
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

FC660C 有线替换主控,引脚与hasu版本一致,有贴片小喇叭,可以结合QMK使用。
Fc660c is an open-source printed circuit board by YCF, from the YCF/FC660C-Alt-Controller repository on GitHub. It is a 2-layer board of 98.3 × 35 mm with 29 parts on 30 nets, routed with 552 tracks and 158 vias.
It is built around the ATMEGA32U4 and SPX3819M5-L-3-3. Its parts include 12 capacitors, 5 resistors, 2 ICs, 2 connectors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C4, C6, C7, C8 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C5, C9, C11, C12 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | LOGO | mod:whiteHat | G***, G*** |
| 2 | MountingHole_Pad | Hole:MountingHole_3.2_long | H1, H2 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 16M | Resonator:murata-resonator_SMD_CSTCE16M0V53-R0 | Y1 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C10 |
| 1 | ATMEGA32U4 | 32u4:TQFP44+QFN44 | U1 |
| 1 | Conn_01x20_MountingPin | DF14:HRS_DF14_20P | J2 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SW_PUSH | Switches:SW_Rest | SW1 |
| 1 | Speaker | Speaker:SPK | LS1 |
| 1 | USB_MINI-B | USB_Connectors:USB_MINI-B-marked | J1 |

joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware



evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)



It measures 98.3 × 35 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ATMEGA32U4 and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the YCF/FC660C-Alt-Controller repository on GitHub, at the commit this page was made from: the board is kicad/fc660c/fc660c.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask YCF before reusing the design.