

- Size
- 100 × 90.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 24
- Pads
- 145
- Tracks, vias
- 98, 33
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Aug 2025
- Updated
- 6 Oct 2025
Overview
Science PSU PCB is an open-source printed circuit board by University-of-Melbourne-Rover-Team, from the University-of-Melbourne-Rover-Team/Science-Processing-PSU-PCB repository on GitHub. It is a 2-layer board of 100 × 90.8 mm with 43 parts on 24 nets, routed with 98 tracks and 33 vias.
It is built around the TPSM53604RDA, I6A24014A033V-001-R and BTS50010-1TAE, with the XT60-M, MMBT3904 and MMBT3906 among its other parts. Its parts include 13 resistors, 11 capacitors, 9 connectors, 3 ICs and 2 transistors. It belongs with the power boards of this library.
Main components
6TPSM53604RDA
DFN143.8V to 36V Input, 1V to 7V Output, 4A Power Module in Enhanced HotRod™Texas InstrumentsUncategorisedI6A24014A033V-001-R
插件-40℃~+125℃ 12.1mm 14A 2000uF 20mVp-p 22.9mm 3.3V~24V 33mm 400kHz 92.5%、98% 9V~40V Over-temperature protection、Over Current Protection、Programmable output voltage、Power-on timing control、Remote sampling compensation、External clock synchronization Step-down type ±4% Plugin DC-DC Power Modules ROHSTDKDC-DC Power ModulesBTS50010-1TAE
TO-263-6TO-263-6 Power Distribution Switches ROHSInfineon TechnologiesPower Distribution SwitchesXT60-M
THrough holeTHroughhole New Arrivals ROHSChangzhou Amass ElecUncategorisedMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)MMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdScience-Processing-PSU-PCB
PCB for the power supply of the science processing.
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R12 |
| 4 | XT60-M | Connector_AMASS:AMASS_XT60IPW-M_1x03_P7.20mm_Horizontal | J1, J4, J5, J6 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_8x10 | C1, C3 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C11 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C8 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R14 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R15 |
| 2 | 47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C10 |
| 2 | BTS50010-1TAE | BTS50010-1TAE:BTS50010-1TAE | U1, U2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J8, J9 |
| 1 | 1.4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 2.49k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 22uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C4 |
| 1 | 330uF | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C6 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal | J7 |
| 1 | ESTOP | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J2 |
| 1 | I6A24014A033V-001-R | I6A24014A033V-001-R:I6A24014A033V-001-R | PS1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | ON | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J3 |
| 1 | TPSM53604RDA | Package_DFN_QFN:Texas_B3QFN-14-1EP_5x5.5mm_P0.65mm_ThermalVia | U3 |
The 39 most common of 43 parts.
Similar boards
- 4 layers86 × 99 mm

- 2 layers100 × 80 mm

Power Board
Ensmasteel/Robot-2022-2023
Repository for ENSMASTEEL's 2022-2023 robot which will take part in the 2023 Coupe de France de Robotique
39 parts2 - 4 layers40 × 40 mm

- 2 layers65 × 65 mm

- 6 layers95 × 73 mm

- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers68.8 × 53.6 mm

Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 4 layers304.8 × 330.2 mm

Questions
How big is the Science PSU PCB PCB?
It measures 100 × 90.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Science PSU PCB use?
43 parts, built around the TPSM53604RDA, I6A24014A033V-001-R, BTS50010-1TAE and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Science PSU PCB KiCad files?
From the University-of-Melbourne-Rover-Team/Science-Processing-PSU-PCB repository on GitHub, at the commit this page was made from: the board is Science-PSU-PCB.kicad_pcb and its schematic Science-PSU-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Science PSU PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask University-of-Melbourne-Rover-Team before reusing the design.