Skip to the content
2 layers25 × 41.5 mmFalling Shapes Earrings, the printed circuit board in 3D

Falling Shapes Earrings

Tottocs/Falling-Shapes-Earrings1

Earrings that display a Tetris animation with an LED matrix. PCB designed in KiCad.

Size
25 × 41.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
35
Pads
118
Tracks, vias
67, 63
Pours
91
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Apr 2026
Updated
20 Sep 2026

Overview

Falling Shapes Earrings is an open-source printed circuit board by Tottocs, from the Tottocs/Falling-Shapes-Earrings repository on GitHub. It is a 2-layer board of 25 × 41.5 mm with 35 parts on 35 nets, routed with 67 tracks and 63 vias.

It is built around the WS2812B-2020-V6, CUS-12TB and SMTU1632-LF. Its parts include 20 diodes, 5 capacitors, 2 resistors, 1 IC and 1 switch. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

Falling Shapes Earrings

Earrings that display a falling shapes animation with an LED matrix. Made for my dear girlfriend. PCB designed in KiCad.

License

This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).

Commercial use is not permitted.

See the LICENSE file for details.

Parts

35
QtyValueFootprintReferences
20WS2812B-2020-V6Optoelectronics:WS2812B-2020-V6D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4
5100nFCapacitors:C0805_0.25C1, C2, C3, C4, C5
1+Test Points:2mm Test PadTP4
1-Test Points:2mm Test PadTP5
1100RResistors:R0805_0_25R2
110kResistors:R0805_0_25R1
1ATTINY85-20SURSO Packages:SOIC-8N (MS-012)U1
1CUS-12TBRelays and Switches:CUS12TBS1
1GNDTest Points:1mm Test PadTP3
1LED_DATTest Points:1mm Test PadTP1
1PWRTest Points:1mm Test PadTP2
1SMTU1632-LFPower Management:SMTU1632LFXBT1

Similar boards

  • 2 layers73 × 139 mmOpenRPNCalc, the printed circuit board in 3D

    OpenRPNCalc

    apoluekt/OpenRPNCalc

    Open-source and open-hardware scientific RPN calculator

    141 parts414CERN-OHL-P-2.0
  • 2 layers50.8 × 22.9 mmMounT K85 Feather, the printed circuit board in 3D

    MounT K85 Feather

    bkw777/MounT

    Mount an MCU board on a "Model T" computer

    10 parts12GPL-3.0
  • 2 layers100 × 71.2 mmULP Keyboard split L, the printed circuit board in 3D

    ULP Keyboard split L

    taichan1113/travelers-split-public

    Public KiCad release bundle for the Travelers Split keyboard hardware.

    52 parts9CERN-OHL-P-2.0
  • 2 layers70 × 55 mmCapsicum, the printed circuit board in 3D

    Capsicum

    hutscape/capsicum

    🫑 Retrofit a wired doorbell to add WiFi and make it connected 🔔

    80 parts2
  • 4 layers60 × 15 mmRing, the printed circuit board in 3D

    Ring

    KawaharaLab/ISWC2026_picoRingdual

    This repository contains the hardware design files, firmware, and evaluation applications for the dual-wearable system (Finger Ring and Wristband) presented in our ISWC 2026 paper.

    54 parts1
  • 2 layers57.3 × 39.1 mmMXHHKBLE KiCAD, the printed circuit board in 3D

    MXHHKBLE KiCAD

    byarmis/MXHHKBLE

    Using the Adafruit Feather, adding Bluetooth functionality to an HHKB

    15 partsMIT
  • 4 layers42.9 × 16 mmWeather pill, the printed circuit board in 3D

    Weather pill

    freder202/weather_pill

    An ultra low power weather data logger

    66 parts
  • 6 layers100 × 100 mmAp03b stm32, the printed circuit board in 3D

    Ap03b stm32

    leafony/ap03b-stm32

    Leafony AP03B STM32 Leaf

    446 parts

Questions

How big is the Falling Shapes Earrings PCB?

It measures 25 × 41.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Falling Shapes Earrings use?

35 parts, built around the WS2812B-2020-V6, CUS-12TB and SMTU1632-LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Falling Shapes Earrings KiCad files?

From the Tottocs/Falling-Shapes-Earrings repository on GitHub, at the commit this page was made from: the board is falling-shapes-earrings/falling-shapes-earrings.kicad_pcb and its schematic falling-shapes-earrings/falling-shapes-earrings.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Falling Shapes Earrings design in my own project?

Its repository states no licence, so its author keeps all rights: ask Tottocs before reusing the design.