

Mems lora
- Size
- 71 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 72
- Pads
- 172
- Tracks, vias
- 342, 32
- Pours
- 172
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Mar 2023
- Updated
- 30 Jan 2024
Overview
Mems lora is an open-source printed circuit board by VibrasticLab, from the VibrasticLab/wesel_monitoring repository on GitHub. It is a 2-layer board of 71 × 37 mm with 39 parts on 72 nets, routed with 342 tracks and 32 vias.
It is built around the AMS1117-3.3. Its parts include 13 capacitors, 6 resistors, 4 ICs, 4 diodes and 4 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
1Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C6, C8, C10, C12 |
| 4 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C7, C9, C13 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3 |
| 3 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | RED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3, D4 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 100uF | Capacitor_SMD:C_Elec_3x5.4 | C11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Ai-Thinker-Ra-02 | RF_Module:Ai-Thinker-Ra-01-LoRa | U4 |
| 1 | BLUE | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | D | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
| 1 | STM32F103RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | TE-830M1-0025 | Package_PLLC:TE-830M1 | U2 |
More from VibrasticLab/wesel_monitoring
1- 2 layers69.9 × 31.5 mm

Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Mems lora PCB?
It measures 71 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mems lora use?
39 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mems lora KiCad files?
From the VibrasticLab/wesel_monitoring repository on GitHub, at the commit this page was made from: the board is circuit/mems_lora/mems_lora.kicad_pcb and its schematic circuit/mems_lora/mems_lora.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mems lora design in my own project?
Its repository states no licence, so its author keeps all rights: ask VibrasticLab before reusing the design.