
Body2
mattybrad/bjarkardottir2
A synthesizer/guitar hybrid. Somewhere between a MIDI guitar and a synthesizer. Not commercially viable. A time sink. A rabbit hole. An obsession. A mistake. An exercise in blind faith. A reason to tidy the shed.

A synthesizer/guitar hybrid. Somewhere between a MIDI guitar and a synthesizer. Not commercially viable. A time sink. A rabbit hole. An obsession. A mistake. An exercise in blind faith. A reason to tidy the shed.
Body is an open-source printed circuit board by mattybrad, from the mattybrad/bjarkardottir2 repository on GitHub. It is a 4-layer board of 90 × 120 mm with 294 parts on 285 nets, routed with 1,076 tracks and 166 vias.
It is built around the TEENSY 4.1, SGTL5000XNLA3 and TL072, with the TPS54331DR-JSM, AP7313-18SAG and BAT54S among its other parts. Its parts include 63 capacitors, 48 resistors, 9 ICs, 7 diodes and 7 connectors. It belongs with the audio and music boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
A synthesizer/guitar hybrid. Somewhere between a MIDI guitar and a synthesizer. Not commercially viable. A time sink. A rabbit hole. An obsession. A mistake. An exercise in blind faith. A reason to tidy the shed. A sequel to a glass cannon.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 144 | perfboard_pin | bjarkarbody:perfboard pin | PB1, PB10, PB11, PB100, PB101, PB102, PB103, PB104, PB105, PB106, PB107, PB108, PB109, PB110, PB111, PB112 +128 |
| 12 | 2M | Resistor_SMD:R_0603_1608Metric | R15, R16, R17, R18, R25, R26, R27, R28, R35, R36, R37, R38 |
| 9 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C38, C40, C42, C44, C46, C48, C50, C52, C54 |
| 8 | 1u | Capacitor_SMD:C_0603_1608Metric | C14, C15, C25, C26, C36, C37, C60, C62 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R19, R20, R29, R30, R39, R40, R47 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C16, C17, C27, C28 |
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C39, C43, C45, C49, C51, C55 |
| 6 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296P_Horizontal | RV1, RV2, RV3, RV4, RV5, RV6 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C7, C8, C18, C19, C29, C30 |
| 6 | 18p | Capacitor_SMD:C_0603_1608Metric | C9, C10, C20, C21, C31, C32 |
| 6 | 1M | Resistor_SMD:R_0603_1608Metric | R13, R14, R23, R24, R33, R34 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R21, R22, R31, R32, R41, R42 |
| 6 | 1n | Capacitor_SMD:C_0603_1608Metric | C12, C13, C23, C24, C34, C35 |
| 6 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4, D5, D6 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | 47k | Resistor_SMD:R_0603_1608Metric | R3, R4, R6, R7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.15uF | Capacitor_SMD:C_0603_1608Metric | C41, C47, C53 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R43, R44, R45 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C11, C22, C33 |
| 3 | 600 | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3 |
| 3 | SGTL5000XNLA3 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U5, U6, U7 |
| 3 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 47R | Resistor_SMD:R_0603_1608Metric | R5, R8 |
| 1 | 1.8k | Resistor_SMD:R_0603_1608Metric | R48 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C57 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C58 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C61 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C59 |
| 1 | 22uF 16V | Capacitor_SMD:C_0805_2012Metric | C56 |
| 1 | 47uF | Capacitor_SMD:C_1210_3225Metric | C63 |
| 1 | 50k | Resistor_SMD:R_0603_1608Metric | R46 |
| 1 | 6.8uH | Inductor_SMD:L_Sunlord_SWPA6045S | L1 |
| 1 | AP7313-18SAG | Package_TO_SOT_SMD:SOT-23 | U9 |
| 1 | AudioJack3_SwitchTR | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J4 |
| 1 | B340A | Diode_SMD:D_SMA | D7 |
| 1 | BRIDGE_GROUND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | Battery_Power | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | External_connections | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J5 |
| 1 | FRETBOARD_CONNECTION | bjarkarbody:jst zh fretboard connector | J1 |
| 1 | GK3_socket | bjarkarbody:gk3 connector THT | J3 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | LOGO | bjarkarbody:bjorktv | G*** |
| 1 | OUTPUTS_234 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | TPS54331DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | Teensy4.1 | bjarkarbody:Teensy41_breakout | U1 |

mattybrad/bjarkardottir2
A synthesizer/guitar hybrid. Somewhere between a MIDI guitar and a synthesizer. Not commercially viable. A time sink. A rabbit hole. An obsession. A mistake. An exercise in blind faith. A reason to tidy the shed.

mattybrad/bjarkardottir2
A synthesizer/guitar hybrid. Somewhere between a MIDI guitar and a synthesizer. Not commercially viable. A time sink. A rabbit hole. An obsession. A mistake. An exercise in blind faith. A reason to tidy the shed.

mattybrad/bjarkardottir2
A synthesizer/guitar hybrid. Somewhere between a MIDI guitar and a synthesizer. Not commercially viable. A time sink. A rabbit hole. An obsession. A mistake. An exercise in blind faith. A reason to tidy the shed.



akuker/SuperUPS
This is a fork of the original Supercapacitor UPS board for a Raspberry Pi by Scott Baker, http://www.smbaker.com/


Nikhil-Krishnamurthy/Retro-Gaming-Handheld
This project was creating a gaming handheld from scratch, including cadding the case and designing the pcb. This handheld will run retro games up to the SNES.



It measures 90 × 120 mm and has 4 copper layers, 1.6 mm thick.
294 parts, built around the TEENSY 4.1, SGTL5000XNLA3, TL072 and TPS54331DR-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mattybrad/bjarkardottir2 repository on GitHub, at the commit this page was made from: the board is pcb/body/body.kicad_pcb and its schematic pcb/body/body.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mattybrad before reusing the design.