2 layers56 × 85 mm
RaspberyBoardV1
UND-ARC/Lander-Challenge
Code repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
23 parts
2 layers50 × 65.3 mm
BatteryBoardV1
UND-ARC/Lander-ChallengeCode repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
- Size
- 50 × 65.3 mm
- Copper layers
- 2
- Thickness
- 1.67 mm
- Parts
- 26
- Nets
- 11
- Pads
- 65
- Tracks, vias
- 133, 8
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Nov 2024
- Updated
- 22 Jun 2026
Overview
BatteryBoardV1 is an open-source printed circuit board by UND-ARC, from the UND-ARC/Lander-Challenge repository on GitHub. It is a 2-layer board of 50 × 65.3 mm with 26 parts on 11 nets, routed with 133 tracks and 8 vias.
It is built around the XT60PW-M20. Its parts include 10 capacitors, 5 resistors and 1 IC.
Main components
1Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | CAPC1005X55N | Library:CAPC1005X55N | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 4 | RES_ERA2AEB101X | Library:RES_ERA2AEB101X | R2, R3, R4, R5 |
| 1 | JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | JST 4 Pin 2.5mm |
| 1 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | JST 2 Pin 2mm |
| 1 | LOGO | LOGO | LOGO |
| 1 | PW14_TEX | Library:PW14_TEX | U1 |
| 1 | RES_WSLP5931_.002OHM_VIS | Library:RES_WSLP5931_.002OHM_VIS | R1 |
| 1 | SOT-223_STM | Library:SOT-223_STM | CR1 |
| 1 | XT60PWF | Library:XT60PWF | XT60F |
| 1 | XT60PWM | Library:XT60PWM | XT60M |
The 22 most common of 26 parts.
More from UND-ARC/Lander-Challenge
3- 2 layers168 × 56 mm
Initial Schematic
UND-ARC/Lander-Challenge
Code repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
20 parts - 2 layers57 × 86 mm
Sensor
UND-ARC/Lander-Challenge
Code repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
16 parts
Similar boards
- 4 layers65 × 100 mm
- 4 layers86.9 × 91.9 mm
- 2 layers57.3 × 19 mm
- 2 layers98 × 59.5 mm
MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm
- 2 layers86.1 × 86.1 mm
- 2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers20.3 × 34.8 mm
L0 ESP32
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
26 parts546MIT
Questions
How big is the BatteryBoardV1 PCB?
It measures 50 × 65.3 mm and has 2 copper layers, 1.67 mm thick.
What parts does the BatteryBoardV1 use?
26 parts, built around the XT60PW-M20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BatteryBoardV1 KiCad files?
From the UND-ARC/Lander-Challenge repository on GitHub, at the commit this page was made from: the board is Lander Controls/Sub-Scale PCB/Lander V1/BatteryBoardV1/BatteryBoardV1.kicad_pcb and its schematic Electronics and Design/Circuit Schematic and PCB Design/KiCAD Files/Initial Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BatteryBoardV1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask UND-ARC before reusing the design.