
CAN DISPLAY
VladxIL/NMEA2000_0183_Display
Display NMEA2000 and NMEA0183 on DWIN 7" Display

Display NMEA2000 and NMEA0183 on DWIN 7" Display
LED Matrix Display is an open-source printed circuit board by VladxIL, from the VladxIL/NMEA2000_0183_Display repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 157.5 × 121.8 mm with 803 parts on 36 nets, routed with 6,361 tracks and 852 vias.
It is built around the BME280, TSL2561T and AMS1117-3.3, with the WS2812B and BAT54S among its other parts. Its parts include 398 capacitors, 387 diodes, 6 resistors, 5 connectors and 3 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Display NMEA2000 and NMEA0183 on DWIN 7" Display
| Qty | Value | Footprint | References |
|---|---|---|---|
| 384 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115 +368 |
| 384 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113 +368 |
| 9 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5, C6, C8, C9, C13, C14, C15 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C10 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 47u 16V | Capacitor_SMD:CP_Elec_5x5.8 | C12, C16 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 27K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 47u 6V3 | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | ESP32-WROOM-E | PCM_Espressif:ESP32-WROOM-32E | U1 |
| 1 | I2C Sensor 1 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J1 |
| 1 | IN | Connector_Molex:Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | J4 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | MINI560 | 1Display:Mini560_DC_StepDown | J7 |
| 1 | OUT | Connector_Molex:Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | J6 |
| 1 | Prodrammer | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J2 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | SELF HARD RESET | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | SW_Reed | Button_Switch_SMD:SW_SPST_REED_CT05-XXXX-J1 | SW3 |
| 1 | TSL2561 | 1Display:TSL2561 | LED1 |

VladxIL/NMEA2000_0183_Display
Display NMEA2000 and NMEA0183 on DWIN 7" Display

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

dileepvr/sensorbrd
KiCAD PCB design files for an external sensor board for the payload on a nearspace weather balloon.

CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form

dharaneesh-m-oss/lorawatch_pcb
Compact LoRa-based Wearable IoT PCB using ESP32 with GPS, MPU6050, BME280, USB-C charging, and battery management designed in KiCad.

ficosta/Guardian-Sense
Guardian-Sense is a versatile hardware project based on the ESP32-S3, designed to monitor environmental conditions and provide real-time data to Zabbix.


BioMEMS/OpenDMS
Hardware developed in Prof. Cristina Davis' Bioinstrumentation and BioMEMS laboratory. Publications (i.e. articles, book chapters, etc.) that use this hardware are required to cite the related article…

lab11/signpost
Exploring what happens when you put computers on sign posts.
It measures 157.5 × 121.8 mm and has 4 copper layers, 1.6 mm thick.
803 parts, built around the BME280, TSL2561T, AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VladxIL/NMEA2000_0183_Display repository on GitHub, at the commit this page was made from: the board is LED Matrix Display/LED Matrix Display.kicad_pcb and its schematic CAN_DISPLAY/CAN_DISPLAY.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).