Skip to the content
2 layers49 × 68 mmSingleTube, the printed circuit board in 3D

PCB Designs and software for an STM32-based nixie tube clock

Size
49 × 68 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
63
Pads
173
Tracks, vias
367, 44
Pours
5
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Jul 2026
Updated
12 Aug 2026

Overview

SingleTube is an open-source printed circuit board by aaguy-hue, from the aaguy-hue/nixie-project repository on GitHub. It is a 2-layer board of 49 × 68 mm with 40 parts on 63 nets, routed with 367 tracks and 44 vias.

It is built around the STM32F103C8T6, AMS1117-3.3 and MMBTA42. Its parts include 13 capacitors, 9 resistors, 4 ICs, 2 transistors and 2 connectors. It belongs with the lEDs and displays boards and the STM32 boards of this library.

Main components

3

README

README.md

Nixie Project

This is a collection of all the PCB designs and software I've written for an STM32-based Nixie tube clock.

Nixie tubes are some really neat old displays from back during the 1960s, though they kept being used in the USSR for quite a while, so you can find them on ebay being sold from various post-soviet states. They have a pretty cool signature orange-ish glow that looks cool, so I wanted to make a digital clock with them.

Note: Nixies operate at high voltage (albeit very low current), so make sure to exercise caution when working with them!


Online image of a Nixie clock (hopefully once mine is built I can replace this image with my own!)

Project Structure

This is a bit unorganized and will likely soon be refactored, but at the moment this is the structure:

  • 3D_Models: 3D models used in the PCBs (the NCH8200HV and my Micro USB connector)
  • NixieProject.pretty: Footprint library
  • nixies-us.pretty: A footprint library of various Nixie tubes
  • nixies-us.mod: Schematic symbols for different Nixie tubes
  • Single Tube Board: A PCB to power a single Nixie tube
  • software: Software for the various projects
    • nixie_simple: Software for breadboard experiments
    • single_nixie: Software for single Nixie tube PCB
  • symbols: Custom schematic symbols

Part descriptions

  • STM32F103C8T6: Microcontroller controlling the tubes
  • NCH8200HV: Voltage booster, input 2.5-15V, output 170V
  • AMS1117-3.3: 3.3V linear regulator
  • K155ID1: BCD-to-decimal decoder

The rest of the parts should be pretty self-explanatory.

Parts

40
QtyValueFootprintReferences
6100nCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C8, C9
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
21k5Resistor_SMD:R_0402_1005MetricR1, R3
220pCapacitor_SMD:C_0402_1005MetricC12, C13
222uCapacitor_SMD:C_0805_2012MetricC14, C15
230kResistor_SMD:R_1206_3216MetricR7, R10
24k7Resistor_SMD:R_1206_3216MetricR11, R12
28pCapacitor_SMD:C_0402_1005MetricC10, C11
2MMBTA42Package_TO_SOT_SMD:SOT-23Q1, Q2
110kResistor_SMD:R_1206_3216MetricR4
110kResistor_SMD:R_0402_1005MetricR2
110uCapacitor_SMD:C_0603_1608MetricC5
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11MResistor_SMD:R_1206_3216MetricR13
132.768KHzCrystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1IN-14Nixies-US:nixies-us-IN-14N1
1K155ID1NixieProject:SN74141NU5
1LOGOLOGOG***
1NCH8200HVNixieProject:NCH8200HVU2
1REDLED_SMD:LED_0603_1608MetricD1
1STM32F103C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU1
1SW_SPDTButton_Switch_THT:SW_E-Switch_EG1224_SPDT_AngledSW1
1USB_B_MicroConnector_USB:USB_Micro-B_XKB_U254-051T-4BH83-F1SJ1

Similar boards

  • 4 layers86 × 47 mmSmd board, the printed circuit board in 3D

    Smd board

    hinatadayo/nixie-token-display

    115 parts
  • 2 layers187.5 × 45 mmGamma spectrometer, the printed circuit board in 3D

    Gamma spectrometer

    Motokichirou/gamma-spectrometer

    NaI(Tl) gamma spectrometer: STM32G474 + R1307 PMT + 4-board stack, KiCad schematics, LTspice simulations

    231 parts
  • 2 layers148.5 × 90 mmZxRebornClock, the printed circuit board in 3D

    ZxRebornClock

    popovb/zxRebornClock

    Часы на ГРИ ИН-14 с синхронизацией времени через интернет

    125 partsMIT
  • 2 layers67.5 × 86.2 mmRf ontvanger, the printed circuit board in 3D

    Rf ontvanger

    sky71151/RF_Reciever_4ch

    4 channel reciever pcb

    74 parts
  • 4 layers128 × 60 mmNixiClockV1, the printed circuit board in 3D

    NixiClockV1

    zOnlyKroks/pcb-consortium

    117 partsCC0-1.0
  • 2 layers68 × 40 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    44 parts170CC0-1.0
  • 2 layers99.1 × 58.4 mmHEAT, the printed circuit board in 3D

    HEAT

    milar111/HEAT

    An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.

    57 parts9
  • 2 layers71.3 × 25.4 mmUSB DALI, the printed circuit board in 3D

    USB DALI

    even-notodd/USB-DALI

    USB-DALI interface converter

    43 parts4

Questions

How big is the SingleTube PCB?

It measures 49 × 68 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SingleTube use?

40 parts, built around the STM32F103C8T6, AMS1117-3.3 and MMBTA42. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SingleTube KiCad files?

From the aaguy-hue/nixie-project repository on GitHub, at the commit this page was made from: the board is Single Tube Board/singleTube/singleTube.kicad_pcb and its schematic Single Tube Board/singleTube/singleTube.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SingleTube design in my own project?

Its repository states no licence, so its author keeps all rights: ask aaguy-hue before reusing the design.