
Controller
Angelo13C/3d-printer
Firmware, electronics, mechanics and control interface of a 3D printer

https://unimakers.fr/CDR2027-Legend/
Pcb pami is an open-source printed circuit board by Unimakers, from the Unimakers/CDR2027-Legend repository on GitHub. It is a 4-layer board of 90 × 66 mm with 78 parts on 89 nets, routed with 41 tracks and 53 vias.
It is built around the TMC2209SILENTSTEPSTICK, ESP32-S3-WROOM-1-N8 and WS2812B. Its parts include 25 connectors, 16 capacitors, 13 resistors, 9 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Création d'un PCB pour la robotique.
Carte électronique ESP32-S3-WROOM-U1 permettant :
fw/include/pamiboard.h)Alimentation possible via PowerBank avec 5V/3A vers la carte en Type-C vers Type-C et/ou batterie LiPo 12V (20V max, si pas driver DC soudé 28V max)
Micro ordinateur utilisant un noyau Linux capable d'executer du Python cadencé à 1.2Ghz. Afin de décharger l'ESP32-S3 des calculs lourds (path finding, trajctory planner, etc). Il se fixe en direct sur le PCB, se reliant ainsi en UART1 avec l'ESP32 permettant la communication.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C16, C17, C18, C19, C20, C21 |
| 5 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J7, J9, J12, J27 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8, J23, J26, UART0 |
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14, J22, MPU1, UART1 |
| 4 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J11, J16, J21, VL0 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R10, R13 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C9 |
| 3 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J6, J10, J15 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | PMOS | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | AO4407A1, AO4407A2, AO4407A4 |
| 2 | 100u | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C4, C6 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | Conn_01x11_Socket | Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical | J2, J4 |
| 2 | LTC4412xS6 | Package_TO_SOT_SMD:TSOT-23-6 | U2, U3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 2 | TMC2209_SILENTSTEPSTICK | TMC2209:MODULE_TMC2209_SILENTSTEPSTICK | U8, U9 |
| 2 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U5 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 270k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 470u | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C11 |
| 1 | AMS1117-3.3 (UMW) | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J17 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1U | U6 |
| 1 | G*** | kibuzzard-6A6F48EA | kibuzzard-6A6F48EA |
| 1 | MCP23008-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U10 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D6 |
| 1 | ~ | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |

Angelo13C/3d-printer
Firmware, electronics, mechanics and control interface of a 3D printer

TiTooom/Global_ESP32S3_PCB
Carte électronique ESP32-S3-WROOM-U1 permettant de controller : - Jusqu'à 3 NEMA 17 - 3 Capteurs TOF VL53L0X (i2c) - 1 écran OLED 0.96 12864 (i2c) - Buzzer - LiDAR

UniDiggers/PCBete
Carte électronique ESP32-S3-WROOM-U1 permettant de controller : - Jusqu'à 3 NEMA 17 - 3 Capteurs TOF VL53L0X (i2c) - 1 écran OLED 0.96 12864 (i2c) - Buzzer - LiDAR


LesKaribous/Karibous-2026-PAMI-Ninja
PAMI Ninja - Coupe de France de robotique 2026

DhamuVkl/ESP32S3-AI-Voice-Assistant
This project is a complete DIY AI voice assistant built around the ESP32-S3 microcontroller. It combines custom PCB design, advanced audio processing, and cloud-based AI to create a device that rivals commercial smart…

Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.

RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
It measures 90 × 66 mm and has 4 copper layers, 1.6 mm thick.
78 parts, built around the TMC2209SILENTSTEPSTICK, ESP32-S3-WROOM-1-N8 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Unimakers/CDR2027-Legend repository on GitHub, at the commit this page was made from: the board is ecad/pcb-pami/pcb-pami.kicad_pcb and its schematic ecad/pcb-pami/pcb-pami.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Unimakers before reusing the design.