
Motion pcb
a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.

The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.
A3motion buttonmatrix v01 is an open-source printed circuit board by a3-audio, from the a3-audio/a3-motion repository on GitHub. It is a 2-layer board of 130 × 130 mm with 102 parts on 183 nets, routed with 561 tracks and 137 vias.
It is built around the WS2811 and 228CMVARGBFR. Its parts include 48 resistors, 16 capacitors, 16 ICs, 16 switches and 1 connector.
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.
This repository holds the panel firmware (firmware/, ESP32-S3) and the PCB and
housing designs (hardware/; the boards in pcb/, one folder per revision: v1 the first boards (mainboard and button matrix), v3_1 the current one). The touchscreen app is
a3-motion-ui, wired in here as the
submodule a3-motion-ui (named ui until 2026-10-31: every submodule path is
now its repository's name).

Documentation: https://a3-audio.github.io/a3-doc/
A PlatformIO project for the esp32-s3-devkitc-1-n16r8. Run from firmware/:
pio run # build
pio run -t upload # flash
pio device monitor # serial monitor, 115200 baud
pio test -e native # host-side unit tests
python3 -m unittest test_hostUpload and monitor need no port. They find the panel by its USB ID, the CH343
bridge 1A86:55D3 (build.hwids in boards/esp32-s3-devkitc-1-n16r8.json).
host.py polls the firmware over serial and prints the decoded buttons,
encoders and pots (python3 host.py; needs pyserial). Its docstring lists
the options and describes the binary poll-frame protocol. Use it to tell a
firmware fault from a fault in the UI.
Motion UI runs on any Linux machine with a touchscreen, and the panel connects
to it over USB. It is tested on a NUC (on the rig, the Core machine) and was
first planned for a Raspberry Pi 5; see
Hardware
in the docs. The i3 config, the X rules and the user service are in the UI
repository, under
platform_config/.
REUSE-compliant: the licenses are in LICENSES/, which file has which is in
.reuse/dep5.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 33 | Resistor_SMD:R_2512_6332Metric | R0.1, R0.2, R1.1, R1.2, R10.1, R10.2, R11.1, R11.2, R12.1, R12.2, R13.1, R13.2, R14.1, R14.2, R15.1, R15.2 +16 |
| 16 | 100 | Resistor_SMD:R_2512_6332Metric | R0.3, R1.3, R2.3, R3.3, R4.3, R5.3, R6.3, R7.3, R8.3, R9.3, R10.3, R11.3, R12.3, R13.3, R14.3, R15.3 |
| 16 | 104 | Capacitor_SMD:C_1206_3216Metric | C0, C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 16 | 228CMVARGBFR | SamacSys_Parts:228CMVARGBFR | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15 |
| 16 | WS2811 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U0, U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_Pad_Via | H1, H2, H3, H4, H5 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical_SMD | J2 |

a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.

a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.

a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.

a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.

Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!


dmcke5/XWii-Controller
The Wii U gamepad layout is a fan-favourite for many gamers yet it is rarely used in the current generation of controllers.



carlos-paniagua/TapeTicsProject
This repository contains the hardware and software design files for TapeTics

JCohner/booth
Using 1000 NeoPixels with FastLED library we are controlling a custom built DJ booths lighting. The NeoPixels are organzied into rectangles on a DJ of which the light difuses around the rectnagle.
It measures 130 × 130 mm and has 2 copper layers, 1.6 mm thick.
102 parts, built around the WS2811 and 228CMVARGBFR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the a3-audio/a3-motion repository on GitHub, at the commit this page was made from: the board is hardware/pcb/v1/a3motion_buttonmatrix_v01.kicad_pcb and its schematic hardware/pcb/v1/a3motion_buttonmatrix_v01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask a3-audio before reusing the design.