2 layers78 × 60 mm
Buttons
Tolga-Cav/USB-Control-Panel-v1
PCB, CAD, and code for a general purpose usb flight control panel for DCS
17 parts
2 layers165 × 165 mm
Main Panel
Tolga-Cav/USB-Control-Panel-v1PCB, CAD, and code for a general purpose usb flight control panel for DCS
- Size
- 165 × 165 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 110
- Pads
- 384
- Tracks, vias
- 773, 76
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Sep 2025
- Updated
- 26 Jun 2026
Overview
Main Panel is an open-source printed circuit board by Tolga-Cav, from the Tolga-Cav/USB-Control-Panel-v1 repository on GitHub. It is a 2-layer board of 165 × 165 mm with 74 parts on 110 nets, routed with 773 tracks and 76 vias.
It is built around the TCA6424ARGJR and TLC5947DAP. Its parts include 39 resistors, 5 connectors, 4 capacitors and 3 ICs. It belongs with the RP2040 boards of this library.
Main components
2
TCA6424ARGJR
VQFN-32-EP(5x5)-40℃~+85℃ 1.65V~5.5V 10mA 1uA 2 230mV 24 25mA 4.1V 400kHz I2C、SMBus Interrupt Output Push-Pull Reset function、Cascading and address extension、Built-in LED driver、IO level configurable VQFN-32-EP(5x5) I/O Expanders ROHSTexas InstrumentsI/O Expanders
TLC5947DAP
HTSSOP-32-EP-6.1mm-40℃~+85℃ 2% 24 30MHz 30mA 3V~5.5V Built-in Over-Temperature Protection (OTP) PWM HTSSOP-32-EP-6.1mm LED Drivers ROHSTexas InstrumentsLED Drivers
README
README.mdSim-Control-Panel-v1.0
PCB, CAD, and code for a general purpose usb flight control panel for DCS
PCB Designed in KiCAD, CAD done in Autodesk Inventor
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +22 |
| 22 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22 +6 |
| 4 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_02x11_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x11_P2.54mm_Vertical | J1, J2 |
| 1 | 2460 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J5 |
| 1 | Heatsink_Pad | Control_Panel_Footprints:Heat Sink | HS1 |
| 1 | Pico | Control_Panel_Footprints:RPi_Pico_SMD_TH | U1 |
| 1 | TCA6424ARGJR | Control_Panel_Footprints:QFN50P500X500X60-33N-D | IC1 |
| 1 | TLC5947DAP | Package_SO:HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalVias | U2 |
More from Tolga-Cav/USB-Control-Panel-v1
4- 2 layers163 × 95 mm
Switches
Tolga-Cav/USB-Control-Panel-v1
PCB, CAD, and code for a general purpose usb flight control panel for DCS
15 parts - 2 layers80 × 25 mm
Potentiometers
Tolga-Cav/USB-Control-Panel-v1
PCB, CAD, and code for a general purpose usb flight control panel for DCS
8 parts - 2 layers80 × 30 mm
Encoders
Tolga-Cav/USB-Control-Panel-v1
PCB, CAD, and code for a general purpose usb flight control panel for DCS
7 parts
Similar boards
- 2 layers128 × 122 mm
AR20 PDM v1
align-racing-uia/power_distribution_module
This is the repository for Align Racing's formula student race car's different systems.
294 parts5 - 4 layers234.1 × 105.6 mm
Gameconsole
Nikhil-Krishnamurthy/Retro-Gaming-Handheld
This project was creating a gaming handheld from scratch, including cadding the case and designing the pcb. This handheld will run retro games up to the SNES.
118 parts1 - 2 layers21 × 51 mm
Usb shorts tester
pashutk/no-shorts
USB-C testing hat for Pi Pico: A KiCad project to detect soldering shorts in USB-C connectors
40 parts1 - 2 layers511.6 × 117.8 mm
- 2 layers76.2 × 50.8 mm
- 2 layers100 × 130.1 mm
BerlinUhr
designer2k2/BerlinUhr
Berlin Uhr or Mengenlehreuhr, a fancy retro style clock
62 parts7GPL-3.0 - 2 layers127 × 71 mm
- 2 layers127 × 114.3 mm
Questions
How big is the Main Panel PCB?
It measures 165 × 165 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main Panel use?
74 parts, built around the TCA6424ARGJR and TLC5947DAP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main Panel KiCad files?
From the Tolga-Cav/USB-Control-Panel-v1 repository on GitHub, at the commit this page was made from: the board is PCB/Main_Panel/Main_Panel.kicad_pcb and its schematic PCB/Buttons/Buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tolga-Cav before reusing the design.