
CW312T AURIX TC233
jmercerr/CW312T-AURIX-TC233
design transfer project from cw308t to cw312t form for AURIX-TC233 target board

Breakout board for F-3188 V2.0 bluetooth board with single ended output signal and onboard power supply.
Breakoutboard is an open-source printed circuit board by Ufbuc, from the Ufbuc/CSR8645-bluetooth-receiver-board repository on GitHub. It is a 2-layer board of 43 × 64 mm with 43 parts on 69 nets, routed with 318 tracks and 25 vias.
It is built around the LD1117SC-R and BC817. Its parts include 19 resistors, 8 capacitors, 8 connectors, 3 ICs and 1 transistor. It belongs with the microcontroller boards boards of this library.
Breakout board for F-3188 V2.0 bluetooth board with single ended output signal and onboard power supply.

This is a simple circuit board (43mm x 64mm) to make use of the features of the very common F-3188 V2.0 which is based on the Qualcomm CSR8645. Simply connect power (5V via USB Type B or up to 15V via pin header) and 3.5mm phone connector to get an audio signal in aptX quality.
Pin headers can be used to connect status LEDs and control buttons. Many features can be customized by connecting a supported programmer. A MAX97220 board converts the differential ended signal from the CSR8645 to a single ended signal. The onboard power supply uses a LD1117 SC-R to provide a stable input voltage (3.5-3.6V) for both mounted PCBs.
The output level is high enough to drive a dedicated amplifier. If the board is used to directly drive headphones it may be better to skip the onboard power supply and use 5V input voltage as input voltage for the MAX97220.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R18, R19 |
| 6 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R12, R13, R14, R15, R16 |
| 4 | 1µ | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C6, C7, C8 |
| 3 | 10µ | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C3, C9 |
| 3 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7, R8 |
| 1 | 100µ | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | AudioJack3_SwitchTR | Connector_Audio:Jack_3.5mm_Ledino_KB3SPRS_Horizontal | J7 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CSR8645 | bluetooth:F-3188_CSR8645 | U2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | LD1117SC-R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MAX97220_Amp | bluetooth:MAX97220_amp | U3 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J3 |
The 39 most common of 43 parts.

jmercerr/CW312T-AURIX-TC233
design transfer project from cw308t to cw312t form for AURIX-TC233 target board

W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino


BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.


It measures 43 × 64 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the LD1117SC-R and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ufbuc/CSR8645-bluetooth-receiver-board repository on GitHub, at the commit this page was made from: the board is kicad/Breakoutboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ufbuc before reusing the design.