Skip to the content
2 layers65.3 × 33.8 mmDC Motor Speed Controller, the printed circuit board in 3D

**555 timer-based PWM DC motor speed controller designed and developed in KiCAD for practical motor speed control.

Size
65.3 × 33.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
11
Pads
42
Tracks, vias
61, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Aug 2026
Updated
9 Aug 2026

Overview

DC Motor Speed Controller is an open-source printed circuit board by adityajoshi2008, from the adityajoshi2008/555-Timer-PWM-DC-Motor-Speed-Controller repository on GitHub. It is a 2-layer board of 65.3 × 33.8 mm with 20 parts on 11 nets, routed with 61 tracks and 0 vias.

It is built around the NE555P and TIP122. Its parts include 4 diodes, 3 capacitors, 3 resistors, 2 connectors and 1 IC. It belongs with the robots and motor control boards of this library.

Main components

2

README

README.md

555-Timer-PWM-DC-Motor-Speed-Controller

**555 timer-based PWM DC motor speed controller designed and developed in KiCAD for practical motor speed control.

DC Motor Speed Controller ⚙️

A PCB design project for controlling the speed of a DC motor using a 555 timer-based PWM circuit. The schematic and PCB were designed in KiCad, with the goal of creating a compact and practical motor speed controller.

🔧 Project Overview

The controller uses an NE555P timer to generate a PWM signal. A potentiometer is used to adjust the PWM duty cycle, which controls the power delivered to the motor and therefore allows its speed to be varied.

The output stage uses a TIP122 Darlington transistor to drive the motor, while a 1N4007 diode provides protection against the motor's inductive voltage spikes.

🧩 Main Components

ComponentValue / Part
Timer ICNE555P
Power TransistorTIP122
Potentiometer100kΩ
Diodes1N4007
Capacitors100nF, 1000µF
Resistors1kΩ, 2.2kΩ
IndicatorsLED
Connectors2-pin screw terminals

🛠️ Tools Used

  • KiCad 10
  • Schematic Editor
  • PCB Editor
  • PCB Layout & Routing
  • Gerber Generation

📂 Repository Contents

text
DC-Motor-Speed-Controller/
│
├── DC Motor Speed Controller.kicad_sch
├── DC Motor Speed Controller.kicad_pcb
│
├── Gerbers/
│   └── PCB manufacturing files
│
├── Images/
│   ├── PCB_Front.png
│   └── PCB_Back.png
│
└── README.md

📚 What I Learned

This project helped me gain practical experience with:

  • 555 timer circuits
  • PWM-based motor speed control
  • Transistor-based motor driving
  • Flyback protection for inductive loads
  • Schematic design in KiCad
  • PCB component placement
  • PCB routing
  • Generating Gerber files
  • Preparing a PCB design for manufacturing

🚀 Future Improvements

Possible improvements for a future version include:

  • Adding better motor current protection
  • Adding a fuse or dedicated protection stage
  • Improving thermal management of the power transistor
  • Adding reverse-polarity protection
  • Testing and documenting the actual motor voltage, current and speed range

⚠️ Safety

This controller is intended for suitable low-voltage DC motor applications. Use an appropriate DC power supply and ensure that the motor current does not exceed the capabilities of the switching and PCB components.

Do not connect this circuit directly to AC mains.


👨‍💻 Author

Aditya Joshi

B.Tech ECE (Semiconductor)

Interested in PCB Design, Electronics, VLSI and Embedded Systems.

Parts

20
QtyValueFootprintReferences
31N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3
2100nFCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C2
21KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2
2Screw_Terminal_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ1, J2
11000uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
12.2KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
1LEDLED_THT:LED_D5.0mmD4
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1R_PotentiometerPotentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal100k1
1TIP122Package_TO_SOT_THT:TO-220-3_VerticalQ1

The 15 most common of 20 parts.

Similar boards

  • 2 layers68 × 50.5 mmFanspeed, the printed circuit board in 3D

    Fanspeed

    Aniket95-code/Fan-Speed-Controller-NE555-PCB-design

    A simple, low-cost DC fan speed controller built around the classic NE555 timer IC operating in astable mode. Fan speed is adjusted by varying the PWM duty cycle via a potentiometer, while a TIP122 Darlington transistor…

    19 parts2
  • 2 layersDC motor speed controller, the printed circuit board in 3D

    DC motor speed controller

    arijit-arijit/pcb_design

    my journey in learning to design PCBs from scratch through tutorials and projects

    19 parts1
  • 2 layers167.5 × 124 mmMINORAVG, the printed circuit board in 3D

    MINORAVG

    apekg-blip/PWM-based-dc-motor-speed-controller

    Built an analog DC motor speed controller using an NE555 timer IC and LM3914 LED bar graph for duty-cycle visualization. Designed the circuit schematic in KiCad, gaining experience in PWM and analog motor control

    60 parts
  • 2 layers58.3 × 35 mmDC Motor Speed Controller, the printed circuit board in 3D

    DC Motor Speed Controller

    Hirusha785/DC-Motor-Speed-Controller-PCB

    ⚡ NE555 PWM DC motor speed controller PCB designed in KiCad, featuring adjustable speed control, TIP122 driver stage, flyback protection, screw terminals, and 3D PCB renders.

    21 parts
  • 2 layers62.7 × 28.9 mmDC moter speed controller, the printed circuit board in 3D

    DC moter speed controller

    Mahender0408/Embedded-Systems-Projects

    Embedded Systems, IoT and PCB Design Projects

    19 parts
  • 2 layers57 × 32.5 mmDC MOTOR SPEED CONTROLER USING TIMER IC, the printed circuit board in 3D

    DC MOTOR SPEED CONTROLER USING TIMER IC

    MuhammadAbuzarCUI/DC-Motor-Speed-Controller-Using-555-Timer-IC-PCB-Designed-in-KiCad

    PCB design of a DC motor speed controller using the 555 timer IC to generate a PWM signal for speed control. Includes circuit schematic and PCB layout for motor speed regulation by adjusting the PWM duty cycle.

    15 parts
  • 2 layers50.4 × 33.3 mmDC motor speed controller, the printed circuit board in 3D

    DC motor speed controller

    Noraiz963/DC-Motor-Controller

    A 555-timer-based DC motor speed controller designed in KiCad — uses a variable-duty-cycle PWM signal driven through a power transistor to control motor speed with a single potentiometer.

    21 parts
  • 2 layersDc motor speed controller 5, the printed circuit board in 3D

    Dc motor speed controller 5

    Rohit85885/Dc-motor-speed-controller-

    > **Designed a DC Motor Speed Controller PCB using KiCad 9. The project regulates DC motor speed through efficient control circuitry, featuring schematic design, PCB layout, optimized routing, and ERC/DRC verification.

    19 partsMIT

Questions

How big is the DC Motor Speed Controller PCB?

It measures 65.3 × 33.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DC Motor Speed Controller use?

20 parts, built around the NE555P and TIP122. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DC Motor Speed Controller KiCad files?

From the adityajoshi2008/555-Timer-PWM-DC-Motor-Speed-Controller repository on GitHub, at the commit this page was made from: the board is KiCAD/DC Motor Speed Controller.kicad_pcb and its schematic KiCAD/DC Motor Speed Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DC Motor Speed Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask adityajoshi2008 before reusing the design.