switches and 1 diode. It belongs with the STM32 boards of this library.
Main components
1Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C7, C8, C9, C10, C11 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 1.5K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C1, SW1, UART1 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Crystal_GND23 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the STM32F103C8 PCB?
It measures 49.3 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32F103C8 use?
33 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F103C8 KiCad files?
From the aaryataru1306/KICAD_PROJECTS repository on GitHub, at the commit this page was made from: the board is STM32F103C8/STM32F103C8.kicad_pcb and its schematic STM32F103C8/STM32F103C8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F103C8 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aaryataru1306 before reusing the design.