Skip to the content
2 layers38 × 8 mmMws2812, the printed circuit board in 3D

allow V7B or MPRO screen driver board control WS2812B by I2C interface + CH32V003

Size
38 × 8 mm
Copper layers
2
Thickness
1 mm
Parts
15
Nets
20
Pads
42
Tracks, vias
68, 5
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Dec 2023
Updated
19 Nov 2025

Overview

Mws2812 is an open-source printed circuit board by Vonger, from the Vonger/V7B_WS2812B repository on GitHub. It is a 2-layer board of 38 × 8 mm with 15 parts on 20 nets, routed with 68 tracks and 5 vias.

It is built around the CH32V003F4U6. Its parts include 13 connectors, 1 capacitor and 1 IC. It belongs with the RISC-V boards of this library.

Main components

1

README

README.md

Compile Firmware

  1. download wch riscv toolchain from its offical site(http://www.mounriver.com/download, select Linux).
  2. call make to compile the firmware.
  3. call make flash to upload firmware to device.(hardware requires WCH-LinkE, PD1 to SWDIO)
  4. call make test to create the local test application.
  5. run test, check result on dashboard.

note: IS31FL3731 compatible mode register address only use 1bytes, so max supported LEDs are 72 RGB LEDs(or 216 single color LEDs). Not compatible mode has two bytes for address, so max supported LEDs are 512 RGB LEDs or more(depends on the memory to buffer the LED data)

  • ws2812b.is31.bin: this is compatible IS31FL3731 firmware.
  • ws2812b.full.bin: this is not compatible but can use all ws2812b in line firmware.

Link

  • Compile in Ubuntu 22.04
  • WCH CH32V003 RISCV toolchain: http://www.mounriver.com/download => Linux => MRS_Toolchain_Linux_x64_VX.XX.tar.xz
  • install libjlink0 for openocd(sudo apt install libjlink0).

Parts

15
QtyValueFootprintReferences
5Conn_01x01_SocketVoCore:TestPoint_Pad_D1.0mmJ9, J10, J11, J12, J13
3Conn_01x01VoCore:TestPoint_Hole_5.0x2.5mmJ6, J7, J8
3Conn_01x01VoCore:TestPoint_Pad_3.0x2.0mmJ3, J4, J5
1100nFVoCore:0402CC1
1CH32V003F4U6VoCore:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mmU3
1Conn_01x01VoCore:TestPoint_Hole_4.0x2.0mmJ1
1Conn_01x03_SocketConnector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ2

Similar boards

  • 2 layers45 × 25 mmEasy PD Sink, the printed circuit board in 3D

    Easy PD Sink

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    41 parts599
  • 2 layers11.8 × 12.2 mmMicrolcd-3digit, the printed circuit board in 3D

    Microlcd-3digit

    cnlohr/ch32v003_3digit_lcd_usb

    ch32v003 USB Driver for 3-digit 7-segment TN LCDs with touch

    10 parts222MIT
  • 2 layers82 × 82 mmBack, the printed circuit board in 3D

    Back

    johanwheeler/ch32-fireplace

    Ch32 based christmas card with 8x8 screen, sound and capacitive buttons

    150 parts33MIT
  • 4 layers27.9 × 108 mmCheep3a, the printed circuit board in 3D

    Cheep3a

    emeb/cheep3a

    An inexpensive Eurorack audio generator

    85 parts9MIT
  • 2 layers29.3 × 73 mmGamepad pmod, the printed circuit board in 3D

    Gamepad pmod

    psychogenic/gamepad-pmod

    CH32V003-based 2xSNES controller interface PMOD

    93 parts7GPL-3.0
  • 4 layers144 × 150 mmKepler x, the printed circuit board in 3D

    Kepler x

    kunichiko/X68k-KeplerX-PCB

    186 parts4MIT
  • 2 layers180 × 131.1 mmCCController, the printed circuit board in 3D

    CCController

    RainbowLabsDE/LightInstallationController

    PCB and Firmware of our first universal RGB light installation controller.

    92 parts4MIT
  • 2 layers90.4 × 114 mmHh2024, the printed circuit board in 3D

    Hh2024

    badgeteam/hackerhotel-2024-hardware

    Conference badge for Hackerhotel 2024

    119 parts3CERN-OHL-P-2.0

Questions

How big is the Mws2812 PCB?

It measures 38 × 8 mm and has 2 copper layers, 1 mm thick.

What parts does the Mws2812 use?

15 parts, built around the CH32V003F4U6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mws2812 KiCad files?

From the Vonger/V7B_WS2812B repository on GitHub, at the commit this page was made from: the board is mws2812/mws2812.kicad_pcb and its schematic mws2812/mws2812.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mws2812 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Vonger before reusing the design.