Skip to the content
2 layers80 × 50 mmSFP Back2Back, the printed circuit board in 3D

Bridges two small Form-factor Pluggable (SFP, Mini-GBIC) Modules together.

Size
80 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
28
Pads
169
Tracks, vias
298, 225
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
19 May 2022
Updated
26 Jun 2022

Overview

SFP Back2Back is an open-source printed circuit board by Westwoodlabs, from the Westwoodlabs/SFP-Back2Back repository on GitHub. It is a 2-layer board of 80 × 50 mm with 42 parts on 28 nets, routed with 298 tracks and 225 vias.

It is built around the LM2576S-3.3 and B340B-13-F(MS). Its parts include 12 capacitors, 11 resistors, 6 connectors, 5 inductors and 2 diodes. It belongs with the interfaces and adapters boards of this library.

Main components

2

README

README.md

SFP Back2Back V2

Bridges two small Form-factor Pluggable (SFP, Mini-GBIC) Modules together. This PCB makes it possible, for example, to switch from multi-mode to single-mode if one side has a built-in multi-mode transceiver, the range can be increased with a single-mode connection.

PCB

Case

Credits

This is a revised version of git.binary-kitchen.de/tom/sfp_back2back, because due to the global chip shortage in 2022 a change of the components was necessary. In this same process, small improvements were also made (Routing, I2C Headers, upgrade to 0805).

Parts

42
QtyValueFootprintReferences
104.7kResistor_SMD:R_0805_2012MetricR201, R202, R203, R204, R205, R301, R302, R303, R304, R305
6100nFCapacitor_SMD:C_0805_2012MetricC202, C203, C205, C302, C303, C305
410uFCapacitor_SMD:C_0805_2012MetricC201, C204, C301, C304
41uHInductor_SMD:L_1008_2520MetricL201, L202, L301, L302
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2, J3
2Housing_PadTestPoint:TestPoint_Pad_D1.0mmN1, N2
2SFPConnector:Connector_SFP_and_CageJ201, J301
11000uFCapacitor_SMD:CP_Elec_8x10.5C102
1100uFCapacitor_SMD:CP_Elec_6.3x7.7C101
1100uHInductor_SMD:L_10.4x10.4_H4.8L101
168RResistor_SMD:R_0805_2012MetricR101
1B340B-13-FDiode_SMD:D_SMBD101
1Barrel_JackConnector_BarrelJack:BarrelJack_HorizontalJ101
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1LEDLED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmD103
1LM2576S-3.3Package_TO_SOT_SMD:TO-263-5_TabPin3U1

The 39 most common of 42 parts.

Similar boards

  • 2 layers57.1 × 57.2 mmMotor control design, the printed circuit board in 3D

    Motor control design

    explosion33/ARES

    SARP Payload ARES 2024-2025

    83 parts1MIT
  • 2 layersHailsatan, the printed circuit board in 3D

    Hailsatan

    ClusterFights/ESP82666SMOKEMETHHAILSATAN

    Six hundred and sixty six ways to win!

    168 parts
  • 2 layers100 × 100 mmPcb a thon, the printed circuit board in 3D

    Pcb a thon

    daniel-3663/pcb-a-thon

    40 parts
  • 4 layers160 × 100 mmMarco ram board, the printed circuit board in 3D

    Marco ram board

    HEAPLab/marco-ram-board

    Hardware design for a STM32F7-based board with lotsa RAM

    210 parts
  • 4 layersPwr v3, the printed circuit board in 3D

    Pwr v3

    LiU-SeeGoals/Electronics

    Schematics etc.

    74 parts
  • 2 layers124.5 × 94 mmWidri, the printed circuit board in 3D

    Widri

    VladislavSavvateev/WiDri-PCB

    28 parts

Questions

How big is the SFP Back2Back PCB?

It measures 80 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SFP Back2Back use?

42 parts, built around the LM2576S-3.3 and B340B-13-F(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SFP Back2Back KiCad files?

From the Westwoodlabs/SFP-Back2Back repository on GitHub, at the commit this page was made from: the board is SFP_Back2Back.kicad_pcb and its schematic SFP_Back2Back.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SFP Back2Back design in my own project?

Its repository states no licence, so its author keeps all rights: ask Westwoodlabs before reusing the design.