
ESP32-C3-WROOM02 dev board
pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.

Custom Dev Board for ESP32 C3 Mini design in KiCAD 10.0
Project1 ESP32Mini is an open-source printed circuit board by XingdeToo, from the XingdeToo/ESP32-C3-Mini repository on GitHub. It is a 4-layer board of 29.5 × 35.1 mm with 35 parts on 33 nets, routed with 272 tracks and 28 vias.
It is built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3 and USBLC6-2SC6, with the PESD5V0L1ULD among its other parts. Its parts include 13 resistors, 10 capacitors, 3 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R9 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7, C8 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C6 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R8 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R13 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4, J5 |
| 2 | ~ | Button_Switch_SMD:SW_SPST_EVQP2_MiddlePushTravel_H2.5mm | SW1, SW2 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | FC-135 32.7680KA-A5 | 5_Crystal:XTAL_FC-135_EPS | X1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | PESD5V0L1ULD | Diode_SMD:D_SOD-882D | D1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | ~ | 4_LED:LED_156120M173000 | LED1 |

pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.

anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project

NozomiNetworks/NN-antenna-manager
Open source project for a custom antenna manager for SDR cards

Akshath2002/ESP32-Mini-Evaluation-Board
A compact 4-layer ESP32 evaluation board designed in KiCad, focused on reliable power distribution, signal integrity, and ease of prototyping.

Benjpp/diy-stream-deck-pcb
PCB for hardware orchestrator from the diy stream deck

BhautikSarvaiya/ESP32_C3_MINI
This project focuses on designing a compact custom PCB based on the ESP32-C3 Mini microcontroller using KiCad 10.0.

d3ckerd/Custom-ESP32
Created a 4 layer custom esp32 dev board using the "ESP32-C3-WROOM-02" module. To learn much about how to create such a module I followed and learned from Pajopcb's youtube tutorials on the esp32.

diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller
Designed a custom ESP32-C3-mini microcontroller development board from schematic capture and footprint creation to final PCB layout and trace routing.
It measures 29.5 × 35.1 mm and has 4 copper layers, 1 mm thick.
35 parts, built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3, USBLC6-2SC6 and PESD5V0L1ULD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the XingdeToo/ESP32-C3-Mini repository on GitHub, at the commit this page was made from: the board is Project1_ESP32Mini.kicad_pcb and its schematic BlockDiagram.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask XingdeToo before reusing the design.