
EcoApi pcb
EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...

Electronic load is an open-source printed circuit board by dominika0808, from the dominika0808/Electronic_load_PCB repository on GitHub. It is a 2-layer board of 96.1 × 146.4 mm with 145 parts on 128 nets, routed with 797 tracks and 505 vias.
It is built around the MCP4728-E/UN, USBLC6-2SC6 and STP55NF06L, with the IXFQ50N60P3, PMEG10010ELRX and SM6T6V8A among its other parts. Its parts include 56 resistors, 34 capacitors, 20 connectors, 11 transistors and 9 ICs. It belongs with the power boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 12 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R14, R15, R16, R17, R18, R19, R22, R23, R24, R25, R26, R27, R30, R31, R32, R33 +8 |
| 12 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C7, C11, C12, C13, C14, C15, C25, C26, C27, C28 |
| 9 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C19, C20, C29, C30, C31, C32, C33, C34 |
| 9 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 7 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R44, R45, R46, R53, R54, R55, R56 |
| 7 | STP55NF06L | Package_TO_SOT_THT:TO-220-3_Vertical | Q5, Q6, Q7, Q8, Q9, Q10, Q11 |
| 6 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R47, R48, R49, R50, R51, R52 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R21, R29, R37 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R20, R28, R36 |
| 4 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C22, C23, C24 |
| 4 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2, F3, F4, F5 |
| 4 | IXFQ50N60P3 | Package_TO_SOT_THT:TO-3P-3_Vertical | Q1, Q2, Q3, Q4 |
| 4 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J17, J18, J19, J20 |
| 4 | TL071 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U6, U7, U8, U9 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5 |
| 3 | PMEG10010ELRX | Diode_SMD:Nexperia_CFP3_SOD-123W | D4, D5, D6 |
| 2 | 10uF | Capacitor_SMD:C_Elec_4x5.8 | C9, C10 |
| 2 | 14k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11 |
| 2 | 18p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 240k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R10 |
| 2 | 5.1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | D_Zener | Diode_SMD:D_SOD-123F | D2, D3 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_HandSolder | C4 |
| 1 | 12MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 1 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_HandSolder | C2 |
| 1 | 2.2uF | Capacitor_SMD:C_Elec_4x5.4 | C8 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | Barrel_Jack_Switch_Pin3Ring | Connector_BarrelJack:BarrelJack_Wuerth_694106106102_2.0x5.5mm | J1 |
| 1 | Conn_01x03 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Conn_01x07 | Connector_JST:JST_EH_B7B-EH-A_1x07_P2.50mm_Vertical | J5 |
| 1 | Conn_02x07_Top_Bottom | Connector_JST:JST_PHD_B14B-PHDSS_2x07_P2.00mm_Vertical | J6 |
| 1 | LF33_TO252 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | MCP4728 | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | SM6T6V8A | Diode_SMD:D_SMB | D1 |
| 1 | STM32G491METx | Package_QFP:LQFP-80_12x12mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J7 |
The 141 most common of 145 parts.

EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...

martonmiklos/DJI_RC_N1_ESP32
Replacement PCB to the DJI RC-N1 remote based on an ESP32




lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team


andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
It measures 96.1 × 146.4 mm and has 2 copper layers, 1.6 mm thick.
145 parts, built around the MCP4728-E/UN, USBLC6-2SC6, STP55NF06L and IXFQ50N60P3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dominika0808/Electronic_load_PCB repository on GitHub, at the commit this page was made from: the board is electronic_load.kicad_pcb and its schematic electronic_load.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dominika0808 before reusing the design.