

Receiver
Custom ESP32 BLE HID controller + matching PCB design.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 38
- Pads
- 58
- Tracks, vias
- 22, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Jun 2025
- Updated
- 16 Feb 2026
Overview
Receiver is an open-source printed circuit board by ZBZFirst, from the ZBZFirst/KiCad-Projects repository on GitHub. It is a 2-layer board with 3 parts on 38 nets, routed with 22 tracks and 0 vias.
It is built around the ADS1115IDGS. Its parts include 1 IC and 1 connector.
Main components
1README
README.mdESP32 Controller
Reference Images
PCB Layout
Attachment
Finished Build
Custom ESP32 BLE HID controller + matching PCB design.
This project combines:
- ESP32 firmware (BLE composite keyboard + mouse)
- KiCad PCB layout for a dedicated 7-button controller
- Multi-mode input system for productivity + automation
Designed as a personal hardware controller that behaves like a wireless keyboard/mouse macro pad.
Features
- BLE composite HID device (keyboard + mouse)
- 7 physical buttons
- Mode switching system
- Auto-click / auto-key spam mode
- Windows quick-launch macros
- Non-blocking firmware architecture
- Visual LED status patterns
- Custom PCB layout (KiCad)
Hardware
Board
ESP32-based custom PCB with:
- 7 tactile switches
- Onboard LED status indicator
- ESP32 dev module header
- Dedicated GPIO routing per button
KiCad layout included in repository.
File:
hardware/Controller.kicad_pcbThis board is designed specifically to run the included firmware.
Firmware Behavior
The controller has 3 operating groups.
Button 6 cycles groups.
Button 7 forces disconnect (reboot).
Group 1 — Default Productivity
| Button | Action |
|---|---|
| B1 | Ctrl + C |
| B2 | Ctrl + V |
| B3 | Ctrl + X |
| B4 | Ctrl + Z |
| B5 | 8-second mouse movement run |
LED: solid ON when connected
Group 2 — Work Launch Macros
| Button | Action |
|---|---|
| B1 | Windows search → cmd → ssh CB37 |
| B2 | Launch Edge |
| B3 | Launch Super |
| B4 | Launch Arduino |
| B5 | Launch Bluetooth |
LED: 2 blink pattern
Group 3 — Auto Mode
Toggle behaviors:
| Button | Mode |
|---|---|
| B1 | Auto left click |
| B2 | Auto right click |
| B3 | Auto middle click |
| B4 | Spam key “E” |
| B5 | Spam key “F” |
Press the same button again to stop.
LED: 3 blink pattern
LED Status
- Off → not connected
- Solid → group 1
- 2 blinks → group 2
- 3 blinks → group 3
Blink sequence repeats every 2 seconds.
Installation
Requirements
- Arduino IDE
- ESP32 board package
- NimBLE / BLE HID libraries
Open:
firmware/PaulsESP32.inoCompile and upload to the board.
Usage
- Power the controller
- Pair over Bluetooth
- Use button 6 to select mode
- Use buttons 1–5 for actions
Designed primarily for Windows but functions as a generic BLE HID device.
Project Structure
firmware/
PaulsESP32.ino
hardware/
Controller.kicad_pcb
schematics/Credits
PCB + firmware design: Paul Casillas
Artwork: Bree Pierce
Personal project.
License
MIT — free to modify and build.
file is in
AutoClicker/AutoClickerbyController.ino
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ADS1115IDGS | UserDefined:ADS1115FootPrint | U1 |
| 1 | AveaLogic | Connector_Dsub:DSUB-25_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J1 |
| 1 | ~ | UserDefined:ESP32-DEVKITV1-Paul-Half2 | ESP32 Right Side1 |
More from ZBZFirst/KiCad-Projects
5- 2 layers45.3 × 75.9 mm

- 2 layers52.8 × 49 mm

- 2 layers25.4 × 17.8 mm

- 2 layers25.4 × 17.8 mm

- 2 layers

Similar boards
- 4 layers70 × 43 mm

USMU v10
joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware
137 parts187 - 4 layers66.3 × 40.2 mm

Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers192.1 × 126.9 mm

Stradex1
Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…
24 parts101 - 4 layers100 × 49.8 mm

- 2 layers96 × 74.4 mm

Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 4 layers160 × 73.2 mm

MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers140.7 × 86.5 mm

- 4 layers20 × 30 mm

NanoAmmeter v2
joeltroughton/nanoAmmeter
A small ammeter for measuring printed glucose biosensors
35 parts29
Questions
What parts does the Receiver use?
3 parts, built around the ADS1115IDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Receiver KiCad files?
From the ZBZFirst/KiCad-Projects repository on GitHub, at the commit this page was made from: the board is Receiver/Receiver.kicad_pcb and its schematic Attachment2/Attachment2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Receiver design in my own project?
Its repository states no licence, so its author keeps all rights: ask ZBZFirst before reusing the design.