Skip to the content
2 layers52.2 × 26.7 mmDCmotorspeedcontroller, the printed circuit board in 3D

controls the speed of the motor using potentiometer (PCB design)

Size
52.2 × 26.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
11
Pads
38
Tracks, vias
71, 2
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Sep 2025
Updated
5 Sep 2025

Overview

DCmotorspeedcontroller is an open-source printed circuit board by Yashwanthprasads, from the Yashwanthprasads/DCmotorspeedcontroller--Hardware-design repository on GitHub. It is a 2-layer board of 52.2 × 26.7 mm with 15 parts on 11 nets, routed with 71 tracks and 2 vias.

It is built around the NE555P and TIP122. Its parts include 4 diodes, 3 capacitors, 3 resistors, 2 connectors and 1 IC.

Main components

2

README

README.md

DCmotorspeedcontroller--Hardware-design

controls the speed of the motor using potentiometer (PCB design)

Parts

15
QtyValueFootprintReferences
31N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3
2100nFCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C2
21KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2
2Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1, J2
11000nFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
1100KPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV1
12.2KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
1LEDLED_THT:LED_D5.0mmD4
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1TIP122Package_TO_SOT_THT:TO-220-3_VerticalQ1

Similar boards

  • 2 layers68 × 50.5 mmFanspeed, the printed circuit board in 3D

    Fanspeed

    Aniket95-code/Fan-Speed-Controller-NE555-PCB-design

    A simple, low-cost DC fan speed controller built around the classic NE555 timer IC operating in astable mode. Fan speed is adjusted by varying the PWM duty cycle via a potentiometer, while a TIP122 Darlington transistor…

    19 parts2
  • 2 layersDC motor speed controller, the printed circuit board in 3D

    DC motor speed controller

    arijit-arijit/pcb_design

    my journey in learning to design PCBs from scratch through tutorials and projects

    19 parts1
  • 2 layers65.3 × 33.8 mmDC Motor Speed Controller, the printed circuit board in 3D

    DC Motor Speed Controller

    adityajoshi2008/555-Timer-PWM-DC-Motor-Speed-Controller

    **555 timer-based PWM DC motor speed controller designed and developed in KiCAD for practical motor speed control.

    20 parts
  • 2 layers167.5 × 124 mmMINORAVG, the printed circuit board in 3D

    MINORAVG

    apekg-blip/PWM-based-dc-motor-speed-controller

    Built an analog DC motor speed controller using an NE555 timer IC and LM3914 LED bar graph for duty-cycle visualization. Designed the circuit schematic in KiCad, gaining experience in PWM and analog motor control

    60 parts
  • 2 layers58.3 × 35 mmDC Motor Speed Controller, the printed circuit board in 3D

    DC Motor Speed Controller

    Hirusha785/DC-Motor-Speed-Controller-PCB

    ⚡ NE555 PWM DC motor speed controller PCB designed in KiCad, featuring adjustable speed control, TIP122 driver stage, flyback protection, screw terminals, and 3D PCB renders.

    21 parts
  • 2 layers62.7 × 28.9 mmDC moter speed controller, the printed circuit board in 3D

    DC moter speed controller

    Mahender0408/Embedded-Systems-Projects

    Embedded Systems, IoT and PCB Design Projects

    19 parts
  • 2 layers57 × 32.5 mmDC MOTOR SPEED CONTROLER USING TIMER IC, the printed circuit board in 3D

    DC MOTOR SPEED CONTROLER USING TIMER IC

    MuhammadAbuzarCUI/DC-Motor-Speed-Controller-Using-555-Timer-IC-PCB-Designed-in-KiCad

    PCB design of a DC motor speed controller using the 555 timer IC to generate a PWM signal for speed control. Includes circuit schematic and PCB layout for motor speed regulation by adjusting the PWM duty cycle.

    15 parts
  • 2 layers50.4 × 33.3 mmDC motor speed controller, the printed circuit board in 3D

    DC motor speed controller

    Noraiz963/DC-Motor-Controller

    A 555-timer-based DC motor speed controller designed in KiCad — uses a variable-duty-cycle PWM signal driven through a power transistor to control motor speed with a single potentiometer.

    21 parts

Questions

How big is the DCmotorspeedcontroller PCB?

It measures 52.2 × 26.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DCmotorspeedcontroller use?

15 parts, built around the NE555P and TIP122. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DCmotorspeedcontroller KiCad files?

From the Yashwanthprasads/DCmotorspeedcontroller--Hardware-design repository on GitHub, at the commit this page was made from: the board is DCmotorspeedcontroller.kicad_pcb and its schematic DCmotorspeedcontroller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DCmotorspeedcontroller design in my own project?

Its repository states no licence, so its author keeps all rights: ask Yashwanthprasads before reusing the design.