Skip to the content
6 layers75 × 50 mmCompute module route 1, the printed circuit board in 3D

Compute module route 1

WesleyVong/oscope

Oscope project for ECE395

Size
75 × 50 mm
Copper layers
6
Thickness
1.54 mm
Parts
191
Nets
291
Pads
1,110
Tracks, vias
3,177, 115
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Dec 2025
Updated
16 Dec 2025

Overview

Compute module route 1 is an open-source printed circuit board by WesleyVong, from the WesleyVong/oscope repository on GitHub. It is a 6-layer board of 75 × 50 mm with 191 parts on 291 nets, routed with 3,177 tracks and 115 vias.

It is built around the 74LVC1G3157, LM66100DCK and M24C64-RDW6TP, with the BSE-040-01-L-D-A among its other parts. Its parts include 113 capacitors, 32 resistors, 11 ICs, 6 connectors and 6 inductors. It belongs with the computers and single-board computers boards and the FPGA and CPLD boards of this library.

Main components

4

Parts

191
QtyValueFootprintReferences
471uFCapacitor_SMD:C_0402_1005MetricC10, C100, C101, C102, C103, C106, C107, C108, C109, C111, C112, C114, C118, C119, C120, C121 +31
2110uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C6, C13, C34, C41, C42, C66, C67, C104, C105, C116, C117 +5
1822uFCapacitor_SMD:C_0603_1608MetricC14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29 +2
134.7kResistor_SMD:R_0402_1005MetricR1, R2, R3, R4, R6, R7, R8, R20, R54, R57, R58, R59, R60
12PadTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12
10100nFCapacitor_SMD:C_0402_1005MetricC47, C48, C64, C65, C68, C69, C70, C71, C75, C110
104.7uFCapacitor_SMD:C_0402_1005MetricC11, C12, C32, C35, C37, C38, C39, C82, C85, C86
6100uFCapacitor_SMD:C_1206_3216MetricC36, C80, C81, C84, C90, C91
656Resistor_SMD:R_Array_Convex_4x0402RN1, RN2, RN3, RN4, RN5, RN6
510kResistor_SMD:R_0402_1005MetricR5, R47, R48, R49, R50
51kResistor_SMD:R_0402_1005MetricR9, R10, R11, R63, R64
40.68uHInductor_SMD:L_1008_2520MetricL1, L2, L5, L6
4LED_SmallLED_SMD:LED_0402_1005MetricD1, D2, D3, D4
2100Resistor_SMD:R_0402_1005MetricR19, R65
22.2uHInductor_SMD:L_1008_2520MetricL3, L4
239Resistor_SMD:R_0402_1005MetricR45, R46
2470Resistor_SMD:R_0402_1005MetricR55, R56
274LVC1G3157Package_TO_SOT_SMD:SOT-363_SC-70-6U10, U11
2BSE-040-01-L-D-Aoscope:SAMTEC_BSE-040-01-X-D-AJ1, J2
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5, J6
2LM66100DCKPackage_TO_SOT_SMD:SOT-363_SC-70-6U8, U9
110nFCapacitor_SMD:C_0402_1005MetricC72
1150kResistor_SMD:R_0402_1005MetricR62
11MResistor_SMD:R_0402_1005MetricR61
1240Resistor_SMD:R_0402_1005MetricR44
1AK2ADDF1-200.0000Toscope:Oscillator_SMD_Abracon_AK2-6Pin_2.5x2.0mmU7
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_02x07_Counter_ClockwiseConnector_Molex_Milligrid:Molex_8783214xx_2x07_P2.0mm_Header_Vertical_Polarized_MountingPegsJ4
1M24C64-RDWPackage_SO:TSSOP-8_4.4x3mm_P0.65mmU3
1MT25QLxxxxxx1ESEPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU4
1MT41K256M16TWPackage_BGA:Micron_FBGA-96_8x14mm_Layout9x16_P0.8mmU2
1STPMIC25oscope:VQFN-56L_6.5x6.5mm_P0.4mm_EP4.5x4.5mmU1
1SW_SPSTButton_Switch_SMD:SW_SPST_B3U-1000PSW1
1TPS25925xPackage_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalViasU6
1xc7s50csga324oscope:XC7S50-xCSGA324U5

More from WesleyVong/oscope

2
  • 4 layers100 × 90 mmCarrier, the printed circuit board in 3D

    Carrier

    WesleyVong/oscope

    Oscope project for ECE395

    59 parts
  • 2 layers43.2 × 38.1 mmStpmic, the printed circuit board in 3D

    Stpmic

    WesleyVong/oscope

    Oscope project for ECE395

    34 parts

Similar boards

  • 2 layers60 × 60 mmTANUKICHI 2021-PCB, the printed circuit board in 3D

    TANUKICHI 2021-PCB

    yutatech/TANUKICHI_2021-PCB

    This PCB is developed for RoboCup Junior Soccer

    83 parts5MIT
  • 4 layers94.3 × 81.8 mmYukaLink revA, the printed circuit board in 3D

    YukaLink revA

    Misaka0x2730/YukaLink

    Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.

    321 parts3GPL-3.0
  • 2 layers70.7 × 53.3 mmGladiolus, the printed circuit board in 3D

    Gladiolus

    greatfet-hardware/gladiolus

    a Software Defined Infrared (SDIR) neighbor

    159 parts19
  • 4 layers82.8 × 53.3 mmFoxglove, the printed circuit board in 3D

    Foxglove

    greatfet-hardware/foxglove

    an advanced level shifting neighbor

    177 parts13BSD-3-Clause
  • 4 layers100 × 123 mmDuet3 5+ Ethernet, the printed circuit board in 3D

    Duet3 5+ Ethernet

    Duet3D/Duet3-Mini5plus

    This repository also contains information in the Mini 2+ : a two driver expansion board for the Duet 3 mini 5+

    461 parts12
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers70.6 × 53.3 mmJasmine, the printed circuit board in 3D

    Jasmine

    greatfet-hardware/jasmine

    a lithium polymer battery charging neighbor

    93 parts4BSD-3-Clause
  • 2 layers58.9 × 40.9 mmGlitchBob LPC, the printed circuit board in 3D

    GlitchBob LPC

    parasyte/GlitchBob-LPC

    Voltage glitching automation tool to break protection on NXP LPC microcontrollers.

    12 parts4MIT

Questions

How big is the Compute module route 1 PCB?

It measures 75 × 50 mm and has 6 copper layers, 1.54 mm thick.

What parts does the Compute module route 1 use?

191 parts, built around the 74LVC1G3157, LM66100DCK, M24C64-RDW6TP and BSE-040-01-L-D-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Compute module route 1 KiCad files?

From the WesleyVong/oscope repository on GitHub, at the commit this page was made from: the board is hw/compute_module/compute_module/compute_module_route_1.kicad_pcb and its schematic hw/carrier/carrier/carrier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Compute module route 1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask WesleyVong before reusing the design.