Skip to the content
2 layersOvenControl, the printed circuit board in 3D

Circuit diagram, Arduino code, etc. related to the Prepreg Oven Project

Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
55
Pads
88
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
28 Aug 2020
Updated
14 Apr 2022

Overview

OvenControl is an open-source printed circuit board by UVicRocketry, from the UVicRocketry/Prepreg-Oven repository on GitHub. It is a 2-layer board with 18 parts on 55 nets.

Its parts include 14 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

ThePrepregOvenProject

Circuit diagram, Arduino code, etc. related to the Prepreg Oven Project: Uvic Rocketry's custom composite curing oven!

The PPO is capable of reading custom temperature profiles from an SD card. Users can load up to 999 profiles with up to 20 target tempertures. Temperature values are linearly interpolated automatically.

Interface

The oven has 2 buttons for controlling various functions:

SELECT Used for scrolling through temperature profiles.

START/STOP Confirms temperature profile and starts the oven. Long press to force shut down oven mid cycle. Long press again to reboot the oven.

Starting the Oven

Upon first power, or after rebooting, the oven displays the profile selection screen.

Pressing the SELECT button scrolls through the temperature profiles stored on the SD card. The numerical name of the file is displayed, and a short description of the profile appears below.

Once the desired profile is displayed, press START to begin the profile.

Creating Temperature Profiles

Temperature profiles can be loaded on the SD card for custom cycles.

The format for a profile is a single line in the file as follows:

  • Numerical filenames starting at 0. No file extension.
  • Exactly 14 alphnumeric characters describing the profile. Pad with spaces if needed. Terminate with a ,.
  • Up to 40 , seperated non negative integer values alternating between temperature in C and time between temperatures in seconds. The maximum value of a time number is 65535 (~18h in seconds), and maximum temperature value is 200.

For example, a profile called 0 containing the single line of text: Sample ,20,1800,50,5400,50,1800,80,7200,80,1800,120,1800,120,3600,20 produces the cycle in the image below.

Sample Profile

Parts

18
QtyValueFootprintReferences
3Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ3, J4, J5
2ADAFRUIT_AD8495OvenControl_custom_parts:thermoucouple_AD8495U1, U2
2Conn_01x02_FemaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6, J9
2Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ11, J13
2Conn_01x04_FemaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7, J8
2Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ12, J15
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Conn_01x03_FemaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ10
1Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ14
1LCD_SCREENOvenControl_custom_parts:LCD_SCREENU3
1Screw_Terminal_01x06TerminalBlock:TerminalBlock_bornier-6_P5.08mmJ1

Similar boards

  • 2 layers27.9 × 16.5 mmPowerSSO-24 breakout, the printed circuit board in 3D

    PowerSSO-24 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    18 parts1.2k
  • 2 layers42.7 × 13.7 mmStm32-mini12864, the printed circuit board in 3D

    Stm32-mini12864

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    18 parts1.1kGPL-3.0
  • 2 layers41.2 × 46.6 mmThumb cluster left, the printed circuit board in 3D

    Thumb cluster left

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    18 parts993
  • 2 layers44 × 51.3 mm4272MAVcoder R4, the printed circuit board in 3D

    4272MAVcoder R4

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    18 parts915
  • 2 layers28.3 × 14.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    18 parts716GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 stepper driver, the printed circuit board in 3D

    L0 stepper driver

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    18 parts546MIT
  • 2 layersMooltipass, the printed circuit board in 3D

    Mooltipass

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    18 parts531
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V2, the printed circuit board in 3D

    C5VRX JACK DIY V2

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0

Questions

What parts does the OvenControl use?

18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OvenControl KiCad files?

From the UVicRocketry/Prepreg-Oven repository on GitHub, at the commit this page was made from: the board is PCB/OvenControl/OvenControl.kicad_pcb and its schematic PCB/OvenControl/OvenControl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OvenControl design in my own project?

Its repository states no licence, so its author keeps all rights: ask UVicRocketry before reusing the design.