

Gameconsole
This project was creating a gaming handheld from scratch, including cadding the case and designing the pcb. This handheld will run retro games up to the SNES.
- Size
- 234.1 × 105.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 116
- Pads
- 491
- Tracks, vias
- 1,389, 238
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 May 2026
- Updated
- 29 May 2026
Overview
Gameconsole is an open-source printed circuit board by Nikhil-Krishnamurthy, from the Nikhil-Krishnamurthy/Retro-Gaming-Handheld repository on GitHub. It is a 4-layer board of 234.1 × 105.6 mm with 118 parts on 116 nets, routed with 1,389 tracks and 238 vias.
It is built around the ESP32-S3-WROOM-1-N8, MP3302DJ-LF-Z and TCA6424ARGJR, with the TPS54331DR-JSM, 62684-401100ALF and B340A among its other parts. Its parts include 46 resistors, 29 capacitors, 6 ICs, 5 connectors and 2 diodes. It belongs with the retro computing and games boards and the ESP32 boards of this library.
Main components
8ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMP3302DJ-LF-Z
TSOT-23-5-40℃~+125℃ 1 1.3MHz 180mA 2.5V~6V 36V Analog、PWM Boost Built-in DC-DC Short Circuit Protection、Over Voltage Protection、Over-Temperature Protection (OTP)、LED open-circuit protection、Built-in soft-start TSOT-23-5 LED Drivers ROHSMonolithic Power SystemsLED DriversTCA6424ARGJR
VQFN-32-EP(5x5)-40℃~+85℃ 1.65V~5.5V 10mA 1uA 2 230mV 24 25mA 4.1V 400kHz I2C、SMBus Interrupt Output Push-Pull Reset function、Cascading and address extension、Built-in LED driver、IO level configurable VQFN-32-EP(5x5) I/O Expanders ROHSTexas InstrumentsI/O ExpandersTPS54331DR-JSM
SOP-8-40℃~+125℃ 1 2mA 3A 4.5V~40V 400kHz Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting Step-down type SOP-8 DC-DC Converters ROHSJSMSEMIDC-DC Converters62684-401100ALF
SMD,P=0.5mm,卧贴-55℃~+85℃ 0.5mm 2mm 40P Bottom Contact Gold Phosphor bronze Slide Lock Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSAmphenolFFC, FPC (Flat Flexible) Connector AssembliesB340A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 3A 40V 500mV@3A 500uA@40V 80A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesMBR0520LT1G
UncategorisedUnknown makerNTCLE413E2103F520L
--40℃~+105℃ 10kΩ 10mm 250mW 3435K 3mW/℃ 3mm 3mm 3mm ±1% ±1% - NTC Thermistors ROHSVishay IntertechnologyNTC Thermistors
README
README.mdRetro-Gaming-Handheld
This project was creating a gaming handheld from scratch, including cadding the case and designing the pcb. This handheld will run retro games up to the SNES.
Key Features
Esp32 powered emulation
RGB444 7in screen
Dedicated sound system
Cold swappable storage system
Rechargable 3500mAh battery
USB C data transfer to computer
USB C powered charging
Schematic
Power
Buttons
Screen
Data
Sound
ESP 32
PCB Layout
Case
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R10, R11, R12, R14, R17, R18, R19, R20, R30, R31, R32, R33, R34, R35, R36 +15 |
| 13 | PTS810 (250gf) | PTS810_SJM_250_SMTR_LFS:SW_PTS810_SJM_250_SMTR_LFS | A_Button1, B_Button1, DOWN1, LEFT1, MENU1, RIGHT1, SELECT_Button1, START_Button1, SW1, SW2, UP1, X_Button1, Y_Button1 |
| 10 | 10nF | GRM1885C1H103JA01D:CAPC1608X90N | C2, C9, C10, C11, C12, C13, C16, C23, C24, C29 |
| 8 | 10uF | CL31A106MBHNNNE:CAPC3216X180N | C1, C3, C5, C8, C14, C15, C17, C19 |
| 5 | SW_Push | TL3330AF130QG:SW_TL3330AF130QG | L_Button1, R_Button1, SW3, VOLDWN1, VOLUP1 |
| 3 | 100nF | CL10B104KB8NNNC:CAPC1608X90N | C4, C7, C20 |
| 2 | 4.7uF | CL31B475KAHNNNE:CAPC3216X180N | C21, C22 |
| 2 | 47uF | C3216X5R1E476M160AC:CAPC3216X180N | C25, C26 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
| 2 | EXB-2HV330JV | EXB-2HV330JV:RESCAXE50P380X160X55-16N | R2, R3 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | 0.047uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 1 | 0.47uF | CL10B474KA8NFNC:CAPC1608X90N | C6 |
| 1 | 1.43 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 10.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 1000pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27 |
| 1 | 165k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 240 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 29.4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
| 1 | 29.87k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 3.24k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 4.7uH | ul_IHLP1616BZER4R7M11:IND_IHLP-1616BZ_VIS | IHLP1616BZER4R7M11 |
| 1 | 47pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28 |
| 1 | 5.21K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 6.8uH | LIB_BMRA000606306R8MA1:INDPM7366X300N | L3 |
| 1 | 60.4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 62684-401100ALF | 62684-401100ALF:CONN_62684-401100ALF_AMP | J1 |
| 1 | 634k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | B340A | B340AE-13:DIOM5226X230N | D2 |
| 1 | BQ25895RTWR | BQ25895RTWR:QFN50P400X400X80-25N | U2 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | SDREADER1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | MAX98357AETE_T | MAX98357AETE_T:QFN50P300X300X80-17N | U5 |
| 1 | MBR0520LT1G | MBR0520LT1G:SOD3716X135N | D1 |
| 1 | MP3302DJ-LF-Z | MP3302DJ-LF-Z:TSOT23-5_3x3x1p7_MNP | U3 |
| 1 | NTCLE413E2103F520L | S2B-PH-K-S_LF__SN_:JST_S2B-PH-K-S_LF__SN_ | J3 |
| 1 | S2B-PH-K-S_LF__SN_ | S2B-PH-K-S_LF__SN_:JST_S2B-PH-K-S_LF__SN_ | J4 |
| 1 | S2B-XH-A_LF__SN_ | S2B-XH-A_LF__SN_:JST_S2B-XH-A_LF__SN_ | J5 |
| 1 | TCA6424ARGJR | TCA6424ARGJR:QFN50P500X500X60-33N | U4 |
| 1 | TPS54331DR | TPS54331DR:SOIC127P599X175-8N | U7 |
| 1 | USB4216-03-A_REVA | USB4216-03-A_REVA:GCT_USB4216-03-A_REVA | J2 |
| 1 | WE-MAPI_2512 | WE-MAPI_4020:WE-MAPI_4020 | L2 |
The 110 most common of 118 parts.
Similar boards
- 2 layers49.3 × 103.7 mm

