2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers29 × 29 mm
RTL8710-Breakout
Tylerflick/RTL8710-Breakout1Breakout board and component libraries for RTL8710 (RTL01) module.
- Size
- 29 × 29 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 23
- Pads
- 59
- Tracks, vias
- 129, 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Jan 2017
- Updated
- 31 Jan 2017
Overview
RTL8710-Breakout is an open-source printed circuit board by Tylerflick, from the Tylerflick/RTL8710-Breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 29 × 29 mm with 10 parts on 23 nets, routed with 129 tracks and 5 vias.
It is built around the LM1117-3.3. Its parts include 5 connectors, 2 capacitors, 2 ICs and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdRTL8710-Breakout
Breakout board and component libraries for RTL8710 (RTL01) module.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uf | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | CONN_01X02 | Connectors:CONN_2.54mm_1x2 | P5, P6 |
| 2 | CONN_01X09 | Connectors:CONN_2.54mm_1x9 | P2, P3 |
| 1 | CONN_01X05 | Connectors:CONN_2.54mm_1x5 | P1 |
| 1 | LM1117 | TO_SOT_Packages_SMD:SOT-223 | IC1 |
| 1 | Led_Small | LEDs:LED_0603 | D1 |
| 1 | RTL01-V1 | RTL8710:RTL01-V1 | U1 |
Similar boards
- 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers95.2 × 57.2 mm
- 2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 4 layers113.5 × 105.5 mm
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208 - 2 layers275 × 103 mm
- 2 layers43 × 34.3 mm
Questions
How big is the RTL8710-Breakout PCB?
It measures 29 × 29 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RTL8710-Breakout use?
10 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RTL8710-Breakout KiCad files?
From the Tylerflick/RTL8710-Breakout repository on GitHub, at the commit this page was made from: the board is RTL8710-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RTL8710-Breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).