Skip to the content
2 layers100 × 120 mmKeyboardey, the printed circuit board in 3D

A weird keyboard!

Size
100 × 120 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
41
Pads
190
Tracks, vias
291, 39
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Oct 2026
Updated
25 Oct 2026

Overview

Keyboardey is an open-source printed circuit board by ViratS-best, from the ViratS-best/Keyboardey repository on GitHub. It is a 2-layer board of 100 × 120 mm with 42 parts on 41 nets, routed with 291 tracks and 39 vias.

It is built around the CH552T. Its parts include 18 switches, 17 diodes, 3 resistors, 2 capacitors and 1 IC. It belongs with the keyboards and input boards and the 8051 (CH55x, STC, AT89) boards of this library.

Main components

1

README

README.md

Link: https://cad.onshape.com/documents/37fd5a85f79ebe20a6029276/w/db3c2ffc712adf7ef06de7c5/e/88f673a97a289337726580ef?renderMode=0&uiState=6ad8d7fe5b5abcf9bb015cb8

Keyboardey

A weird keyboard CAD & Hardware design created for Half-Life. View PCB on KiCanvas

Overview

Keyboardey is a weird, funky, custom-designed keypad layout built entirely from scratch. This project was my second time ever using CAD, making it quite a large learning curve in learning how to design mechanical parts, shape custom keys, etc. I also designed a PCB to go along with this project!

Cad

image

I also had to create a custom cutout extrude to position keys correctly!

image

PCB and Case on Onshape (This was when I didn't know that I would actually have to change key chapes, and cutout shape): image

Project Structure

text
|── README.md
|── KEYBOARDEY.kicad__pcb
|── KEYBOARDEY.kicad__prl
|── KEYBOARDEY.kicad__pro
|── KEYBOARDEY.kicad__sch
|── Keyboardey.step

PCB

I decided to not use a module microcontroller but rather build one myself: image

Then I added the keyboard matrix:

image

Finished MCU schematic: image

Routing & Placement: image

BoM

Component / ServiceDescriptionCost
PCB & AssemblyManufactured and assembled via JLCPCB$96.24
ShippingShipping and handling$18.34
3D PrintingCase and custom keycaps (estimated)~$10.00
Total Estimated Cost~$124.58

Parts

42
QtyValueFootprintReferences
17DDiode_SMD:D_SOD-123D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D15, D16, D17 +1
17SW_PushHackclub Footprints:Kailh Choc Low-Profile SwitchesSW2, SW3, SW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +1
20.1uCapacitor_SMD:C_0402_1005MetricC1, C2
25.1kResistor_SMD:R_0402_1005MetricR1, R2
110kResistor_SMD:R_0402_1005MetricR3
1CH552TPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1
1SW_PushButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 2 layers98.5 × 45.4 mmIdawgz32, the printed circuit board in 3D

    Idawgz32

    ChrisChrisLoLo/idawgz32

    A full 32 key mechanical keyboard that can be made for only $5

    81 parts77GPL-3.0
  • 2 layers58.3 × 98.2 mmSandKrux, the printed circuit board in 3D

    SandKrux

    sandman21vs/SandKrux

    Placa de desenvolvimento baseada no chip K210, com entradas para touch, câmera e LCD grande, criada especificamente para rodar o firmware Krux.

    176 parts21
  • 2 layers230.6 × 109.5 mmCh55p34, the printed circuit board in 3D

    Ch55p34

    doesntfazer/Ch55p34-keyboard

    34 key unibody keyboard based on CH552t

    79 parts14GPL-3.0
  • 2 layers149.2 × 82.5 mm0xPM, the printed circuit board in 3D

    0xPM

    llmerlos/0xPM

    PICCTRL 0xPM - 6x3+4 Split Keyboard with onboard CH552

    65 parts11CERN-OHL-P-2.0
  • 2 layers94.9 × 76 mmToadsTempest, the printed circuit board in 3D

    ToadsTempest

    tikinson/ToadsTempest

    Super small custom 42-keys column-staggered ergonomic mechanical keyboard powered by CH552T microcontroller, created for pocket keyboard design contest #00

    113 parts11CC0-1.0
  • 2 layers86.8 × 90.1 mmPlasticFrog, the printed circuit board in 3D

    PlasticFrog

    wrickert/CH552

    Repo for storing boards and code for the CH552 uC

    243 parts10
  • 2 layers35 × 20 mmSimpleJtag, the printed circuit board in 3D

    SimpleJtag

    rabid-inventor/SimpleUSBJTAG

    A simple USB to jtag board based on the CH552 MCU running code from Diodep https://github.com/diodep/ch55x_jtag

    25 parts7MIT
  • 2 layers190.8 × 61.7 mmWahoo30, the printed circuit board in 3D

    Wahoo30

    rqcoon/wahoo30

    30% Keyboard based on the CH552T microcontroller using FAK firmware

    79 parts4GPL-3.0

Questions

How big is the Keyboardey PCB?

It measures 100 × 120 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboardey use?

42 parts, built around the CH552T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboardey KiCad files?

From the ViratS-best/Keyboardey repository on GitHub, at the commit this page was made from: the board is KEYBOARDEY.kicad_pcb and its schematic KEYBOARDEY.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboardey design in my own project?

Its repository states no licence, so its author keeps all rights: ask ViratS-best before reusing the design.