
LineFollowerDriver3
Tonikiller10000/MotorDriver_1
An DC motor driver with integrated voltage boost-up converter using the TB6612FNG driver IC and MT3608 voltage step-up converter.

An DC motor driver with integrated voltage boost-up converter using the TB6612FNG driver IC and MT3608 voltage step-up converter.
LineFollowerDriver is an open-source printed circuit board by Tonikiller10000, from the Tonikiller10000/MotorDriver_1 repository on GitHub. It is a 2-layer board of 18 × 21 mm with 17 parts on 20 nets, routed with 138 tracks and 8 vias.
It is built around the MT3608. Its parts include 5 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 diode. It belongs with the robots and motor control boards of this library.
An DC motor driver made with the TB6612FNG driver IC. It contains an adittional optional MT3608 voltage boost-up converter to boost the battery voltage higher for the mottors. If all the components are solldered, you can chose between the battery boltage and the boosted voltage by making the wanted solder bridge. To choose the output voltage, the board has 2 additional DNP resistor pads used for an larger reach of precise voltages.
[!CAUTION] By connecting all 3 pads of the solder bridge, the input and the output of the boost-up converter are connected, witch is not recommended and may have an unexpected outcome including the IC being unusable.
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | DNP | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C3 |
| 1 | 14.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 22uH | Inductor_SMD:L_7.3x7.3_H4.5 | L1 |
| 1 | 2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | SS34_C183891 | Diode_SMD:D_SMA | D1 |
| 1 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U2 |
| 1 | VBC | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |

Tonikiller10000/MotorDriver_1
An DC motor driver with integrated voltage boost-up converter using the TB6612FNG driver IC and MT3608 voltage step-up converter.

Tonikiller10000/MotorDriver_1
An DC motor driver with integrated voltage boost-up converter using the TB6612FNG driver IC and MT3608 voltage step-up converter.

LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller


cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.

MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.

pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!

Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research

ranzbak/qmtech_minimig
KiCad design for a minimig compatible board for the QM_XC7A100T_DDR3 board.

pacmancoder/easy-pdk-mini
Padauk MCU programmer variant for hand soldering.
It measures 18 × 21 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tonikiller10000/MotorDriver_1 repository on GitHub, at the commit this page was made from: the board is Driver_V1.0/LineFollowerDriver.kicad_pcb and its schematic Driver_V1.0/LineFollowerDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tonikiller10000 before reusing the design.