2 layers76.2 × 55.9 mm
4 layers74.1 × 54.9 mm
TS3-Display
XFactHD/TS3-DisplayView users in your channel on an external display
- Size
- 74.1 × 54.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 53
- Pads
- 190
- Tracks, vias
- 332, 42
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Dec 2020
- Updated
- 25 Sep 2021
Overview
TS3-Display is an open-source printed circuit board by XFactHD, from the XFactHD/TS3-Display repository on GitHub, published under the LGPL-3.0 licence. It is a 4-layer board of 74.1 × 54.9 mm with 28 parts on 53 nets, routed with 332 tracks and 42 vias.
It is built around the ATSAMD21G18A-AU, NHD-2.8-240320AF-CSXP-F and SPX3819M5-L-3-3, with the USBLC6-2P6 among its other parts. Its parts include 15 capacitors, 5 ICs, 3 resistors, 2 connectors and 1 switch. It belongs with the lEDs and displays boards and the SAM D and SAM boards of this library.
Main components
4
ATSAMD21G18A-AU
TQFP-48-40℃~+85℃ 1.62V~3.6V 10bit 12bit 256KB 32 Bit 32KB 38 48MHz ARM Cortex-M0+ Built-in FLASH 上电复位(POR)、欠压检测(BOR/LVD/LVR/LVI)、看门狗复位、内置通用定时器、硬件CRC、日历功能、触控功能 TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)NHD-2.8-240320AF-CSXP-F
-2.8 320x240 Parallel、8-Bit/16-Bit(RGB) ST7789Vi - LCD Screen ROHSNewhaven DisplayLCD Screen
SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdTS3-Display
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitors_SMD:C_0805 | C8, C9, C10, C14 |
| 4 | 1u | Capacitors_SMD:C_0805 | C1, C6, C11, C12 |
| 3 | 10u | Capacitors_SMD:C_0805 | C3, C13, C15 |
| 2 | 10k | Resistors_SMD:R_0805 | R2, R3 |
| 2 | 9p | Capacitors_SMD:C_0805 | C4, C5 |
| 1 | 1 | Resistors_SMD:R_0805 | R1 |
| 1 | 100n | Capacitors_SMD:C_0603 | C7 |
| 1 | 10n | Capacitors_SMD:C_0805 | C2 |
| 1 | 10u | Inductors_SMD:L_Taiyo-Yuden_NR-40xx | L1 |
| 1 | 32.768k | Crystals:Crystal_SMD_SeikoEpson_MC146-4pin_6.7x1.5mm | Y1 |
| 1 | ATSAMD21G18A-AU | Housings_DFN_QFN:QFN-48-1EP_7x7mm_Pitch0.5mm | U3 |
| 1 | Conn_01x05 | Connectors_JST:JST_SH_BM05B-SRSS-TB_05x1.00mm_Straight | J1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J2 |
| 1 | NHD-2.8-240320AF-CSXP-F | Custom:NHD-2.8-240320AF-CSXP-F | U4 |
| 1 | PAM2804 | TO_SOT_Packages_SMD:TSOT-23-5 | U5 |
| 1 | SPX3819M5-L-3-3 | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_PTS810 | SW1 |
| 1 | USBLC6-2P6 | TO_SOT_Packages_SMD:SOT-23-6 | U2 |
Similar boards
- 4 layers50 × 19.7 mm
Cloneduino zero
eepj/cloneduino-zero
An Arduino Zero clone in a breadboard-compatible form factor.
34 parts - 4 layers25 × 0.3 mm
- 6 layers76 × 46.4 mm
Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39 - 2 layers18.8 × 51.8 mm
- 2 layers136.1 × 135.4 mm
Minicopter
darshg321/Minicopter
Compact and precise ESP-32 based drone capable of autonomous pathing, built from scratch
57 parts - 2 layers28.3 × 14.3 mm
- 2 layers54.1 × 29.1 mm
Questions
How big is the TS3-Display PCB?
It measures 74.1 × 54.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TS3-Display use?
28 parts, built around the ATSAMD21G18A-AU, NHD-2.8-240320AF-CSXP-F, SPX3819M5-L-3-3 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TS3-Display KiCad files?
From the XFactHD/TS3-Display repository on GitHub, at the commit this page was made from: the board is Hardware/v2/TS3Display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TS3-Display design in my own project?
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).