- 4 layers268 × 152 mm

Drumboy Main
Randomwaves/Drumboy-Pro
📖 Developer Wiki — full hardware specs, schematics walkthrough, firmware architecture, DSP internals, and memory map.
346 parts10MIT - 2 layers

- 4 layers160 × 80 mm

- 4 layers120 × 108 mm

- 2 layers65 × 56 mm

Ras pi supercap ups
akuker/SuperUPS
This is a fork of the original Supercapacitor UPS board for a Raspberry Pi by Scott Baker, http://www.smbaker.com/
88 parts7 - 2 layers67 × 45 mm

- 4 layers90 × 120 mm

Body
mattybrad/bjarkardottir2
A synthesizer/guitar hybrid. Somewhere between a MIDI guitar and a synthesizer. Not commercially viable. A time sink. A rabbit hole. An obsession. A mistake. An exercise in blind faith. A reason to tidy the shed.
294 parts1
Questions
How big is the Gameconsole PCB?
It measures 234.1 × 105.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Gameconsole use?
118 parts, built around the ESP32-S3-WROOM-1-N8, MP3302DJ-LF-Z, TCA6424ARGJR and TPS54331DR-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gameconsole KiCad files?
From the Nikhil-Krishnamurthy/Retro-Gaming-Handheld repository on GitHub, at the commit this page was made from: the board is gameconsole/gameconsole.kicad_pcb and its schematic gameconsole/gameconsole.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gameconsole design in my own project?
Its repository states no licence, so its author keeps all rights: ask Nikhil-Krishnamurthy before reusing the design.