Skip to the content
2 layers80 × 80 mmZTL Badge Hardware, the printed circuit board in 3D
Size
80 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
28
Pads
85
Tracks, vias
143, 8
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Mar 2024
Updated
27 Jul 2024

Overview

ZTL Badge Hardware is an open-source printed circuit board by ZTL-Space, from the ZTL-Space/ZTL-Badge-Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 80 mm with 16 parts on 28 nets, routed with 143 tracks and 8 vias.

It is built around the ATMEGA328P-PU and CR2032. Its parts include 5 capacitors, 3 switches, 2 connectors, 1 resistor and 1 IC. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

ZTL-Badge-Hardware

Parts

16
QtyValueFootprintReferences
2100nFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1, C2
222pFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC3, C4
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC5
11088BS1088BS:1088BSD1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
18MHzCrystal:Crystal_HC49-4H_VerticalY1
1ATmega328P-PPackage_DIP:DIP-28_W7.62mmU1
1CR20321088BS:Knopfzellenclip_20mmBT1
1ISPConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1Left ButtonKurzhubtaster:KurzhubtasterSW1
1MountingHoleMountingHole:MountingHole_5.3mm_M5_DIN965_PadH1
1Power SwitchESP101:ESP101SW3
1Right ButtonKurzhubtaster:KurzhubtasterSW2
1UARTConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ1

Similar boards

  • 2 layers110 × 50 mmNixie clock back, the printed circuit board in 3D

    Nixie clock back

    iley/nixie-clock

    Yet another nixie tube clock

    22 partsMIT
  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    skiselev/omega

    Omega Home Computer

    248 parts459GPL-3.0
  • 2 layers17.2 × 30.4 mmWeigand, the printed circuit board in 3D

    Weigand

    linklayer/BLEKey

    A Bluetooth Low Energy device for interfacing with Wiegand

    17 parts268
  • 4 layers188 × 188 mmITX Llama, the printed circuit board in 3D

    ITX Llama

    eivindbohler/itxllama

    422 parts246GPL-3.0
  • 2 layers61 × 36.8 mmKeebcard, the printed circuit board in 3D

    Keebcard

    rsheldiii/Keebcard

    Home of the KeebCard project - Kicad files, code, and more!

    15 parts112
  • 2 layers59.2 × 41 mmBluey, the printed circuit board in 3D

    Bluey

    electronut/ElectronutLabs-bluey

    Nordic nRF52832 BLE development board with sensors.

    79 parts96
  • 2 layers35 × 35 mmQron0b, the printed circuit board in 3D

    Qron0b

    qewer33/qron0b

    a sleek and low-power binary wristwatch

    35 parts62GPL-3.0
  • 2 layers90 × 89.4 mm38-04-usb sleuth, the printed circuit board in 3D

    38-04-usb sleuth

    smaroukis/usb-sleuth

    USB cable continuity tester ++

    68 parts61

Questions

How big is the ZTL Badge Hardware PCB?

It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ZTL Badge Hardware use?

16 parts, built around the ATMEGA328P-PU and CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ZTL Badge Hardware KiCad files?

From the ZTL-Space/ZTL-Badge-Hardware repository on GitHub, at the commit this page was made from: the board is ZTL-Badge-Hardware.kicad_pcb and its schematic ZTL-Badge-Hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ZTL Badge Hardware design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).