
8ch driver v0
YoungerLaboratory/solenoid-driver
Boston University's Younger Lab Solenoid Drivers

Boston University's Younger Lab Solenoid Drivers
16ch driver v1 is an open-source printed circuit board by YoungerLaboratory, from the YoungerLaboratory/solenoid-driver repository on GitHub. It is a 4-layer board of 99.3 × 127.3 mm with 242 parts on 236 nets, routed with 1,116 tracks and 308 vias.
It is built around the DRV104PWP, 2N7002E and PMEG10010ELRX, with the TBL009-254-16GY-2GY, 0ZCF0125FF2C and PJ-063AH among its other parts. Its parts include 96 resistors, 49 capacitors, 48 diodes, 17 ICs and 16 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 4k7 | Resistor_SMD:R_1206_3216Metric | R1, R10, R12, R13, R16, R18, R19, R22, R24, R25, R28, R30, R31, R34, R36, R37 +32 |
| 16 | 0.18uF | Capacitor_SMD:C_1206_3216Metric | C3, C6, C9, C12, C15, C18, C21, C24, C27, C30, C33, C36, C39, C42, C45, C48 |
| 16 | 10uF | Capacitor_SMD:C_1210_3225Metric | C2, C5, C8, C11, C14, C17, C20, C23, C26, C29, C32, C35, C38, C41, C44, C47 |
| 16 | 162k | Resistor_SMD:R_1206_3216Metric | R2, R8, R14, R20, R26, R32, R38, R44, R50, R56, R62, R68, R74, R80, R86, R92 |
| 16 | 191k | Resistor_SMD:R_1206_3216Metric | R5, R11, R17, R23, R29, R35, R41, R47, R53, R59, R65, R71, R77, R83, R89, R95 |
| 16 | 2N7002E | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 16 | 470pF | Capacitor_SMD:C_1206_3216Metric | C4, C7, C10, C13, C16, C19, C22, C25, C28, C31, C34, C37, C40, C43, C46, C49 |
| 16 | 49R9 | Resistor_SMD:R_1206_3216Metric | R3, R9, R15, R21, R27, R33, R39, R45, R51, R57, R63, R69, R75, R81, R87, R93 |
| 16 | DRV104PWP | footprint:IC_TPS27S100BPWPR | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16 |
| 16 | LED | LED_SMD:LED_0805_2012Metric | D3, D6, D9, D12, D15, D18, D21, D24, D27, D30, D33, D36, D39, D42, D45, D48 |
| 16 | LED Green | LED_SMD:LED_0805_2012Metric | D2, D5, D8, D11, D14, D17, D20, D23, D26, D29, D32, D35, D38, D41, D44, D47 |
| 16 | PMEG10010ELRX | Diode_SMD:Nexperia_CFP3_SOD-123W | D1, D4, D7, D10, D13, D16, D19, D22, D25, D28, D31, D34, D37, D40, D43, D46 |
| 8 | LPF-C014301S | footprint:Lightpipe_LPF-C014301S | LP1, LP2, LP3, LP4, LP5, LP6, LP7, LP8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | TBL009-254-16GY-2GY | footprint:CUI_TBL009-254-16GY-2GY | J3, J4 |
| 1 | 0ZCF0125FF2C | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X_Pad2.25x2.55mm_HandSolder | C1 |
| 1 | FT4232H MINI MODULE | footprint:FT4232H_MINI_MODULE | U18 |
| 1 | PJ-063AH | footprint:CUI_PJ-063AH | J1 |

YoungerLaboratory/solenoid-driver
Boston University's Younger Lab Solenoid Drivers

YoungerLaboratory/solenoid-driver
Boston University's Younger Lab Solenoid Drivers

YoungerLaboratory/solenoid-driver
Boston University's Younger Lab Solenoid Drivers

YoungerLaboratory/solenoid-driver
Boston University's Younger Lab Solenoid Drivers


YoungerLaboratory/solenoid-driver
Boston University's Younger Lab Solenoid Drivers


Coen-Lab/exp-control-board
Hardware and firmware for an experimental control board for scientific rigs

nhallsny/faraday-rescue
Open source battery for e-bikes made by the now-defunct Faraday Bicycles


EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...

G-Pereira/greenmobi-drive
A FOC motor drive compatible with VESC


It measures 99.3 × 127.3 mm and has 4 copper layers, 1.6 mm thick.
242 parts, built around the DRV104PWP, 2N7002E, PMEG10010ELRX and TBL009-254-16GY-2GY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the YoungerLaboratory/solenoid-driver repository on GitHub, at the commit this page was made from: the board is 8ch-driver-v2/16ch-driver-v1.kicad_pcb and its schematic 2ch-driver-v0/2ch-driver-v0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask YoungerLaboratory before reusing the design.