

SimpleMotor
- Size
- 38.4 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 42
- Pads
- 110
- Tracks, vias
- 357, 13
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Jul 2019
- Updated
- 13 Dec 2021
Overview
SimpleMotor is an open-source printed circuit board by UWRoverTeam, from the UWRoverTeam/low_level repository on GitHub. It is a 2-layer board of 38.4 × 63 mm with 21 parts on 42 nets, routed with 357 tracks and 13 vias.
It is built around the SN65HVD231D. Its parts include 10 connectors, 3 resistors, 3 ICs and 3 diodes.
Main components
1README
README.mdlow_level
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 1 | BATTERY_IN | XT:XT30_vertical | J9 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | BOTLAND_MOTOR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | CAN1 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J2 |
| 1 | CAN2 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J5 |
| 1 | CAP+ | Connector_Wire:SolderWirePad_1x01_Drill1.2mm | J8 |
| 1 | CAP- | Connector_Wire:SolderWirePad_1x01_Drill1.2mm | J7 |
| 1 | ENCODER | Connector_JST:JST_PH_S7B-PH-SM4-TB_1x07-1MP_P2.00mm_Horizontal | J4 |
| 1 | MOTOR_OUT | XT:XT30_vertical | J10 |
| 1 | NUCLEO-L432KC | STM32:NUCLEO-L432KC | U1 |
| 1 | POLOLU_POW | pololu:Pin_Header_Pololu_OUT | J6 |
| 1 | POLOLU_SIG | pololu:Pin_Header_Straight_1x08_Pitch2.54mm | J3 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SN65HVD231 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | step_down_mp1584 | d-sun:mp1584 | U3 |
The 19 most common of 21 parts.
More from UWRoverTeam/low_level
1- 2 layers59 × 40 mm

Similar boards
- 2 layers40 × 53.6 mm

- 2 layers93.5 × 53 mm

- 2 layers43 × 108 mm

Bird3Controller
ysoyjcgoxohxoh/Bird3
Drop-in replacement Bird Brain design for Bird 3 scooters.
69 parts8MIT - 2 layers50 × 50 mm

Bobbycar lora can ethernet
bobbycar-graz/Telemetry-PCB
PCB with ESP32, CANbus, microSD, GPS and LoRa
53 parts7 - 4 layers74 × 28 mm

- 2 layers93.5 × 53 mm

- 2 layers25.4 × 41.8 mm

- 2 layers48.6 × 49.5 mm

Reaction wheel bldc motor control pcb
vatsalbansal123/reaction-wheel-controller-pcb
Open-source FOC motor controller PCB for a reaction wheel — STM32G431 + DRV8311H driving a BLDC motor, with CAN bus interface. Designed in KiCad.
50 parts3
Questions
How big is the SimpleMotor PCB?
It measures 38.4 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SimpleMotor use?
21 parts, built around the SN65HVD231D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SimpleMotor KiCad files?
From the UWRoverTeam/low_level repository on GitHub, at the commit this page was made from: the board is simpleMotor/simpleMotor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SimpleMotor design in my own project?
Its repository states no licence, so its author keeps all rights: ask UWRoverTeam before reusing the design.