2 layers98.5 × 45.4 mm
Idawgz32
ChrisChrisLoLo/idawgz32
A full 32 key mechanical keyboard that can be made for only $5
81 parts77GPL-3.0
2 layers35 × 20 mm
SimpleJtag
rabid-inventor/SimpleUSBJTAG7A simple USB to jtag board based on the CH552 MCU running code from Diodep https://github.com/diodep/ch55x_jtag
- Size
- 35 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 22
- Pads
- 93
- Tracks, vias
- 240, 37
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Feb 2020
- Updated
- 27 Feb 2020
Overview
SimpleJtag is an open-source printed circuit board by rabid-inventor, from the rabid-inventor/SimpleUSBJTAG repository on GitHub, published under the MIT licence. It is a 2-layer board of 35 × 20 mm with 25 parts on 22 nets, routed with 240 tracks and 37 vias.
It is built around the CH552T. Its parts include 9 capacitors, 4 resistors, 2 ICs, 2 diodes and 2 connectors. It belongs with the 8051 (CH55x, STC, AT89) boards of this library.
Main components
1README
README.mdSimpleUSBJTAG
A simple USB to jtag board based on the CH552 MCU running code from Diodep https://github.com/diodep/ch55x_jtag
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C7 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C6 |
| 2 | 22pf | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 330R | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 56K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AP7333-33SRG-7 | TO_SOT_Packages_SMD:SOT-23 | U1 |
| 1 | CH552T | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U2 |
| 1 | Conn_02x05_Odd_Even | Connectors_Multicomp:Multicomp_MC9A22-1034_2x05x2.54mm_Angled | J1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Jumper_NC_Dual | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LOGO | silks:back | G*** |
| 1 | LOGO | silks:front | G*** |
| 1 | Polyfuse_Small | Capacitor_SMD:C_1210_3225Metric | F1 |
| 1 | RESET | TestPoint:TestPoint_Pad_D2.5mm | TP1 |
| 1 | R_Small | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | USB_C_Plug | footprint:usbc_16pos_lugged_allsmt | P1 |
Similar boards
- 2 layers58.3 × 98.2 mm
SandKrux
sandman21vs/SandKrux
Placa de desenvolvimento baseada no chip K210, com entradas para touch, câmera e LCD grande, criada especificamente para rodar o firmware Krux.
176 parts21 - 2 layers230.6 × 109.5 mm
- 2 layers149.2 × 82.5 mm
- 2 layers94.9 × 76 mm
ToadsTempest
tikinson/ToadsTempest
Super small custom 42-keys column-staggered ergonomic mechanical keyboard powered by CH552T microcontroller, created for pocket keyboard design contest #00
113 parts11CC0-1.0 - 2 layers86.8 × 90.1 mm
- 2 layers190.8 × 61.7 mm
Wahoo30
rqcoon/wahoo30
30% Keyboard based on the CH552T microcontroller using FAK firmware
79 parts4GPL-3.0 - 2 layers32.5 × 15.7 mm
Development board ch552
ricelectric/development-board-ch552
This is a cheap and small Arduino compatible board.
10 parts2MIT
Questions
How big is the SimpleJtag PCB?
It measures 35 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SimpleJtag use?
25 parts, built around the CH552T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SimpleJtag KiCad files?
From the rabid-inventor/SimpleUSBJTAG repository on GitHub, at the commit this page was made from: the board is simpleJtag/simpleJtag.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SimpleJtag design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).